From: Stefan Schmidt <stefan@osg.samsung.com>
To: Alexander Aring <aar@pengutronix.de>, linux-wpan@vger.kernel.org
Cc: kernel@pengutronix.de, jukka.rissanen@linux.intel.com,
hannes@stressinduktion.org, mcr@sandelman.ca,
werner@almesberger.net
Subject: Re: [RFC bluetooth-next 07/19] 6lowpan: iphc: rename add lowpan prefix
Date: Wed, 23 Mar 2016 11:09:18 +0100 [thread overview]
Message-ID: <56F26B4E.80002@osg.samsung.com> (raw)
In-Reply-To: <1458652515-7862-8-git-send-email-aar@pengutronix.de>
Hello.
On 22/03/16 14:15, Alexander Aring wrote:
> This patch adds a lowpan prefix to each functions which doesn't have
> such prefix currently.
>
> Signed-off-by: Alexander Aring <aar@pengutronix.de>
> ---
> net/6lowpan/iphc.c | 56 ++++++++++++++++++++++++++++++------------------------
> 1 file changed, 31 insertions(+), 25 deletions(-)
>
> diff --git a/net/6lowpan/iphc.c b/net/6lowpan/iphc.c
> index 798d5b2..d5a72e3 100644
> --- a/net/6lowpan/iphc.c
> +++ b/net/6lowpan/iphc.c
> @@ -151,8 +151,8 @@
> #define LOWPAN_IPHC_CID_DCI(cid) (cid & 0x0f)
> #define LOWPAN_IPHC_CID_SCI(cid) ((cid & 0xf0) >> 4)
>
> -static inline void iphc_uncompress_eui64_lladdr(struct in6_addr *ipaddr,
> - const void *lladdr)
> +static inline void lowpan_iphc_uncompress_eui64_lladdr(struct in6_addr *ipaddr,
> + const void *lladdr)
> {
> /* fe:80::XXXX:XXXX:XXXX:XXXX
> * \_________________/
> @@ -167,8 +167,9 @@ static inline void iphc_uncompress_eui64_lladdr(struct in6_addr *ipaddr,
> ipaddr->s6_addr[8] ^= 0x02;
> }
>
> -static inline void iphc_uncompress_802154_lladdr(struct in6_addr *ipaddr,
> - const void *lladdr)
> +static inline void
> +lowpan_iphc_uncompress_802154_lladdr(struct in6_addr *ipaddr,
> + const void *lladdr)
> {
> const struct ieee802154_addr *addr = lladdr;
> u8 eui64[EUI64_ADDR_LEN] = { };
> @@ -176,7 +177,7 @@ static inline void iphc_uncompress_802154_lladdr(struct in6_addr *ipaddr,
> switch (addr->mode) {
> case IEEE802154_ADDR_LONG:
> ieee802154_le64_to_be64(eui64, &addr->extended_addr);
> - iphc_uncompress_eui64_lladdr(ipaddr, eui64);
> + lowpan_iphc_uncompress_eui64_lladdr(ipaddr, eui64);
> break;
> case IEEE802154_ADDR_SHORT:
> /* fe:80::ff:fe00:XXXX
> @@ -296,9 +297,10 @@ lowpan_iphc_ctx_get_by_mcast_addr(const struct net_device *dev,
> *
> * address_mode is the masked value for sam or dam value
> */
> -static int uncompress_addr(struct sk_buff *skb, const struct net_device *dev,
> - struct in6_addr *ipaddr, u8 address_mode,
> - const void *lladdr)
> +static int lowpan_iphc_uncompress_addr(struct sk_buff *skb,
> + const struct net_device *dev,
> + struct in6_addr *ipaddr,
> + u8 address_mode, const void *lladdr)
> {
> bool fail;
>
> @@ -329,10 +331,10 @@ static int uncompress_addr(struct sk_buff *skb, const struct net_device *dev,
> fail = false;
> switch (lowpan_dev(dev)->lltype) {
> case LOWPAN_LLTYPE_IEEE802154:
> - iphc_uncompress_802154_lladdr(ipaddr, lladdr);
> + lowpan_iphc_uncompress_802154_lladdr(ipaddr, lladdr);
> break;
> default:
> - iphc_uncompress_eui64_lladdr(ipaddr, lladdr);
> + lowpan_iphc_uncompress_eui64_lladdr(ipaddr, lladdr);
> break;
> }
> break;
> @@ -355,11 +357,11 @@ static int uncompress_addr(struct sk_buff *skb, const struct net_device *dev,
> /* Uncompress address function for source context
> * based address(non-multicast).
> */
> -static int uncompress_ctx_addr(struct sk_buff *skb,
> - const struct net_device *dev,
> - const struct lowpan_iphc_ctx *ctx,
> - struct in6_addr *ipaddr, u8 address_mode,
> - const void *lladdr)
> +static int lowpan_iphc_uncompress_ctx_addr(struct sk_buff *skb,
> + const struct net_device *dev,
> + const struct lowpan_iphc_ctx *ctx,
> + struct in6_addr *ipaddr,
> + u8 address_mode, const void *lladdr)
> {
> bool fail;
>
> @@ -390,10 +392,10 @@ static int uncompress_ctx_addr(struct sk_buff *skb,
> fail = false;
> switch (lowpan_dev(dev)->lltype) {
> case LOWPAN_LLTYPE_IEEE802154:
> - iphc_uncompress_802154_lladdr(ipaddr, lladdr);
> + lowpan_iphc_uncompress_802154_lladdr(ipaddr, lladdr);
> break;
> default:
> - iphc_uncompress_eui64_lladdr(ipaddr, lladdr);
> + lowpan_iphc_uncompress_eui64_lladdr(ipaddr, lladdr);
> break;
> }
> ipv6_addr_prefix_copy(ipaddr, &ctx->pfx, ctx->plen);
> @@ -660,14 +662,16 @@ int lowpan_header_decompress(struct sk_buff *skb, const struct net_device *dev,
> }
>
> pr_debug("SAC bit is set. Handle context based source address.\n");
> - err = uncompress_ctx_addr(skb, dev, ci, &hdr.saddr,
> - iphc1 & LOWPAN_IPHC_SAM_MASK, saddr);
> + err = lowpan_iphc_uncompress_ctx_addr(skb, dev, ci, &hdr.saddr,
> + iphc1 & LOWPAN_IPHC_SAM_MASK,
> + saddr);
> spin_unlock_bh(&lowpan_dev(dev)->ctx.lock);
> } else {
> /* Source address uncompression */
> pr_debug("source address stateless compression\n");
> - err = uncompress_addr(skb, dev, &hdr.saddr,
> - iphc1 & LOWPAN_IPHC_SAM_MASK, saddr);
> + err = lowpan_iphc_uncompress_addr(skb, dev, &hdr.saddr,
> + iphc1 & LOWPAN_IPHC_SAM_MASK,
> + saddr);
> }
>
> /* Check on error of previous branch */
> @@ -705,13 +709,15 @@ int lowpan_header_decompress(struct sk_buff *skb, const struct net_device *dev,
>
> /* Destination address context based uncompression */
> pr_debug("DAC bit is set. Handle context based destination address.\n");
> - err = uncompress_ctx_addr(skb, dev, ci, &hdr.daddr,
> - iphc1 & LOWPAN_IPHC_DAM_MASK, daddr);
> + err = lowpan_iphc_uncompress_ctx_addr(skb, dev, ci, &hdr.daddr,
> + iphc1 & LOWPAN_IPHC_DAM_MASK,
> + daddr);
> spin_unlock_bh(&lowpan_dev(dev)->ctx.lock);
> break;
> default:
> - err = uncompress_addr(skb, dev, &hdr.daddr,
> - iphc1 & LOWPAN_IPHC_DAM_MASK, daddr);
> + err = lowpan_iphc_uncompress_addr(skb, dev, &hdr.daddr,
> + iphc1 & LOWPAN_IPHC_DAM_MASK,
> + daddr);
> pr_debug("dest: stateless compression mode %d dest %pI6c\n",
> iphc1 & LOWPAN_IPHC_DAM_MASK, &hdr.daddr);
> break;
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
regards
Stefan Schmidt
next prev parent reply other threads:[~2016-03-23 10:09 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-22 13:14 [RFC bluetooth-next 00/19] 6lowpan: l2 neighbour data and short address Alexander Aring
2016-03-22 13:14 ` [RFC bluetooth-next 01/19] ieee802154: cleanups for ieee802154.h Alexander Aring
2016-03-23 9:59 ` Stefan Schmidt
2016-03-22 13:14 ` [RFC bluetooth-next 02/19] ieee802154: add short address helpers Alexander Aring
2016-03-23 9:59 ` Stefan Schmidt
2016-03-22 13:14 ` [RFC bluetooth-next 03/19] nl802154: avoid address change while running lowpan Alexander Aring
2016-03-23 9:59 ` Stefan Schmidt
2016-03-22 13:15 ` [RFC bluetooth-next 04/19] ieee802154: 6lowpan: fix short addr hash Alexander Aring
2016-03-23 9:58 ` Stefan Schmidt
2016-03-22 13:15 ` [RFC bluetooth-next 05/19] 6lowpan: change naming for lowpan private data Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 06/19] 6lowpan: move lowpan_802154_dev to 6lowpan Alexander Aring
2016-03-23 10:08 ` Stefan Schmidt
2016-03-22 13:15 ` [RFC bluetooth-next 07/19] 6lowpan: iphc: rename add lowpan prefix Alexander Aring
2016-03-23 10:09 ` Stefan Schmidt [this message]
2016-04-08 17:36 ` Marcel Holtmann
2016-04-11 17:00 ` Stefan Schmidt
2016-03-22 13:15 ` [RFC bluetooth-next 08/19] 6lowpan: iphc: remove unnecessary zero data Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 09/19] 6lowpan: move eui64 uncompress function Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 10/19] 6lowpan: add lowpan_is_ll function Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 11/19] 6lowpan: move mac802154 header Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 12/19] 6lowpan: add private neighbour data Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 13/19] addrconf: add 802.15.4 short addr slaac Alexander Aring
2016-03-23 10:50 ` Hannes Frederic Sowa
2016-04-05 8:20 ` Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 14/19] ndisc: add addr_len parameter to ndisc_opt_addr_space Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 15/19] ndisc: add addr_len parameter to ndisc_opt_addr_data Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 16/19] ndisc: add addr_len parameter to ndisc_fill_addr_option Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 17/19] ndisc: add short address to ndisc opts parsing Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 18/19] ndisc: add support for short address option Alexander Aring
2016-03-22 13:15 ` [RFC bluetooth-next 19/19] 6lowpan: add support for 802.15.4 short addr handling Alexander Aring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56F26B4E.80002@osg.samsung.com \
--to=stefan@osg.samsung.com \
--cc=aar@pengutronix.de \
--cc=hannes@stressinduktion.org \
--cc=jukka.rissanen@linux.intel.com \
--cc=kernel@pengutronix.de \
--cc=linux-wpan@vger.kernel.org \
--cc=mcr@sandelman.ca \
--cc=werner@almesberger.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox