[PATCH bluetooth-next 3/9] at86rf230: correct aret lifs and sifs handling

[Alexander Aring <alex.aring@gmail.com>]

This patch adds lifs/sifs handling only if max_frame_retries is above
zero. The at86rf2xx datasheets says nothing about phy lifs/sifs
handling. I asked the atmel support and they said lifs/sifs is done
by phy when max_frame_retries is above zero.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
---
 drivers/net/ieee802154/at86rf230.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 44d2f1d..2a25324 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -89,6 +89,7 @@ struct at86rf230_local {
 	struct at86rf230_state_change irq;
 
 	bool tx_aret;
+	s8 max_frame_retries;
 	bool is_tx;
 	/* spinlock for is_tx protection */
 	spinlock_t lock;
@@ -1001,6 +1002,9 @@ at86rf230_xmit(struct ieee802154_dev *dev, struct sk_buff *skb)
 		return -ETIMEDOUT;
 	}
 
+	if (lp->max_frame_retries > 0)
+		return 0;
+
 	/* Interfame spacing time, which is phy depend.
 	 * TODO
 	 * Move this handling in MAC 802.15.4 layer.
@@ -1230,6 +1234,7 @@ at86rf230_set_frame_retries(struct ieee802154_dev *dev, s8 retries)
 		return -EINVAL;
 
 	lp->tx_aret = retries >= 0;
+	lp->max_frame_retries = retries;
 
 	if (retries >= 0)
 		rc = at86rf230_write_subreg(lp, SR_MAX_FRAME_RETRIES, retries);
-- 
2.1.2