From: Alexander Aring <aar@pengutronix.de>
To: Luca Zulberti <zulberti.luca@hotmail.it>
Cc: linux-wpan@vger.kernel.org, Rodolfo Giometti <giometti@enneenne.com>
Subject: Re: at86rf233 on AT91SAM9G35
Date: Mon, 15 Feb 2016 09:10:24 +0100 [thread overview]
Message-ID: <56C187F0.4050403@pengutronix.de> (raw)
In-Reply-To: <DUB115-W1015835A78DABA43B25FD538DA80@phx.gbl>
Hi,
sorry for my late reply.
Am 02/11/2016 um 08:59 AM schrieb Luca Zulberti:
> Good morning,
>
> I'm apologize for the previous email format.I have put the dts configuration and the output in these files.
>
> Best regards,
> Luca.
You said in a previous mail that you get a lot of
"irq 00 recevied"
for me looks like that you reading zeros only from the SPI bus.
I can't really help you, to setup the at86rf233 in your device tree looks a little
bit unusal but correct.
I can't help you here because this setup is very board-specific and has nothing
todo with linux-wpan project. Maybe contact the maintainers for AT91.
I don't see you muxing the SPI pins, but maybe it works because there was
a spidev before.
And also check your wiring. If it's connected to the right pins.
Please also cc linux-wpan in the next time, maybe somebody has exactly
your configuration.
- Alex
parent reply other threads:[~2016-02-15 8:10 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <DUB115-W1015835A78DABA43B25FD538DA80@phx.gbl>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56C187F0.4050403@pengutronix.de \
--to=aar@pengutronix.de \
--cc=giometti@enneenne.com \
--cc=linux-wpan@vger.kernel.org \
--cc=zulberti.luca@hotmail.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox