linux-wpan.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH wpan-tools 0/3] mac: info: interface: add basic support
@ 2014-09-26  8:06 Alexander Aring
  2014-09-26  8:06 ` [PATCH wpan-tools 1/3] mac: add support for setting lbt mode Alexander Aring
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: Alexander Aring @ 2014-09-26  8:06 UTC (permalink / raw)
  To: linux-wpan; +Cc: Alexander Aring

Hi,

this patch series add support for setting lbt mode and dump phy parameters and
mac interface parameters.

Each interface "could" have different mac parameters, because the mac sublayer
means mac algorithmn which are done by phy. These parameters need to be the same
on each interface. There are couple of mac sublayer parameters like ARET, CSMA,
promiscuous mode, etc... These parameters will be changed if an interface will
comming up, otherwise it's there but not running. Solution to run this device
with different parameter is first down all others interfaces and then up the interface
with the different parameters. (Difficult to explain maybe it's clear when you play a
little bit with that).

PHY settings will directly set registers to the driver. There is no mac functionality.
Only physical changes in radio frequency handling.

dump example for phy pib:

root@DistroKit:~ iwpan phy
wpan_phy phy0
supported channels:
        page 0: 11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26 
current_page: 0
current_channel: 26
cca_mode: 1
tx_power: 3

dump example for mac pib:

phy#0
        Interface mon0
                ifindex 5
                wpan_dev 0x2
                extended_addr 0x0000000000000000
                short_addr 0xffff
                pan_id 0xffff
                type monitor
                max_frame_retries 3
                max_be 5
                max_csma_backoffs 4
                min_be 3
                lbt 0
        Interface wpan0
                ifindex 2
                wpan_dev 0x1
                extended_addr 0xaaaaaaaaaaaaaaaa
                short_addr 0xffff
                pan_id 0xabcd
                type node
                max_frame_retries 3
                max_be 5
                max_csma_backoffs 4
                min_be 3
                lbt 0

I know there are a lot of other pib values. I don't forget these but it need
time to support it. I am still getting a state in the rework like mainline state.

Also it looks a little bit ugly but we can still change it for the wpan-tools. :-)

- Alex

Alexander Aring (3):
  mac: add support for setting lbt mode
  info: add support to dump phy pib
  interface: add dump for iface mac parameters

 src/Makefile.am |   1 +
 src/info.c      | 108 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 src/interface.c | 101 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 src/iwpan.h     |   3 ++
 src/mac.c       |  27 ++++++++++++++
 src/nl802154.h  |  13 +++++++
 src/nl_extras.h |   5 +++
 7 files changed, 258 insertions(+)
 create mode 100644 src/info.c

-- 
2.1.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2014-09-26  8:07 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-09-26  8:06 [PATCH wpan-tools 0/3] mac: info: interface: add basic support Alexander Aring
2014-09-26  8:06 ` [PATCH wpan-tools 1/3] mac: add support for setting lbt mode Alexander Aring
2014-09-26  8:06 ` [PATCH wpan-tools 2/3] info: add support to dump phy pib Alexander Aring
2014-09-26  8:06 ` [PATCH wpan-tools 3/3] interface: add dump for iface mac parameters Alexander Aring
2014-09-26  8:07 ` [PATCH wpan-tools 0/3] mac: info: interface: add basic support Alexander Aring

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).