Re: [PATCH atusb/fw v2 2/3] atusb: fw: Update toolchain instructions

[Miquel Raynal <miquel.raynal@bootlin.com>]

Hi Alexander,

aahringo@redhat.com wrote on Sat, 15 Oct 2022 21:02:08 -0400:

> Hi,
> 
> On Sat, Oct 15, 2022 at 4:58 AM Miquel Raynal <miquel.raynal@bootlin.com> wrote:
> >
> > Hi Stefan,
> >
> > stefan@datenfreihafen.org wrote on Wed, 12 Oct 2022 19:54:49 +0200:
> >  
> > > Hello Miquel.
> > >
> > > On 06.09.22 10:21, Miquel Raynal wrote:  
> > > > Those instructions do not work anymore for several reaons:
> > > > - Two out of the three files to download return a 404 error:
> > > >        * The binutils version does not exist, it was 2.21.1 or 2.21.1a
> > > >          instead of just 2.21.
> > > >        * The avr-libc is no longer hosted on the pointed website, I've
> > > >          found an alternate.
> > > > - The binutils version mentioned is not able to compile the firmware on
> > > >    a recent distribution, the Internet advised to update its version and
> > > >    it worked.
> > > > - Most of these compilations will throw warnings if you use a recent
> > > >    gcc. Sometimes -Werror is set and it fails the build. To avoid that,
> > > >    just use --disable-werror in the ./configure options.
> > > > - I had issues building the gcc doc but those issues are trivial to
> > > >    fix inline.
> > > >
> > > > Update the instructions for building the toolchain and while at it,
> > > > start the file by mentioning that this is maybe not useful anymore, and
> > > > provide the packets to install.  
> > >
> > > I can see that it was a frustrating process to get this working. :/
> > > Sorry to hear. The truth is only a handful of people did ever build the firmware themself, I think. Even I have not done it in a while. (ugh, 5 years ago most likely judging from the git log).  
> >
> > Oh I'm not blaming anyone here ;)
> >
> > By the way I would like to make a another round of tests because during
> > my demos I could observe a wrong LQI, and I don't remember if the LQI
> > was valid before my changes or not. I haven't got the time yet to get
> > back to it. Or maybe the devices were too close to each other? I don't
> > know, I'll need to figure it out so we don't break a useful existing
> > feature.  
> 
> What is a wrong LQI here?

I just took the time to reproduce the demo, I get an LQI of 0xff with
both firmware versions (before and after my changes). There are 2
meters between the devices, isn't it enough?

Thanks,
Miquèl