From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from lists.s-osg.org ([54.187.51.154]:60371 "EHLO lists.s-osg.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751694AbbH0M3M (ORCPT ); Thu, 27 Aug 2015 08:29:12 -0400 Subject: Re: [RFC bluetooth-next 00/21] mrf24j40: async rx/tx handling and new features References: <1439468568-22288-1-git-send-email-alex.aring@gmail.com> From: Stefan Schmidt Message-ID: <55DF0294.9040601@osg.samsung.com> Date: Thu, 27 Aug 2015 14:29:08 +0200 MIME-Version: 1.0 In-Reply-To: <1439468568-22288-1-git-send-email-alex.aring@gmail.com> Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-wpan-owner@vger.kernel.org List-ID: To: Alexander Aring , linux-wpan@vger.kernel.org Cc: kernel@pengutronix.de, alan@signal11.us, jonatan@myeden.se Hello. On 13/08/15 14:22, Alexander Aring wrote: > Hi, > > this patch series contains some cleanups, devicetree support, rx/tx async > handling, threaded irq to hardirq, csma params settings, cca mode settings, > cca energy detection levels, tx power settings and promiscuous mode settings. > > Also I add regmap support, the lowlevel spi calls are only used in hotpaths > for handling receive/transmit and irq handling. There are also some many > magic numbers, maybe we can introduce some register bits defines. > > First I will send this as RFC to get some respone if the patches looks fine > and acceptable for mainline. I waited for Alan to give some comments first here but he seems rather busy these days. I struggled a while to hook up my mrf24j40ma module to a Pi B+ but it works now and I have been testing this patchset with it. Nothing problematic showed up and especially the updates for newer stack features are good to see for in-tree drivers. You can have my Tested-by: Stefan Schmidt for the whole patchset. Review tags will individually while I go through it. regards Stefan Schmidt