Linux IEEE 802.15.4 and 6LoWPAN development
 help / color / mirror / Atom feed
From: Alexander Aring <alex.aring@gmail.com>
To: linux-wpan@vger.kernel.org
Cc: kernel@pengutronix.de, mkl@pengutronix.de,
	Alexander Aring <alex.aring@gmail.com>
Subject: [PATCHv4 bluetooth-next 1/2] at86rf230: copy pdata to driver allocated space
Date: Tue, 24 Feb 2015 16:55:00 +0100	[thread overview]
Message-ID: <1424793301-29931-2-git-send-email-alex.aring@gmail.com> (raw)
In-Reply-To: <1424793301-29931-1-git-send-email-alex.aring@gmail.com>

This patch copies the platform data in driver allocated space at first.
With this change we ensure that we access the allocated platform data as
readonly space.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/ieee802154/at86rf230.c | 51 +++++++++++++++++++-------------------
 1 file changed, 25 insertions(+), 26 deletions(-)

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index cbfc8c5..9888b7f 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -1377,24 +1377,24 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	return at86rf230_write_subreg(lp, SR_SLOTTED_OPERATION, 0);
 }
 
-static struct at86rf230_platform_data *
-at86rf230_get_pdata(struct spi_device *spi)
+static int
+at86rf230_get_pdata(struct spi_device *spi, int *rstn, int *slp_tr)
 {
-	struct at86rf230_platform_data *pdata;
+	struct at86rf230_platform_data *pdata = spi->dev.platform_data;
 
-	if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node)
-		return spi->dev.platform_data;
+	if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node) {
+		if (!pdata)
+			return -ENOENT;
 
-	pdata = devm_kzalloc(&spi->dev, sizeof(*pdata), GFP_KERNEL);
-	if (!pdata)
-		goto done;
+		*rstn = pdata->rstn;
+		*slp_tr = pdata->slp_tr;
+		return 0;
+	}
 
-	pdata->rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0);
-	pdata->slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0);
+	*rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0);
+	*slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0);
 
-	spi->dev.platform_data = pdata;
-done:
-	return pdata;
+	return 0;
 }
 
 static int
@@ -1501,43 +1501,42 @@ at86rf230_setup_spi_messages(struct at86rf230_local *lp)
 
 static int at86rf230_probe(struct spi_device *spi)
 {
-	struct at86rf230_platform_data *pdata;
 	struct ieee802154_hw *hw;
 	struct at86rf230_local *lp;
 	unsigned int status;
-	int rc, irq_type;
+	int rc, irq_type, rstn, slp_tr;
 
 	if (!spi->irq) {
 		dev_err(&spi->dev, "no IRQ specified\n");
 		return -EINVAL;
 	}
 
-	pdata = at86rf230_get_pdata(spi);
-	if (!pdata) {
-		dev_err(&spi->dev, "no platform_data\n");
-		return -EINVAL;
+	rc = at86rf230_get_pdata(spi, &rstn, &slp_tr);
+	if (rc < 0) {
+		dev_err(&spi->dev, "failed to parse platform_data: %d\n", rc);
+		return rc;
 	}
 
-	if (gpio_is_valid(pdata->rstn)) {
-		rc = devm_gpio_request_one(&spi->dev, pdata->rstn,
+	if (gpio_is_valid(rstn)) {
+		rc = devm_gpio_request_one(&spi->dev, rstn,
 					   GPIOF_OUT_INIT_HIGH, "rstn");
 		if (rc)
 			return rc;
 	}
 
-	if (gpio_is_valid(pdata->slp_tr)) {
-		rc = devm_gpio_request_one(&spi->dev, pdata->slp_tr,
+	if (gpio_is_valid(slp_tr)) {
+		rc = devm_gpio_request_one(&spi->dev, slp_tr,
 					   GPIOF_OUT_INIT_LOW, "slp_tr");
 		if (rc)
 			return rc;
 	}
 
 	/* Reset */
-	if (gpio_is_valid(pdata->rstn)) {
+	if (gpio_is_valid(rstn)) {
 		udelay(1);
-		gpio_set_value(pdata->rstn, 0);
+		gpio_set_value(rstn, 0);
 		udelay(1);
-		gpio_set_value(pdata->rstn, 1);
+		gpio_set_value(rstn, 1);
 		usleep_range(120, 240);
 	}
 
-- 
2.3.0


  reply	other threads:[~2015-02-24 15:55 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-24 15:54 [PATCHv4 bluetooth-next 0/2] at86rf230: add support for xtal trim register Alexander Aring
2015-02-24 15:55 ` Alexander Aring [this message]
2015-02-24 15:55 ` [PATCHv4 bluetooth-next 2/2] at86rf230: add support for external xtal trim Alexander Aring
2015-02-24 16:17 ` [PATCHv4 bluetooth-next 0/2] at86rf230: add support for xtal trim register Marcel Holtmann
2015-02-24 16:50   ` Alexander Aring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1424793301-29931-2-git-send-email-alex.aring@gmail.com \
    --to=alex.aring@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-wpan@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox