linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jes Sorensen <Jes.Sorensen@redhat.com>
To: Barry Day <briselec@gmail.com>
Cc: linux-wireless@vger.kernel.org, Kalle Valo <kvalo@codeaurora.org>
Subject: Re: [PATCH] rtl8xxxu: Fix fail to reconnect to AP
Date: Mon, 28 Nov 2016 23:02:30 -0500	[thread overview]
Message-ID: <wrfjzikjhr1l.fsf@redhat.com> (raw)
In-Reply-To: <20161129030137.GA7917@box64.home.org> (Barry Day's message of "Tue, 29 Nov 2016 13:01:46 +1000")

Barry Day <briselec@gmail.com> writes:
> Removed the report_connect functions as the h2c commands used are
> not required for a soft-mac driver and they prevent reconnecting to an
> AP for a couple of the chipsets.
>
> Signed-off-by: Barry Day <briselec@gmail.com>
> ---
>  rtl8xxxu.h       |  6 ------
>  rtl8xxxu_8192c.c |  1 -
>  rtl8xxxu_8192e.c |  1 -
>  rtl8xxxu_8723a.c |  1 -
>  rtl8xxxu_8723b.c |  1 -
>  rtl8xxxu_core.c  | 36 ------------------------------------
>  6 files changed, 46 deletions(-)

Hi Barry,

Does removing the h2c command on the 8723bu and 8192eu make the
reconnect process work properly?

Do you have any documentation justifying why this isn't needed on gen1
parts? I am rather cautious of just removing them, but we may remove the
call for gen2, at least until we understand better how that firmware
command really works.

Cheers,
Jes

> diff --git a/rtl8xxxu.h b/rtl8xxxu.h
> index df551b2..3b1f62d 100644
> --- a/rtl8xxxu.h
> +++ b/rtl8xxxu.h
> @@ -1335,8 +1335,6 @@ struct rtl8xxxu_fileops {
>  			      bool ht40);
>  	void (*update_rate_mask) (struct rtl8xxxu_priv *priv,
>  				  u32 ramask, int sgi);
> -	void (*report_connect) (struct rtl8xxxu_priv *priv,
> -				u8 macid, bool connect);
>  	void (*fill_txdesc) (struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
>  			     struct ieee80211_tx_info *tx_info,
>  			     struct rtl8xxxu_txdesc32 *tx_desc, bool sgi,
> @@ -1422,10 +1420,6 @@ void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv,
>  			       u32 ramask, int sgi);
>  void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv,
>  				    u32 ramask, int sgi);
> -void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv,
> -				  u8 macid, bool connect);
> -void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv,
> -				  u8 macid, bool connect);
>  void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv);
>  void rtl8xxxu_gen1_enable_rf(struct rtl8xxxu_priv *priv);
>  void rtl8xxxu_gen1_disable_rf(struct rtl8xxxu_priv *priv);
> diff --git a/rtl8xxxu_8192c.c b/rtl8xxxu_8192c.c
> index f9e2050..d5c37e0 100644
> --- a/rtl8xxxu_8192c.c
> +++ b/rtl8xxxu_8192c.c
> @@ -566,7 +566,6 @@ struct rtl8xxxu_fileops rtl8192cu_fops = {
>  	.usb_quirks = rtl8xxxu_gen1_usb_quirks,
>  	.set_tx_power = rtl8xxxu_gen1_set_tx_power,
>  	.update_rate_mask = rtl8xxxu_update_rate_mask,
> -	.report_connect = rtl8xxxu_gen1_report_connect,
>  	.fill_txdesc = rtl8xxxu_fill_txdesc_v1,
>  	.writeN_block_size = 128,
>  	.rx_agg_buf_size = 16000,
> diff --git a/rtl8xxxu_8192e.c b/rtl8xxxu_8192e.c
> index a1178c5..401aac4 100644
> --- a/rtl8xxxu_8192e.c
> +++ b/rtl8xxxu_8192e.c
> @@ -1648,7 +1648,6 @@ struct rtl8xxxu_fileops rtl8192eu_fops = {
>  	.usb_quirks = rtl8xxxu_gen2_usb_quirks,
>  	.set_tx_power = rtl8192e_set_tx_power,
>  	.update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
> -	.report_connect = rtl8xxxu_gen2_report_connect,
>  	.fill_txdesc = rtl8xxxu_fill_txdesc_v2,
>  	.writeN_block_size = 128,
>  	.tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
> diff --git a/rtl8xxxu_8723a.c b/rtl8xxxu_8723a.c
> index aef3730..9c13db5 100644
> --- a/rtl8xxxu_8723a.c
> +++ b/rtl8xxxu_8723a.c
> @@ -383,7 +383,6 @@ struct rtl8xxxu_fileops rtl8723au_fops = {
>  	.usb_quirks = rtl8xxxu_gen1_usb_quirks,
>  	.set_tx_power = rtl8xxxu_gen1_set_tx_power,
>  	.update_rate_mask = rtl8xxxu_update_rate_mask,
> -	.report_connect = rtl8xxxu_gen1_report_connect,
>  	.fill_txdesc = rtl8xxxu_fill_txdesc_v1,
>  	.writeN_block_size = 1024,
>  	.rx_agg_buf_size = 16000,
> diff --git a/rtl8xxxu_8723b.c b/rtl8xxxu_8723b.c
> index 02b8ddd..30dc66e 100644
> --- a/rtl8xxxu_8723b.c
> +++ b/rtl8xxxu_8723b.c
> @@ -1665,7 +1665,6 @@ struct rtl8xxxu_fileops rtl8723bu_fops = {
>  	.usb_quirks = rtl8xxxu_gen2_usb_quirks,
>  	.set_tx_power = rtl8723b_set_tx_power,
>  	.update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
> -	.report_connect = rtl8xxxu_gen2_report_connect,
>  	.fill_txdesc = rtl8xxxu_fill_txdesc_v2,
>  	.writeN_block_size = 1024,
>  	.tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
> diff --git a/rtl8xxxu_core.c b/rtl8xxxu_core.c
> index a9137ab..03e88d2 100644
> --- a/rtl8xxxu_core.c
> +++ b/rtl8xxxu_core.c
> @@ -4352,39 +4352,6 @@ void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv,
>  	rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.b_macid_cfg));
>  }
>  
> -void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv,
> -				  u8 macid, bool connect)
> -{
> -	struct h2c_cmd h2c;
> -
> -	memset(&h2c, 0, sizeof(struct h2c_cmd));
> -
> -	h2c.joinbss.cmd = H2C_JOIN_BSS_REPORT;
> -
> -	if (connect)
> -		h2c.joinbss.data = H2C_JOIN_BSS_CONNECT;
> -	else
> -		h2c.joinbss.data = H2C_JOIN_BSS_DISCONNECT;
> -
> -	rtl8xxxu_gen1_h2c_cmd(priv, &h2c, sizeof(h2c.joinbss));
> -}
> -
> -void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv,
> -				  u8 macid, bool connect)
> -{
> -	struct h2c_cmd h2c;
> -
> -	memset(&h2c, 0, sizeof(struct h2c_cmd));
> -
> -	h2c.media_status_rpt.cmd = H2C_8723B_MEDIA_STATUS_RPT;
> -	if (connect)
> -		h2c.media_status_rpt.parm |= BIT(0);
> -	else
> -		h2c.media_status_rpt.parm &= ~BIT(0);
> -
> -	rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt));
> -}
> -
>  void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv)
>  {
>  	u8 agg_ctrl, usb_spec, page_thresh, timeout;
> @@ -4525,13 +4492,10 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
>  			rtl8xxxu_write16(priv, REG_BCN_PSR_RPT,
>  					 0xc000 | bss_conf->aid);
>  
> -			priv->fops->report_connect(priv, 0, true);
>  		} else {
>  			val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL);
>  			val8 |= BEACON_DISABLE_TSF_UPDATE;
>  			rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8);
> -
> -			priv->fops->report_connect(priv, 0, false);
>  		}
>  	}

      reply	other threads:[~2016-11-29  4:02 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-29  3:01 [PATCH] rtl8xxxu: Fix fail to reconnect to AP Barry Day
2016-11-29  4:02 ` Jes Sorensen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=wrfjzikjhr1l.fsf@redhat.com \
    --to=jes.sorensen@redhat.com \
    --cc=briselec@gmail.com \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).