From: "Michael C. Cambria" <mcc@fid4.com>
To: Alexander Aring <alex.aring@gmail.com>,
Christoffer Holmstedt <christoffer.holmstedt@gmail.com>
Cc: linux-wpan@vger.kernel.org
Subject: Re: RPi, Raspbian with openlabs transceiver - lib/tool versions and updated instructions(?)
Date: Wed, 06 May 2015 08:26:05 -0400 [thread overview]
Message-ID: <554A085D.9050509@fid4.com> (raw)
In-Reply-To: <20150506090821.GA1026@omega>
On 05/06/2015 05:08 AM, Alexander Aring wrote:
> On Wed, May 06, 2015 at 09:27:39AM +0200, Christoffer Holmstedt wrote:
>> I'm currently setting up my dev/test environment to get a "default"
>> working state to build upon but have stumbled upon some issues on the
>> way. I'm currently running Raspbian with latest bluetooth-next kernel.
>> U-Boot from last november. For libnl I use the default packages
>> available in Raspbian repository. wpan-tools I've checked out the 0.4
>> release from git repository.
>>
>> U-Boot: 2014-11-10 [1]
>> Raspbian version: 2015-02-16 (originally built with 3.18 kernel)
>> Bluetooth-next kernel 4.1.0-rc1+ 2015-04-30 [2]
>> libnl-3-dev version: 3.2.7-4 (Raspbian repository)
>> libnl-genl-3-dev version: 3.2.7-4 (Raspbian repository)
>> wpan-tools (tag: wpan-tools-0.4) [3]
>>
>> Is this set of libraries/tools ever going to work together or do I
>> have an obvious mismatch that will for sure fail?
>>
>> ### command failed: Device or resource busy (-16)
> I think this is because raspbian has running the ifplug deamon (ifplugd)
> which do an interface up if you want to do an interface down.
>
> Guenther documented this at [0]. Try to do a:
>
> kill $(ps awux | grep "[i]fplugd.*wpan0" | awk '{print $2}')
>
> into your shell. Then be sure that your interface is down before setting
> the pan_id.
I have been able to fix this at boot time by changing /etc/defaults/ifplugd
From:
INTERFACES="auto"
HOTPLUG_INTERFACES="all"
to:
INTERFACES="eth0"
HOTPLUG_INTERFACES="eth0"
> Also I saw you have two interfaces and the wpan0 smells like the
> fakelb(because zero mac address), I currently don't trust the fakelb
> transceiver. It's a poor driver which should be updated. So in your case
> you should use the wpan1 interface or remove the fakelb module by
> putting this module in your blacklist.
>
>
> more background about interface up and address settings:
>
> The reason why we doesn't allow this is because if the interface is up
> and we allow to change the address filter settings in this situation the
> locking mechanism is a lot of complicated while parsing the frame. To
> avoid that we simple say "it's a readonly variable when parsing the
> frame can be occur". The conclusion is we don't need any locking of this
> variable in a very "strong" context while parsing the frame. If the
> interface is down, the rtnl mutex is enough to protect this variable.
>
> The address filter will be filled when an interface up occurs again then.
>
> - Alex
>
> [0] https://honk.sigxcpu.org/piki/hw/rpi6lowpan/
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-05-06 12:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-06 7:27 RPi, Raspbian with openlabs transceiver - lib/tool versions and updated instructions(?) Christoffer Holmstedt
2015-05-06 9:08 ` Alexander Aring
2015-05-06 12:26 ` Michael C. Cambria [this message]
2015-05-07 7:37 ` Christoffer Holmstedt
2015-05-13 6:46 ` Guido Günther
[not found] ` <5549DA61.2040201@gmail.com>
2015-05-06 9:12 ` Fwd: " Varka Bhadram
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=554A085D.9050509@fid4.com \
--to=mcc@fid4.com \
--cc=alex.aring@gmail.com \
--cc=christoffer.holmstedt@gmail.com \
--cc=linux-wpan@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox