[PATCH 4/4] b43: N-PHY: some comments, function definion fix, missing calls

["Rafał Miłecki" <zajec5@gmail.com>]

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
  drivers/net/wireless/b43/phy_n.c |   19 ++++++++++++++-----
  1 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 6452cb3..c2c2602 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -315,7 +315,7 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
  }

  /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */
-void b43_nphy_bmac_clock_fgc(struct b43_wldev *dev, bool force)
+static void b43_nphy_bmac_clock_fgc(struct b43_wldev *dev, bool force)
  {
  	u32 tmslow;

@@ -454,6 +454,7 @@ static void b43_nphy_stay_in_carrier_search(struct b43_wldev *dev, bool enable)
  	}
  }

+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/GetTxGain */
  static struct nphy_txgains b43_nphy_get_tx_gains(struct b43_wldev *dev)
  {
  	struct b43_phy_n *nphy = dev->phy.n;
@@ -589,17 +590,22 @@ static void b43_nphy_bphy_init(struct b43_wldev *dev)
  	b43_phy_write(dev, B43_PHY_N_BMODE(0x38), 0x668);
  }

+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICal */
  static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type)
  {
  	//TODO
  }

+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICalRev3 */
  static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
  {
  	//TODO
  }

-/* RSSI Calibration */
+/*
+ * RSSI Calibration
+ * http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICal
+ */
  static void b43_nphy_rssi_cal(struct b43_wldev *dev)
  {
  	if (dev->phy.rev >= 3) {
@@ -611,7 +617,10 @@ static void b43_nphy_rssi_cal(struct b43_wldev *dev)
  	}
  }

-/* Restore RSSI Calibration */
+/*
+ * Restore RSSI Calibration
+ * http://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreRssiCal
+ */
  static void b43_nphy_restore_rssi_cal(struct b43_wldev *dev)
  {
  	//TODO
@@ -720,8 +729,8 @@ int b43_phy_initn(struct b43_wldev *dev)
  	b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
  	b43_nphy_pa_override(dev, true);

-	//TODO N PHY Classifier with arguments 0 and 0
-	//TODO N PHY Det Clip with 0 and the clip array as arguments
+	b43_nphy_classifier(dev, 0, 0);
+	b43_nphy_read_clip_detection(dev, clip);
  	tx_pwr_state = nphy->txpwrctrl;
  	//TODO N PHY TX power control with argument 0 (turning off power control)
  	//TODO Fix the TX Power Settings
-- 
1.6.4.2