From: Alexander Aring <alex.aring@gmail.com>
To: Baptiste Clenet <bapclenet@gmail.com>
Cc: Varka Bhadram <varkabhadram@gmail.com>, linux-wpan@vger.kernel.org
Subject: Re: ping6 doesn't use at86rf230 driver
Date: Wed, 1 Jul 2015 10:21:35 +0200 [thread overview]
Message-ID: <20150701082130.GA1834@omega> (raw)
In-Reply-To: <CAPpUg6N5SAY3fOio7zGnsOPkYytgx5gRgfULO5=6Tz+fcN-9PA@mail.gmail.com>
Hi,
On Tue, Jun 30, 2015 at 11:12:36AM +0200, Baptiste Clenet wrote:
....
>
> root@OpenWrt:/# dmesg | grep at86rf230
> [ 94.820000] at86rf230 spi32766.1: Detected at86rf212 chip version 3
> [ 94.830000] at86rf230 spi32766.1: unexcept state change from 0x00
> to 0x08. Actual state: 0x00
>
> It detects the chip but yes definitely, there is problem to read the state.
> Will check the pins
>
if you have debugfs support and mounted it, then you could dump all
register settings by doing something similar like:
cat /sys/kernel/debug/regmap/spi1.0/registers
result would be some $REGISTER <-> $VALUE mapping.
Note:
One interface of the 802.15.4 phy should be up for this development method,
because the transceiver isn't in sleep mode then.
- Alex
next prev parent reply other threads:[~2015-07-01 8:21 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-25 16:52 ping6 doesn't use at86rf230 driver Baptiste Clenet
2015-06-25 17:15 ` Alexander Aring
2015-06-25 17:30 ` Alexander Aring
2015-06-26 7:17 ` Baptiste Clenet
2015-06-26 7:20 ` Baptiste Clenet
2015-06-26 8:03 ` Alexander Aring
2015-06-26 8:24 ` Baptiste Clenet
2015-06-29 7:01 ` Baptiste Clenet
2015-06-29 8:09 ` Alexander Aring
2015-06-29 9:13 ` Varka Bhadram
2015-06-29 9:44 ` Baptiste Clenet
2015-06-29 11:44 ` Baptiste Clenet
2015-06-29 22:09 ` Alexander Aring
2015-06-30 9:12 ` Baptiste Clenet
2015-07-01 8:21 ` Alexander Aring [this message]
2015-07-01 9:22 ` Baptiste Clenet
2015-07-01 9:45 ` Baptiste Clenet
2015-07-01 11:59 ` Baptiste Clenet
2015-07-01 15:16 ` Alexander Aring
2015-07-02 15:02 ` Baptiste Clenet
2015-07-02 15:15 ` Baptiste Clenet
2015-07-02 16:12 ` Alexander Aring
2015-07-03 13:24 ` Baptiste Clenet
2015-07-03 13:37 ` Baptiste Clenet
2015-07-03 15:01 ` Baptiste Clenet
2015-07-03 15:47 ` Alexander Aring
2015-07-03 16:33 ` Baptiste Clenet
2015-07-03 17:37 ` Alexander Aring
2015-07-03 22:13 ` Baptiste Clenet
2015-07-04 15:36 ` Alexander Aring
2015-07-05 10:38 ` Baptiste Clenet
2015-07-08 8:35 ` Baptiste Clenet
2015-07-09 11:19 ` Baptiste Clenet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150701082130.GA1834@omega \
--to=alex.aring@gmail.com \
--cc=bapclenet@gmail.com \
--cc=linux-wpan@vger.kernel.org \
--cc=varkabhadram@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox