* Re: Extreme slowness with xfs [WAS: Re: Slowness with new pc]
2008-11-23 22:25 ` Justin Piszcz
@ 2008-11-24 0:19 ` Stian Jordet
2008-11-24 9:50 ` Justin Piszcz
0 siblings, 1 reply; 14+ messages in thread
From: Stian Jordet @ 2008-11-24 0:19 UTC (permalink / raw)
To: Justin Piszcz; +Cc: linux-kernel, xfs
[-- Attachment #1: Type: text/plain, Size: 2718 bytes --]
sø., 23.11.2008 kl. 17.25 -0500, skrev Justin Piszcz:
> As the original posted stated:
>
> 1. please post dmesg output
> 2. you may want to include your kernel .config
> 3. xfs_info /dev/mdX or /dev/device may also be useful
> 4. you can also check fragmentation:
> # xfs_db -c frag -f /dev/md2
> actual 257492, ideal 242687, fragmentation factor 5.75%
> 5. something sounds very strange, I also run XFS on a lot of systems and
> have never heard of that before..
> 6. also post your /etc/fstab options
> 7. what distribution are you running?
> 8. are -only- the two fujitsu's (raid0) affected or are other arrays
> affected on this HW as well (separate disks etc)?
> 9. you can also compile in support for latency_top & power_top to see
> if there is any excessive polling going on by any one specific
> device/function as well
1 & 2: Oh, sorry I forgot to attach dmesg and config in the last mail.
3:
root@chevrolet:~# xfs_info /dev/sdb1
meta-data=/dev/sdb1 isize=256 agcount=32,
agsize=11426984 blks
= sectsz=512 attr=0
data = bsize=4096 blocks=365663488,
imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096
log =internal bsize=4096 blocks=32768, version=1
= sectsz=512 sunit=0 blks, lazy-count=0
realtime =none extsz=4096 blocks=0, rtextents=0
4:
root@chevrolet:~# xfs_db -c frag -f /dev/sdb1
actual 380037, ideal 373823, fragmentation factor 1.64%
6: The only mount-option is relatime, which Ubuntu adds automatically.
Hmm. I haven't tried to mount without that option. Well, didn't help
without it neither, tried just now.
7: Ubuntu 8.10 Intrepid. This is a new system, and it has never run
anything other than Intrepid. This affects both the standard kernel, and
the vanilla 2.6.27.7 that I have compiled (dmesg and config attached is
from that kernel). Have also tried both 64 bit and 32 bit (just for fun)
8: I'll explain my setup a little bit more. I explained the hardware in
my first post. But I have the two Fujitsu SAS disks in RAID-0,
with /dev/sda1 as root, and /dev/sda2 as home. Earlier they were both
xfs, and dog slow. I have now converted both to ext3, and everything is
normal. In addition I have four Seagate ST3500320AS 500GB SATA disks in
hardware RAID-5 on the same controller. This 1,5TB array is still xfs.
It also had and has the same symptoms.
9: I don't know how to do that. But what ever it is, it doesn't happen
with ext3...
Thanks for looking into this!
Regards,
Stian
[-- Attachment #2: config-2.6.27.7 --]
[-- Type: text/plain, Size: 45922 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.27.7
# Mon Nov 24 00:57:15 2008
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MM_OWNER=y
CONFIG_CGROUP_MEM_RES_CTLR=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_MARKERS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_USE_GENERIC_SMP_HELPERS=y
# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set
# CONFIG_X86_RDC321X is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CPU=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=64
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_HIGHPTE is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_IRQBALANCE=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_THERMAL is not set
CONFIG_ACPI_WMI=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
# CONFIG_ATM_LANE is not set
# CONFIG_ATM_BR2684 is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=y
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
# CONFIG_ATA_SFF is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
CONFIG_IGB=y
# CONFIG_IGB_LRO is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_HELPER_AUTO is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_UVESA=y
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
CONFIG_FB_IMAC=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=y
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=y
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=y
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_TRACING=y
CONFIG_FTRACE=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
CONFIG_CONTEXT_SWITCH_TRACER=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_MMIOTRACE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_SECURITY_SMACK=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not set
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
# CONFIG_CRYPTO_SALSA20_586 is not set
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_LGUEST is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
[-- Attachment #3: dmesg.txt --]
[-- Type: text/plain, Size: 51911 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27.7 (root@chevrolet) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Mon Nov 24 00:59:24 CET 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000099800 (usable)
[ 0.000000] BIOS-e820: 0000000000099800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff04000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bff04000 - 00000000bff05000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bff05000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0xbfef0 max_arch_pfn = 0x100000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[ 0.000000] ACPI: RSDP 000F64F0, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT BFEFCD57, 00D4 (r1 SMCSLP SUPERMIC 6040000 LTP 0)
[ 0.000000] ACPI: FACP BFF032EC, 00F4 (r3 INTEL STOAKLEY 6040000 PTL 3)
[ 0.000000] ACPI: DSDT BFEFE919, 495F (r1 Intel SEABURG 6040000 MSFT 3000001)
[ 0.000000] ACPI: FACS BFF04FC0, 0040
[ 0.000000] ACPI: DMAR BFF033E0, 00E0 (r1 Intel OEMDMAR 6040000 LOHR 1)
[ 0.000000] ACPI: TCPA BFF034C0, 0032 (r1 Intel STOAKLEY 6040000 LOHR 5A)
[ 0.000000] ACPI: APIC BFF034F2, 00D4 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: MCFG BFF035C6, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: HPET BFF03602, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
[ 0.000000] ACPI: BOOT BFF0363A, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SPCR BFF03662, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
[ 0.000000] ACPI: ERST BFF036B2, 0590 (r1 SMCI ERSTTBL 6040000 SMCI 1)
[ 0.000000] ACPI: HEST BFF03C42, 00A8 (r1 SMCI HESTTBL 6040000 SMCI 1)
[ 0.000000] ACPI: BERT BFF03CEA, 0030 (r1 SMCI BERTTBL 6040000 SMCI 1)
[ 0.000000] ACPI: EINJ BFF03D1A, 0170 (r1 SMCI EINJTBL 6040000 SMCI 1)
[ 0.000000] ACPI: SLIC BFF03E8A, 0176 (r1 SMCSLP SUPERMIC 6040000 LTP 0)
[ 0.000000] ACPI: SSDT BFEFE6BA, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT BFEFE614, 00A6 (r1 PmRef Cpu7Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT BFEFE56E, 00A6 (r1 PmRef Cpu6Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT BFEFE4C8, 00A6 (r1 PmRef Cpu5Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT BFEFE422, 00A6 (r1 PmRef Cpu4Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT BFEFE37C, 00A6 (r1 PmRef Cpu3Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT BFEFE2D6, 00A6 (r1 PmRef Cpu2Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT BFEFE230, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT BFEFCE2B, 1405 (r1 PmRef CpuPm 3000 INTL 20050228)
[ 0.000000] 2174MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00008000 - 0000f000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000200000 - 0000ad947c] TEXT DATA BSS ==> [0000200000 - 0000ad947c]
[ 0.000000] #4 [0000ada000 - 0000ade000] INIT_PG_TABLE ==> [0000ada000 - 0000ade000]
[ 0.000000] #5 [0000099800 - 0000100000] BIOS reserved ==> [0000099800 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f6520] 000f6520
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x000bfef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000099
[ 0.000000] 0: 0x00000100 -> 0x000bfef0
[ 0.000000] On node 0 totalpages: 786057
[ 0.000000] DMA zone: 3957 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 551890 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec88000, GSI 24-47
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec89000] gsi_base[48])
[ 0.000000] IOAPIC[2]: apic_id 10, version 32, address 0xfec89000, GSI 48-71
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 3 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] mapped IOAPIC to ffff9000 (fec88000)
[ 0.000000] mapped IOAPIC to ffff8000 (fec89000)
[ 0.000000] PM: Registered nosave memory: 0000000000099000 - 000000000009a000
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d6000
[ 0.000000] PM: Registered nosave memory: 00000000000d6000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[ 0.000000] PERCPU: Allocating 40156 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 8, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779147
[ 0.000000] Kernel command line: root=/dev/sda1 ro
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PMTIMER calibration value
[ 0.000000] Detected 2000.070 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 3105340k/3144640k available (5717k kernel code, 37936k reserved, 2263k data, 356k init, 2227136k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc79000 - 0xfffff000 (3608 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc09d4000 - 0xc0a2d000 ( 356 kB)
[ 0.004000] .data : 0xc079573c - 0xc09cb6cc (2263 kB)
[ 0.004000] .text : 0xc0200000 - 0xc079573c (5717 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.14 BogoMIPS (lpj=8000280)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] Intel machine check architecture supported.
[ 0.004000] Intel machine check reporting enabled on CPU#0.
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.016841] ACPI: Core revision 20080609
[ 0.028324] ENABLING IO-APIC IRQs
[ 0.028543] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070056] CPU0: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06
[ 0.072004] Booting processor 1/4 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4000.20 BogoMIPS (lpj=8000400)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] Intel machine check architecture supported.
[ 0.004000] Intel machine check reporting enabled on CPU#1.
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.158191] CPU1: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06
[ 0.158636] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160073] Booting processor 2/1 ip 6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 4000.16 BogoMIPS (lpj=8000330)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] Intel machine check architecture supported.
[ 0.004000] Intel machine check reporting enabled on CPU#2.
[ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.254194] CPU2: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06
[ 0.254643] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.256123] Booting processor 3/5 ip 6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 4000.19 BogoMIPS (lpj=8000382)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] Intel machine check architecture supported.
[ 0.004000] Intel machine check reporting enabled on CPU#3.
[ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.350197] CPU3: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06
[ 0.350643] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.352085] Booting processor 4/2 ip 6000
[ 0.004000] Initializing CPU#4
[ 0.004000] Calibrating delay using timer specific routine.. 4000.16 BogoMIPS (lpj=8000333)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 2
[ 0.004000] Intel machine check architecture supported.
[ 0.004000] Intel machine check reporting enabled on CPU#4.
[ 0.004000] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
[ 0.446249] CPU4: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06
[ 0.446697] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.448089] Booting processor 5/6 ip 6000
[ 0.004000] Initializing CPU#5
[ 0.004000] Calibrating delay using timer specific routine.. 4000.18 BogoMIPS (lpj=8000365)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 2
[ 0.004000] Intel machine check architecture supported.
[ 0.004000] Intel machine check reporting enabled on CPU#5.
[ 0.004000] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
[ 0.542197] CPU5: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06
[ 0.542646] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.544104] Booting processor 6/3 ip 6000
[ 0.004000] Initializing CPU#6
[ 0.004000] Calibrating delay using timer specific routine.. 4000.16 BogoMIPS (lpj=8000334)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 3
[ 0.004000] Intel machine check architecture supported.
[ 0.004000] Intel machine check reporting enabled on CPU#6.
[ 0.004000] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
[ 0.638256] CPU6: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06
[ 0.638704] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.640099] Booting processor 7/7 ip 6000
[ 0.004000] Initializing CPU#7
[ 0.004000] Calibrating delay using timer specific routine.. 4000.18 BogoMIPS (lpj=8000371)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 3
[ 0.004000] Intel machine check architecture supported.
[ 0.004000] Intel machine check reporting enabled on CPU#7.
[ 0.004000] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
[ 0.734209] CPU7: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06
[ 0.734658] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.736039] Brought up 8 CPUs
[ 0.736077] Total of 8 processors activated (32001.39 BogoMIPS).
[ 0.736145] CPU0 attaching sched-domain:
[ 0.736148] domain 0: span 0,2 level MC
[ 0.736150] groups: 0 2
[ 0.736154] domain 1: span 0-7 level CPU
[ 0.736156] groups: 0,2 1,3 4,6 5,7
[ 0.736163] CPU1 attaching sched-domain:
[ 0.736165] domain 0: span 1,3 level MC
[ 0.736167] groups: 1 3
[ 0.736170] domain 1: span 0-7 level CPU
[ 0.736172] groups: 1,3 4,6 5,7 0,2
[ 0.736177] CPU2 attaching sched-domain:
[ 0.736179] domain 0: span 0,2 level MC
[ 0.736181] groups: 2 0
[ 0.736184] domain 1: span 0-7 level CPU
[ 0.736186] groups: 0,2 1,3 4,6 5,7
[ 0.736190] CPU3 attaching sched-domain:
[ 0.736192] domain 0: span 1,3 level MC
[ 0.736194] groups: 3 1
[ 0.736197] domain 1: span 0-7 level CPU
[ 0.736199] groups: 1,3 4,6 5,7 0,2
[ 0.736204] CPU4 attaching sched-domain:
[ 0.736206] domain 0: span 4,6 level MC
[ 0.736208] groups: 4 6
[ 0.736211] domain 1: span 0-7 level CPU
[ 0.736213] groups: 4,6 5,7 0,2 1,3
[ 0.736218] CPU5 attaching sched-domain:
[ 0.736220] domain 0: span 5,7 level MC
[ 0.736222] groups: 5 7
[ 0.736224] domain 1: span 0-7 level CPU
[ 0.736226] groups: 5,7 0,2 1,3 4,6
[ 0.736232] CPU6 attaching sched-domain:
[ 0.736234] domain 0: span 4,6 level MC
[ 0.736235] groups: 6 4
[ 0.736238] domain 1: span 0-7 level CPU
[ 0.736240] groups: 4,6 5,7 0,2 1,3
[ 0.736245] CPU7 attaching sched-domain:
[ 0.736247] domain 0: span 5,7 level MC
[ 0.736249] groups: 7 5
[ 0.736252] domain 1: span 0-7 level CPU
[ 0.736254] groups: 5,7 0,2 1,3 4,6
[ 0.736446] net_namespace: 324 bytes
[ 0.736446] Time: 1:04:10 Date: 11/24/08
[ 0.736446] NET: Registered protocol family 16
[ 0.740088] No dock devices found.
[ 0.740136] ACPI: bus type pci registered
[ 0.740136] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8
[ 0.740136] PCI: MCFG area at e0000000 reserved in E820
[ 0.740141] PCI: Using MMCONFIG for extended config space
[ 0.740180] PCI: Using configuration type 1 for base access
[ 0.744497] ACPI: EC: Look up EC in DSDT
[ 0.748078] ACPI: Interpreter enabled
[ 0.748118] ACPI: (supports S0 S1 S4 S5)
[ 0.748271] ACPI: Using IOAPIC for interrupt routing
[ 0.752481] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.752481] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.752481] pci 0000:00:00.0: PME# disabled
[ 0.752481] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.752481] pci 0000:00:01.0: PME# disabled
[ 0.752481] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.752481] pci 0000:00:05.0: PME# disabled
[ 0.752481] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.752481] pci 0000:00:09.0: PME# disabled
[ 0.752520] PCI: 0000:00:0f.0 reg 10 64bit mmio: [fe700000, fe703fff]
[ 0.752816] PCI: 0000:00:1b.0 reg 10 64bit mmio: [d0804000, d0807fff]
[ 0.752851] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.752893] pci 0000:00:1b.0: PME# disabled
[ 0.752974] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.753015] pci 0000:00:1c.0: PME# disabled
[ 0.753089] PCI: 0000:00:1d.0 reg 20 io port: [1800, 181f]
[ 0.753133] PCI: 0000:00:1d.1 reg 20 io port: [1820, 183f]
[ 0.753177] PCI: 0000:00:1d.2 reg 20 io port: [1840, 185f]
[ 0.753231] PCI: 0000:00:1d.3 reg 20 io port: [1860, 187f]
[ 0.753285] PCI: 0000:00:1d.7 reg 10 32bit mmio: [d0808000, d08083ff]
[ 0.753328] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.753370] pci 0000:00:1d.7: PME# disabled
[ 0.753509] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
[ 0.753515] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
[ 0.753521] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
[ 0.753527] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
[ 0.753533] PCI: 0000:00:1f.1 reg 20 io port: [1880, 188f]
[ 0.753569] PCI: 0000:00:1f.2 reg 10 io port: [18c0, 18c7]
[ 0.753575] PCI: 0000:00:1f.2 reg 14 io port: [18b8, 18bb]
[ 0.753580] PCI: 0000:00:1f.2 reg 18 io port: [18b0, 18b7]
[ 0.753585] PCI: 0000:00:1f.2 reg 1c io port: [1894, 1897]
[ 0.753591] PCI: 0000:00:1f.2 reg 20 io port: [18a0, 18af]
[ 0.753596] PCI: 0000:00:1f.2 reg 24 32bit mmio: [d0808400, d08087ff]
[ 0.753613] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.753653] pci 0000:00:1f.2: PME# disabled
[ 0.753729] PCI: 0000:00:1f.3 reg 20 io port: [1100, 111f]
[ 0.756090] PCI: 0000:02:00.0 reg 10 64bit mmio: [c0000000, cfffffff]
[ 0.756099] PCI: 0000:02:00.0 reg 18 64bit mmio: [d0300000, d030ffff]
[ 0.756106] PCI: 0000:02:00.0 reg 20 io port: [2000, 20ff]
[ 0.756115] PCI: 0000:02:00.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.756130] pci 0000:02:00.0: supports D1
[ 0.756131] pci 0000:02:00.0: supports D2
[ 0.756156] PCI: 0000:02:00.1 reg 10 64bit mmio: [d0310000, d0313fff]
[ 0.756188] pci 0000:02:00.1: supports D1
[ 0.756189] pci 0000:02:00.1: supports D2
[ 0.756226] PCI: bridge 0000:00:05.0 io port: [2000, 2fff]
[ 0.756229] PCI: bridge 0000:00:05.0 32bit mmio: [d0300000, d03fffff]
[ 0.756233] PCI: bridge 0000:00:05.0 64bit mmio pref: [c0000000, cfffffff]
[ 0.756276] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.756318] pci 0000:03:00.0: PME# disabled
[ 0.756397] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
[ 0.756438] pci 0000:03:00.3: PME# disabled
[ 0.756510] PCI: bridge 0000:00:09.0 32bit mmio: [d0000000, d02fffff]
[ 0.756559] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.756600] pci 0000:04:00.0: PME# disabled
[ 0.756668] PCI: bridge 0000:03:00.0 32bit mmio: [d0000000, d01fffff]
[ 0.756713] PCI: 0000:05:00.0 reg 10 64bit mmio: [d0000000, d01fffff]
[ 0.756739] PCI: 0000:05:00.0 reg 30 32bit mmio: [0, 7ffff]
[ 0.756759] pci 0000:05:00.0: supports D1
[ 0.756791] PCI: bridge 0000:04:00.0 32bit mmio: [d0000000, d01fffff]
[ 0.756899] PCI: 0000:07:00.0 reg 10 32bit mmio: [d0420000, d043ffff]
[ 0.756908] PCI: 0000:07:00.0 reg 14 32bit mmio: [d0400000, d041ffff]
[ 0.756916] PCI: 0000:07:00.0 reg 18 io port: [3000, 301f]
[ 0.756924] PCI: 0000:07:00.0 reg 1c 32bit mmio: [d0480000, d0483fff]
[ 0.756944] PCI: 0000:07:00.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.756970] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.757013] pci 0000:07:00.0: PME# disabled
[ 0.757093] PCI: 0000:07:00.1 reg 10 32bit mmio: [d0460000, d047ffff]
[ 0.757102] PCI: 0000:07:00.1 reg 14 32bit mmio: [d0440000, d045ffff]
[ 0.757110] PCI: 0000:07:00.1 reg 18 io port: [3020, 303f]
[ 0.757119] PCI: 0000:07:00.1 reg 1c 32bit mmio: [d0484000, d0487fff]
[ 0.757138] PCI: 0000:07:00.1 reg 30 32bit mmio: [0, 1ffff]
[ 0.757164] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
[ 0.757207] pci 0000:07:00.1: PME# disabled
[ 0.757283] PCI: bridge 0000:00:1c.0 io port: [3000, 3fff]
[ 0.757286] PCI: bridge 0000:00:1c.0 32bit mmio: [d0400000, d04fffff]
[ 0.757334] PCI: 0000:08:08.0 reg 10 32bit mmio: [d0504000, d05047ff]
[ 0.757341] PCI: 0000:08:08.0 reg 14 32bit mmio: [d0500000, d0503fff]
[ 0.757381] pci 0000:08:08.0: supports D1
[ 0.757383] pci 0000:08:08.0: supports D2
[ 0.757384] pci 0000:08:08.0: PME# supported from D0 D1 D2 D3hot
[ 0.757427] pci 0000:08:08.0: PME# disabled
[ 0.757493] pci 0000:00:1e.0: transparent bridge
[ 0.757535] PCI: bridge 0000:00:1e.0 32bit mmio: [d0500000, d05fffff]
[ 0.757557] bus 00 -> node 0
[ 0.757563] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.757931] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.758054] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.758175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.758254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMF0._PRT]
[ 0.758333] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMF0.BPD0._PRT]
[ 0.758455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9.BMF3._PRT]
[ 0.758637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.758766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.768410] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.768545] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.768972] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.772347] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.772835] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.773262] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 *11 14 15)
[ 0.773663] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *9
[ 0.774116] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15)
[ 0.774481] ACPI: WMI: Mapper loaded
[ 0.774481] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.774481] pnp: PnP ACPI init
[ 0.774481] ACPI: bus type pnp registered
[ 0.776768] pnp: PnP ACPI: found 14 devices
[ 0.776768] ACPI: ACPI bus type pnp unregistered
[ 0.780136] SCSI subsystem initialized
[ 0.780136] libata version 3.00 loaded.
[ 0.780136] usbcore: registered new interface driver usbfs
[ 0.780136] usbcore: registered new interface driver hub
[ 0.780136] usbcore: registered new device driver usb
[ 0.780136] dca service started, version 1.4
[ 0.780136] PCI: Using ACPI for IRQ routing
[ 0.788039] NET: Registered protocol family 8
[ 0.788079] NET: Registered protocol family 20
[ 0.788134] NetLabel: Initializing
[ 0.788134] NetLabel: domain hash size = 128
[ 0.788134] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.788160] NetLabel: unlabeled traffic allowed by default
[ 0.788203] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.788349] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.791353] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.791394] actual entries 65620
[ 0.791494] ACPI: RTC can wake from S4
[ 0.792039] Switched to high resolution mode on CPU 0
[ 0.794740] Switched to high resolution mode on CPU 5
[ 0.794747] Switched to high resolution mode on CPU 3
[ 0.794765] Switched to high resolution mode on CPU 2
[ 0.794771] Switched to high resolution mode on CPU 7
[ 0.794792] Switched to high resolution mode on CPU 4
[ 0.794796] Switched to high resolution mode on CPU 6
[ 0.795492] Switched to high resolution mode on CPU 1
[ 0.800022] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.800063] system 00:01: ioport range 0x295-0x296 has been reserved
[ 0.800104] system 00:01: ioport range 0xca2-0xca3 has been reserved
[ 0.800145] system 00:01: ioport range 0xca8-0xcaf has been reserved
[ 0.800186] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.800227] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.800269] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 0.800310] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.800351] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.800400] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 0.800449] system 00:01: iomem range 0xfec88000-0xfec88fff has been reserved
[ 0.800491] system 00:01: iomem range 0xfec89000-0xfec89fff has been reserved
[ 0.800533] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.800575] system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved
[ 0.800616] system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved
[ 0.800658] system 00:01: iomem range 0xfed20000-0xfed44fff has been reserved
[ 0.800700] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.836071] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.836111] pci 0000:00:01.0: IO window: disabled
[ 0.836152] pci 0000:00:01.0: MEM window: disabled
[ 0.836192] pci 0000:00:01.0: PREFETCH window: disabled
[ 0.836235] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
[ 0.836276] pci 0000:00:05.0: IO window: 0x2000-0x2fff
[ 0.836317] pci 0000:00:05.0: MEM window: 0xd0300000-0xd03fffff
[ 0.837103] pci 0000:00:05.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.837155] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
[ 0.837195] pci 0000:04:00.0: IO window: disabled
[ 0.837237] pci 0000:04:00.0: MEM window: 0xd0000000-0xd01fffff
[ 0.837279] pci 0000:04:00.0: PREFETCH window: 0x000000d0600000-0x000000d06fffff
[ 0.837330] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
[ 0.837370] pci 0000:03:00.0: IO window: disabled
[ 0.837412] pci 0000:03:00.0: MEM window: 0xd0000000-0xd01fffff
[ 0.837454] pci 0000:03:00.0: PREFETCH window: 0x000000d0600000-0x000000d06fffff
[ 0.837506] pci 0000:03:00.3: PCI bridge, secondary bus 0000:06
[ 0.837546] pci 0000:03:00.3: IO window: disabled
[ 0.837586] pci 0000:03:00.3: MEM window: disabled
[ 0.837627] pci 0000:03:00.3: PREFETCH window: disabled
[ 0.837669] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[ 0.837709] pci 0000:00:09.0: IO window: disabled
[ 0.837750] pci 0000:00:09.0: MEM window: 0xd0000000-0xd02fffff
[ 0.837791] pci 0000:00:09.0: PREFETCH window: 0x000000d0600000-0x000000d06fffff
[ 0.837843] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:07
[ 0.837884] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.837926] pci 0000:00:1c.0: MEM window: 0xd0400000-0xd04fffff
[ 0.837968] pci 0000:00:1c.0: PREFETCH window: 0x000000d0700000-0x000000d07fffff
[ 0.838020] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[ 0.838059] pci 0000:00:1e.0: IO window: disabled
[ 0.838101] pci 0000:00:1e.0: MEM window: 0xd0500000-0xd05fffff
[ 0.838142] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.838194] pci 0000:00:01.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
[ 0.838236] pci 0000:00:01.0: setting latency timer to 64
[ 0.838243] pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
[ 0.838285] pci 0000:00:05.0: setting latency timer to 64
[ 0.838291] pci 0000:00:09.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
[ 0.838333] pci 0000:00:09.0: setting latency timer to 64
[ 0.838339] pci 0000:03:00.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
[ 0.838382] pci 0000:03:00.0: setting latency timer to 64
[ 0.838388] pci 0000:04:00.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
[ 0.838431] pci 0000:04:00.0: setting latency timer to 64
[ 0.838438] pci 0000:03:00.3: setting latency timer to 64
[ 0.838445] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.838487] pci 0000:00:1c.0: setting latency timer to 64
[ 0.838493] pci 0000:00:1e.0: setting latency timer to 64
[ 0.838497] bus: 00 index 0 io port: [0, ffff]
[ 0.838535] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 0.838575] bus: 01 index 0 mmio: [0, 0]
[ 0.838614] bus: 01 index 1 mmio: [0, 0]
[ 0.838651] bus: 01 index 2 mmio: [0, 0]
[ 0.838689] bus: 01 index 3 mmio: [0, 0]
[ 0.838727] bus: 02 index 0 io port: [2000, 2fff]
[ 0.838766] bus: 02 index 1 mmio: [d0300000, d03fffff]
[ 0.838806] bus: 02 index 2 mmio: [c0000000, cfffffff]
[ 0.838845] bus: 02 index 3 mmio: [0, 0]
[ 0.838883] bus: 03 index 0 mmio: [0, 0]
[ 0.838921] bus: 03 index 1 mmio: [d0000000, d02fffff]
[ 0.838960] bus: 03 index 2 mmio: [d0600000, d06fffff]
[ 0.839000] bus: 03 index 3 mmio: [0, 0]
[ 0.839038] bus: 04 index 0 mmio: [0, 0]
[ 0.839076] bus: 04 index 1 mmio: [d0000000, d01fffff]
[ 0.839115] bus: 04 index 2 mmio: [d0600000, d06fffff]
[ 0.839154] bus: 04 index 3 mmio: [0, 0]
[ 0.839191] bus: 05 index 0 mmio: [0, 0]
[ 0.839229] bus: 05 index 1 mmio: [d0000000, d01fffff]
[ 0.839268] bus: 05 index 2 mmio: [d0600000, d06fffff]
[ 0.839307] bus: 05 index 3 mmio: [0, 0]
[ 0.839345] bus: 06 index 0 mmio: [0, 0]
[ 0.839382] bus: 06 index 1 mmio: [0, 0]
[ 0.839420] bus: 06 index 2 mmio: [0, 0]
[ 0.839457] bus: 06 index 3 mmio: [0, 0]
[ 0.839495] bus: 07 index 0 io port: [3000, 3fff]
[ 0.839534] bus: 07 index 1 mmio: [d0400000, d04fffff]
[ 0.839573] bus: 07 index 2 mmio: [d0700000, d07fffff]
[ 0.839613] bus: 07 index 3 mmio: [0, 0]
[ 0.839651] bus: 08 index 0 mmio: [0, 0]
[ 0.839689] bus: 08 index 1 mmio: [d0500000, d05fffff]
[ 0.839728] bus: 08 index 2 mmio: [0, 0]
[ 0.839766] bus: 08 index 3 io port: [0, ffff]
[ 0.839804] bus: 08 index 4 mmio: [0, ffffffffffffffff]
[ 0.839851] NET: Registered protocol family 2
[ 0.852047] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.852289] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.852704] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.852927] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.852969] TCP reno registered
[ 0.856085] NET: Registered protocol family 1
[ 0.856344] Simple Boot Flag at 0x41 set to 0x1
[ 0.859236] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[ 0.860141] audit: initializing netlink socket (disabled)
[ 0.860201] type=2000 audit(1227488648.860:1): initialized
[ 0.869158] highmem bounce pool size: 64 pages
[ 0.869201] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.872477] VFS: Disk quotas dquot_6.5.1
[ 0.872541] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.872866] DLM (built Nov 24 2008 00:58:02) installed
[ 0.874150] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.874768] fuse init (API version 7.9)
[ 0.875071] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 0.876368] SGI XFS Quota Management subsystem
[ 0.876414] msgmni has been set to 1717
[ 0.876676] io scheduler noop registered
[ 0.876715] io scheduler anticipatory registered
[ 0.876754] io scheduler deadline registered
[ 0.876808] io scheduler cfq registered (default)
[ 0.876966] pci 0000:02:00.0: Boot video device
[ 0.877120] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.877150] pcieport-driver 0000:00:01.0: found MSI capability
[ 0.877214] pci_express 0000:00:01.0:pcie00: allocate port service
[ 0.877272] pci_express 0000:00:01.0:pcie01: allocate port service
[ 0.877362] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 0.877390] pcieport-driver 0000:00:05.0: found MSI capability
[ 0.877450] pci_express 0000:00:05.0:pcie00: allocate port service
[ 0.877501] pci_express 0000:00:05.0:pcie01: allocate port service
[ 0.877592] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.877620] pcieport-driver 0000:00:09.0: found MSI capability
[ 0.877680] pci_express 0000:00:09.0:pcie00: allocate port service
[ 0.877741] pci_express 0000:00:09.0:pcie01: allocate port service
[ 0.877840] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.877871] pcieport-driver 0000:00:1c.0: found MSI capability
[ 0.877940] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 0.877991] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 0.878041] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 0.878142] pcieport-driver 0000:03:00.0: setting latency timer to 64
[ 0.878172] pci_express 0000:03:00.0:pcie11: allocate port service
[ 0.878275] pcieport-driver 0000:04:00.0: setting latency timer to 64
[ 0.878303] pcieport-driver 0000:04:00.0: found MSI capability
[ 0.878373] pci_express 0000:04:00.0:pcie21: allocate port service
[ 0.879793] aer 0000:00:01.0:pcie01: AER service couldn't init device: no _OSC support
[ 0.881014] aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support
[ 0.882246] aer 0000:00:09.0:pcie01: AER service couldn't init device: no _OSC support
[ 0.882561] uvesafb: failed to execute /sbin/v86d
[ 0.882600] uvesafb: make sure that the v86d helper is installed and executable
[ 0.882648] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[ 0.882689] uvesafb: vbe_init() failed with -22
[ 0.882730] uvesafb: probe of uvesafb.0 failed with error -22
[ 0.882872] vga16fb: initializing
[ 0.882878] vga16fb: mapped to 0xc00a0000
[ 0.882983] fb0: VGA16 VGA frame buffer device
[ 0.883212] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.883261] ACPI: Power Button (FF) [PWRF]
[ 0.883403] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input1
[ 0.883454] ACPI: Power Button (CM) [PWRB]
[ 0.884658] processor ACPI0007:00: registered as cooling_device0
[ 0.884702] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.885719] processor ACPI0007:01: registered as cooling_device1
[ 0.885767] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.886812] processor ACPI0007:02: registered as cooling_device2
[ 0.886858] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 0.887858] processor ACPI0007:03: registered as cooling_device3
[ 0.887902] ACPI: Processor [CPU3] (supports 8 throttling states)
[ 0.888920] processor ACPI0007:04: registered as cooling_device4
[ 0.888968] ACPI: Processor [CPU4] (supports 8 throttling states)
[ 0.890025] processor ACPI0007:05: registered as cooling_device5
[ 0.890070] ACPI: Processor [CPU5] (supports 8 throttling states)
[ 0.891070] processor ACPI0007:06: registered as cooling_device6
[ 0.891115] ACPI: Processor [CPU6] (supports 8 throttling states)
[ 0.892116] processor ACPI0007:07: registered as cooling_device7
[ 0.892160] ACPI: Processor [CPU7] (supports 8 throttling states)
[ 0.944166] lp: driver loaded but no devices found
[ 0.944390] hpet_resources: 0xfed00000 is busy
[ 0.944524] Non-volatile memory driver v1.2
[ 0.944932] intel_rng: FWH not detected
[ 0.945039] Linux agpgart interface v0.103
[ 0.945269] [drm] Initialized drm 1.1.0 20060810
[ 0.946180] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 0.946343] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.946521] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.947185] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.947493] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.948011] parport_pc 00:0d: reported by Plug and Play ACPI
[ 0.948151] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 1.044125] lp0: using parport0 (interrupt-driven).
[ 1.044669] Floppy drive(s): fd0 is 1.44M
[ 1.063669] FDC 0 is a post-1991 82077
[ 1.066562] brd: module loaded
[ 1.067510] loop: module loaded
[ 1.067661] Intel(R) Gigabit Ethernet Network Driver - version 1.2.45-k2
[ 1.067702] Copyright (c) 2008 Intel Corporation.
[ 1.067769] igb 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.067816] igb 0000:07:00.0: setting latency timer to 64
[ 1.182765] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 1.182808] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:c3:5d:8c
[ 1.182928] igb 0000:07:00.0: eth0: PBA No: ffffff-0ff
[ 1.182968] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 1.183029] igb 0000:07:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.183074] igb 0000:07:00.1: setting latency timer to 64
[ 1.282765] igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 1.282808] igb 0000:07:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:c3:5d:8d
[ 1.282928] igb 0000:07:00.1: eth1: PBA No: ffffff-0ff
[ 1.282967] igb 0000:07:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 1.283461] Adaptec aacraid driver 1.1-5[2456]-ms
[ 1.283527] aacraid 0000:05:00.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
[ 1.283571] aacraid 0000:05:00.0: setting latency timer to 64
[ 1.544199] AAC0: kernel 5.2-0[15748] Jun 2 2008
[ 1.544239] AAC0: monitor 5.2-0[15748]
[ 1.544276] AAC0: bios 5.2-0[15748]
[ 1.544314] AAC0: serial 42B200
[ 1.544351] AAC0: Non-DASD support enabled.
[ 1.551438] scsi0 : aacraid
[ 1.551824] scsi 0:0:0:0: Direct-Access SMC System V1.0 PQ: 0 ANSI: 2
[ 1.552204] scsi 0:0:1:0: Direct-Access SMC Data V1.0 PQ: 0 ANSI: 2
[ 1.561200] scsi 0:1:0:0: Direct-Access FUJITSU MBA3073RC 0103 PQ: 0 ANSI: 5
[ 1.563446] scsi 0:1:1:0: Direct-Access FUJITSU MBA3073RC 0103 PQ: 0 ANSI: 5
[ 1.565199] scsi 0:1:4:0: Direct-Access ST3500320AS SD15 PQ: 0 ANSI: 5
[ 1.566662] scsi 0:1:5:0: Direct-Access ST3500320AS SD15 PQ: 0 ANSI: 5
[ 1.568136] scsi 0:1:6:0: Direct-Access ST3500320AS SD15 PQ: 0 ANSI: 5
[ 1.569656] scsi 0:1:7:0: Direct-Access ST3500320AS SD15 PQ: 0 ANSI: 5
[ 1.617747] Driver 'sd' needs updating - please use bus_type methods
[ 1.617896] sd 0:0:0:0: [sda] 286699520 512-byte hardware sectors (146790 MB)
[ 1.617952] sd 0:0:0:0: [sda] Write Protect is off
[ 1.617992] sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00
[ 1.618022] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.618148] sd 0:0:0:0: [sda] 286699520 512-byte hardware sectors (146790 MB)
[ 1.618202] sd 0:0:0:0: [sda] Write Protect is off
[ 1.618242] sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00
[ 1.618269] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.618319] sda: sda1 sda2 sda3
[ 1.618911] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 1.619055] sd 0:0:1:0: [sdb] 2925506560 512-byte hardware sectors (1497859 MB)
[ 1.619118] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.619157] sd 0:0:1:0: [sdb] Mode Sense: 06 00 10 00
[ 1.619189] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.619314] sd 0:0:1:0: [sdb] 2925506560 512-byte hardware sectors (1497859 MB)
[ 1.619374] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.619414] sd 0:0:1:0: [sdb] Mode Sense: 06 00 10 00
[ 1.619441] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.619491] sdb: sdb1
[ 1.620233] sd 0:0:1:0: [sdb] Attached SCSI removable disk
[ 1.620490] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.620605] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 1.620716] scsi 0:1:0:0: Attached scsi generic sg2 type 0
[ 1.620826] scsi 0:1:1:0: Attached scsi generic sg3 type 0
[ 1.620938] scsi 0:1:4:0: Attached scsi generic sg4 type 0
[ 1.621058] scsi 0:1:5:0: Attached scsi generic sg5 type 0
[ 1.621164] scsi 0:1:6:0: Attached scsi generic sg6 type 0
[ 1.621269] scsi 0:1:7:0: Attached scsi generic sg7 type 0
[ 1.621576] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.621631] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.621635] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.621814] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.625773] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.625816] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.625828] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0808000
[ 1.640009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.640179] usb usb1: configuration #1 chosen from 1 choice
[ 1.640286] hub 1-0:1.0: USB hub found
[ 1.640330] hub 1-0:1.0: 8 ports detected
[ 1.848289] USB Universal Host Controller Interface driver v3.0
[ 1.848360] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.848407] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.848410] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.848571] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.848642] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
[ 1.848799] usb usb2: configuration #1 chosen from 1 choice
[ 1.848898] hub 2-0:1.0: USB hub found
[ 1.848941] hub 2-0:1.0: 2 ports detected
[ 1.952202] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.952247] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.952250] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.952415] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.952486] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820
[ 1.952642] usb usb3: configuration #1 chosen from 1 choice
[ 1.952744] hub 3-0:1.0: USB hub found
[ 1.952785] hub 3-0:1.0: 2 ports detected
[ 1.960013] usb 1-7: new high speed USB device using ehci_hcd and address 2
[ 2.056210] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.056256] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.056259] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.056426] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.056497] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
[ 2.056647] usb usb4: configuration #1 chosen from 1 choice
[ 2.056750] hub 4-0:1.0: USB hub found
[ 2.056792] hub 4-0:1.0: 2 ports detected
[ 2.094827] usb 1-7: configuration #1 chosen from 1 choice
[ 2.160219] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.160265] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.160268] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.160437] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.160504] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860
[ 2.160666] usb usb5: configuration #1 chosen from 1 choice
[ 2.160770] hub 5-0:1.0: USB hub found
[ 2.160812] hub 5-0:1.0: 2 ports detected
[ 2.368250] Initializing USB Mass Storage driver...
[ 2.368375] scsi1 : SCSI emulation for USB Mass Storage devices
[ 2.368567] usb-storage: device found at 2
[ 2.368569] usb-storage: waiting for device to settle before scanning
[ 2.368629] scsi2 : SCSI emulation for USB Mass Storage devices
[ 2.368818] usb-storage: device found at 2
[ 2.368820] usb-storage: waiting for device to settle before scanning
[ 2.368880] usbcore: registered new interface driver usb-storage
[ 2.368922] USB Mass Storage support registered.
[ 2.369103] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 2.371551] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.371595] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.371810] mice: PS/2 mouse device common for all mice
[ 2.397009] evbug.c: Connected device: input0 (Power Button (FF) at LNXPWRBN/button/input0)
[ 2.401008] evbug.c: Connected device: input1 (Power Button (CM) at PNP0C0C/button/input0)
[ 2.423941] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.429115] evbug.c: Connected device: input2 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[ 2.432937] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.432997] rtc0: alarms up to one month, y3k, hpet irqs
[ 2.433349] cpuidle: using governor ladder
[ 2.433388] cpuidle: using governor menu
[ 2.433441] ioatdma 0000:00:0f.0: PCI INT A -> GSI 57 (level, low) -> IRQ 57
[ 2.433492] ioatdma 0000:00:0f.0: setting latency timer to 64
[ 2.433499] ioatdma 0000:00:0f.0: Intel(R) I/OAT DMA Engine found, 4 channels, device version 0x20, driver version 3.30
[ 2.433677] ioatdma: ioat_dma_test_callback(00008086)
[ 2.539843] igb 0000:07:00.0: DCA enabled
[ 2.539943] igb 0000:07:00.1: DCA enabled
[ 2.540167] usbcore: registered new interface driver hiddev
[ 2.541896] input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.2/input/input3
[ 2.552215] evbug.c: Connected device: input3 (Peppercon AG Multidevice at usb-0000:00:1d.7-7/input2)
[ 2.552283] input,hidraw0: USB HID v1.01 Mouse [Peppercon AG Multidevice] on usb-0000:00:1d.7-7
[ 2.553681] input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.3/input/input4
[ 2.568340] evbug.c: Connected device: input4 (Peppercon AG Multidevice at usb-0000:00:1d.7-7/input3)
[ 2.568415] input,hidraw1: USB HID v1.01 Keyboard [Peppercon AG Multidevice] on usb-0000:00:1d.7-7
[ 2.568626] usbcore: registered new interface driver usbhid
[ 2.568667] usbhid: v2.6:USB HID core driver
[ 2.568770] Advanced Linux Sound Architecture Driver Version 1.0.17.
[ 2.569376] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.569436] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 2.589938] logips2pp: Detected unknown logitech mouse model 57
[ 2.601918] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 2.635368] HDA Intel 0000:02:00.1: PCI INT B -> GSI 60 (level, low) -> IRQ 60
[ 2.635430] HDA Intel 0000:02:00.1: setting latency timer to 64
[ 2.680493] ALSA device list:
[ 2.680531] #0: HDA Intel at 0xd0804000 irq 20
[ 2.680570] #1: HDA ATI HDMI at 0xd0310000 irq 60
[ 2.681114] TCP bic registered
[ 2.681152] TCP cubic registered
[ 2.681189] TCP westwood registered
[ 2.681226] TCP highspeed registered
[ 2.681264] TCP hybla registered
[ 2.681300] TCP htcp registered
[ 2.681337] TCP vegas registered
[ 2.681374] TCP veno registered
[ 2.681411] TCP scalable registered
[ 2.681448] TCP lp registered
[ 2.681485] TCP yeah registered
[ 2.681527] TCP illinois registered
[ 2.681566] NET: Registered protocol family 17
[ 2.681612] NET: Registered protocol family 15
[ 2.682051] RPC: Registered udp transport module.
[ 2.682091] RPC: Registered tcp transport module.
[ 2.682581] SCTP: Hash tables configured (established 65536 bind 65536)
[ 2.689568] Starting balanced_irq
[ 2.689655] Using IPI No-Shortcut mode
[ 2.689923] registered taskstats version 1
[ 2.690134] Magic number: 0:450:54
[ 2.690295] rtc_cmos 00:05: setting system clock to 2008-11-24 01:04:12 UTC (1227488652)
[ 2.690345] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.690386] EDD information not available.
[ 3.053310] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 3.064006] evbug.c: Connected device: input5 (ImExPS/2 Logitech Explorer Mouse at isa0060/serio1/input0)
[ 3.108044] kjournald starting. Commit interval 5 seconds
[ 3.108052] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.108064] VFS: Mounted root (ext3 filesystem) readonly.
[ 3.108180] Freeing unused kernel memory: 356k freed
[ 3.108273] Write protecting the kernel text: 5720k
[ 3.108335] Write protecting the kernel read-only data: 1800k
[ 5.807015] EXT3 FS on sda1, internal journal
[ 6.195602] XFS mounting filesystem sdb1
[ 6.332896] Ending clean XFS mount for filesystem: sdb1
[ 6.346537] kjournald starting. Commit interval 5 seconds
[ 6.346615] EXT3 FS on sda3, internal journal
[ 6.346620] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.155616] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 7.370342] scsi 2:0:0:0: CD-ROM PepperC Virtual Disc 2 0.01 PQ: 0 ANSI: 3
[ 7.370456] scsi 1:0:0:0: CD-ROM PepperC Virtual Disc 1 0.01 PQ: 0 ANSI: 3
[ 7.370652] scsi 1:0:0:0: Attached scsi generic sg8 type 5
[ 7.371842] scsi 2:0:0:0: Attached scsi generic sg9 type 5
[ 7.372367] usb-storage: device scan complete
[ 7.374076] usb-storage: device scan complete
[ 9.005660] pci 0000:02:00.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
[ 9.234463] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[-- Attachment #4: Type: text/plain, Size: 121 bytes --]
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply [flat|nested] 14+ messages in thread