r8723au module

r8723au module

[Sir l33tname]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hey,


Since r8723au is out I have tried it with every kernel version.
But every time the connection is flaky, it works fine in the beginning
but after ~2 - 5 minutes it stops routing packages get slow, but
it shows all the time connected (on my wlan widget). With 8723au build
from github, none of this problems exist. (Probably because I build
with out Bluetooth?)


Output of modinfo
https://gist.github.com/fliiiix/f32d8be6c7759e318088

Since I have no idea what you need to debug this, please just
ask for what I should try or what output do you like to see.

sincerely yours
l33tname
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
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=DtYX
-----END PGP SIGNATURE-----

Re: r8723au module

[Jes Sorensen]

Sir l33tname <l33tname@outlook.com> writes:
> Hey,
>
>
> Since r8723au is out I have tried it with every kernel version.
> But every time the connection is flaky, it works fine in the beginning
> but after ~2 - 5 minutes it stops routing packages get slow, but
> it shows all the time connected (on my wlan widget). With 8723au build
> from github, none of this problems exist. (Probably because I build
> with out Bluetooth?)
>
>
> Output of modinfo
> https://gist.github.com/fliiiix/f32d8be6c7759e318088
>
> Since I have no idea what you need to debug this, please just
> ask for what I should try or what output do you like to see.

Hi,

Can you provide some information about the wireless access point you are
connected to? Speeds, crypto used, etc.

Jes

Re: r8723au module

[Sir l33tname]

Hi,

# wl -i eth1 status
SSID: "janus"
Mode: Managed	RSSI: 0 dBm	SNR: 0 dB	noise: -90 dBm	Channel: 8l
BSSID: 2C:B0:5D:XX:XD:XX	Capability: ESS ShortSlot
Supported Rates: [ 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 ]
802.11N Capable:
	Chanspec: 2.4GHz channel 10 40MHz (0x2d0a)
	Control channel: 8
	802.11N Capabilities:
	Supported MCS : [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 32 ]

Security is WPA / WPA2 Personal with AES encription.

But I don't think that is has anything to do with my AP because other
people seems to have the same problem. One of them claimed that it work
better with 'iwconfig <device> freq 2.4G'.

yours sincerely

l33tname


On 10/14/2014 09:15 AM, Jes Sorensen wrote:
> Sir l33tname <l33tname@outlook.com> writes:
>> Hey,
>>
>>
>> Since r8723au is out I have tried it with every kernel version.
>> But every time the connection is flaky, it works fine in the beginning
>> but after ~2 - 5 minutes it stops routing packages get slow, but
>> it shows all the time connected (on my wlan widget). With 8723au build
>> from github, none of this problems exist. (Probably because I build
>> with out Bluetooth?)
>>
>>
>> Output of modinfo
>> https://gist.github.com/fliiiix/f32d8be6c7759e318088
>>
>> Since I have no idea what you need to debug this, please just
>> ask for what I should try or what output do you like to see.
> 
> Hi,
> 
> Can you provide some information about the wireless access point you are
> connected to? Speeds, crypto used, etc.
> 
> Jes