From: Dave Chinner <david@fromorbit.com>
To: xfs@oss.sgi.com
Subject: [PATCH 03/12] xfs: rework log grant space calculations
Date: Mon, 13 Dec 2010 15:44:34 +1100 [thread overview]
Message-ID: <1292215483-18224-4-git-send-email-david@fromorbit.com> (raw)
In-Reply-To: <1292215483-18224-1-git-send-email-david@fromorbit.com>
From: Dave Chinner <dchinner@redhat.com>
The log grant space calculations are repeated for both write and
reserve grant heads. To make it simpler to convert the calculations
toa different algorithm, factor them so both the gratn heads use the
same calculation functions. Once this is done we can drop the
wrappers that are used in only a couple of place to update both
grant heads at once as they don't provide any particular value.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
---
fs/xfs/xfs_log.c | 95 +++++++++++++++++++++++++++--------------------------
1 files changed, 48 insertions(+), 47 deletions(-)
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 99c6285..9a4b9ed 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -98,53 +98,34 @@ STATIC void xlog_verify_tail_lsn(xlog_t *log, xlog_in_core_t *iclog,
STATIC int xlog_iclogs_empty(xlog_t *log);
static void
-xlog_grant_sub_space(struct log *log, int bytes)
-{
- log->l_grant_write_bytes -= bytes;
- if (log->l_grant_write_bytes < 0) {
- log->l_grant_write_bytes += log->l_logsize;
- log->l_grant_write_cycle--;
- }
-
- log->l_grant_reserve_bytes -= bytes;
- if ((log)->l_grant_reserve_bytes < 0) {
- log->l_grant_reserve_bytes += log->l_logsize;
- log->l_grant_reserve_cycle--;
- }
-
-}
-
-static void
-xlog_grant_add_space_write(struct log *log, int bytes)
+xlog_grant_sub_space(
+ struct log *log,
+ int *cycle,
+ int *space,
+ int bytes)
{
- int tmp = log->l_logsize - log->l_grant_write_bytes;
- if (tmp > bytes)
- log->l_grant_write_bytes += bytes;
- else {
- log->l_grant_write_cycle++;
- log->l_grant_write_bytes = bytes - tmp;
+ *space -= bytes;
+ if (*space < 0) {
+ *space += log->l_logsize;
+ (*cycle)--;
}
}
static void
-xlog_grant_add_space_reserve(struct log *log, int bytes)
+xlog_grant_add_space(
+ struct log *log,
+ int *cycle,
+ int *space,
+ int bytes)
{
- int tmp = log->l_logsize - log->l_grant_reserve_bytes;
+ int tmp = log->l_logsize - *space;
if (tmp > bytes)
- log->l_grant_reserve_bytes += bytes;
+ *space += bytes;
else {
- log->l_grant_reserve_cycle++;
- log->l_grant_reserve_bytes = bytes - tmp;
+ *space = bytes - tmp;
+ (*cycle)++;
}
}
-
-static inline void
-xlog_grant_add_space(struct log *log, int bytes)
-{
- xlog_grant_add_space_write(log, bytes);
- xlog_grant_add_space_reserve(log, bytes);
-}
-
static void
xlog_tic_reset_res(xlog_ticket_t *tic)
{
@@ -1344,7 +1325,10 @@ xlog_sync(xlog_t *log,
/* move grant heads by roundoff in sync */
spin_lock(&log->l_grant_lock);
- xlog_grant_add_space(log, roundoff);
+ xlog_grant_add_space(log, &log->l_grant_reserve_cycle,
+ &log->l_grant_reserve_bytes, roundoff);
+ xlog_grant_add_space(log, &log->l_grant_write_cycle,
+ &log->l_grant_write_bytes, roundoff);
spin_unlock(&log->l_grant_lock);
/* put cycle number in every block */
@@ -2574,7 +2558,10 @@ redo:
list_del_init(&tic->t_queue);
/* we've got enough space */
- xlog_grant_add_space(log, need_bytes);
+ xlog_grant_add_space(log, &log->l_grant_reserve_cycle,
+ &log->l_grant_reserve_bytes, need_bytes);
+ xlog_grant_add_space(log, &log->l_grant_write_cycle,
+ &log->l_grant_write_bytes, need_bytes);
trace_xfs_log_grant_exit(log, tic);
xlog_verify_grant_head(log, 1);
xlog_verify_grant_tail(log);
@@ -2701,7 +2688,8 @@ redo:
list_del_init(&tic->t_queue);
/* we've got enough space */
- xlog_grant_add_space_write(log, need_bytes);
+ xlog_grant_add_space(log, &log->l_grant_write_cycle,
+ &log->l_grant_write_bytes, need_bytes);
trace_xfs_log_regrant_write_exit(log, tic);
xlog_verify_grant_head(log, 1);
xlog_verify_grant_tail(log);
@@ -2742,7 +2730,12 @@ xlog_regrant_reserve_log_space(xlog_t *log,
ticket->t_cnt--;
spin_lock(&log->l_grant_lock);
- xlog_grant_sub_space(log, ticket->t_curr_res);
+ xlog_grant_sub_space(log, &log->l_grant_reserve_cycle,
+ &log->l_grant_reserve_bytes,
+ ticket->t_curr_res);
+ xlog_grant_sub_space(log, &log->l_grant_write_cycle,
+ &log->l_grant_write_bytes,
+ ticket->t_curr_res);
ticket->t_curr_res = ticket->t_unit_res;
xlog_tic_reset_res(ticket);
@@ -2756,7 +2749,9 @@ xlog_regrant_reserve_log_space(xlog_t *log,
return;
}
- xlog_grant_add_space_reserve(log, ticket->t_unit_res);
+ xlog_grant_add_space(log, &log->l_grant_reserve_cycle,
+ &log->l_grant_reserve_bytes,
+ ticket->t_unit_res);
trace_xfs_log_regrant_reserve_exit(log, ticket);
@@ -2785,24 +2780,30 @@ STATIC void
xlog_ungrant_log_space(xlog_t *log,
xlog_ticket_t *ticket)
{
+ int bytes;
+
if (ticket->t_cnt > 0)
ticket->t_cnt--;
spin_lock(&log->l_grant_lock);
trace_xfs_log_ungrant_enter(log, ticket);
-
- xlog_grant_sub_space(log, ticket->t_curr_res);
-
trace_xfs_log_ungrant_sub(log, ticket);
- /* If this is a permanent reservation ticket, we may be able to free
+ /*
+ * If this is a permanent reservation ticket, we may be able to free
* up more space based on the remaining count.
*/
+ bytes = ticket->t_curr_res;
if (ticket->t_cnt > 0) {
ASSERT(ticket->t_flags & XLOG_TIC_PERM_RESERV);
- xlog_grant_sub_space(log, ticket->t_unit_res*ticket->t_cnt);
+ bytes += ticket->t_unit_res*ticket->t_cnt;
}
+ xlog_grant_sub_space(log, &log->l_grant_reserve_cycle,
+ &log->l_grant_reserve_bytes, bytes);
+ xlog_grant_sub_space(log, &log->l_grant_write_cycle,
+ &log->l_grant_write_bytes, bytes);
+
trace_xfs_log_ungrant_exit(log, ticket);
xlog_verify_grant_head(log, 1);
--
1.7.2.3
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2010-12-13 4:55 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-13 4:44 xfs: grant lock scaling and removal V3 Dave Chinner
2010-12-13 4:44 ` [PATCH 01/12] xfs: convert log grant ticket queues to list heads Dave Chinner
2010-12-20 11:34 ` Christoph Hellwig
2010-12-21 0:55 ` Dave Chinner
2010-12-13 4:44 ` [PATCH 02/12] xfs: fact out common grant head/log tail verification code Dave Chinner
2010-12-20 11:51 ` Christoph Hellwig
2010-12-13 4:44 ` Dave Chinner [this message]
2010-12-20 11:37 ` [PATCH 03/12] xfs: rework log grant space calculations Christoph Hellwig
2010-12-13 4:44 ` [PATCH 04/12] xfs: combine grant heads into a single 64 bit integer Dave Chinner
2010-12-20 11:40 ` Christoph Hellwig
2010-12-13 4:44 ` [PATCH 05/12] xfs: use wait queues directly for the log wait queues Dave Chinner
2010-12-20 11:40 ` Christoph Hellwig
2010-12-13 4:44 ` [PATCH 06/12] xfs: make AIL tail pushing independent of the grant lock Dave Chinner
2010-12-20 11:41 ` Christoph Hellwig
2010-12-13 4:44 ` [PATCH 07/12] xfs: convert l_last_sync_lsn to an atomic variable Dave Chinner
2010-12-13 4:44 ` [PATCH 08/12] xfs: convert l_tail_lsn " Dave Chinner
2010-12-20 12:06 ` Christoph Hellwig
2010-12-21 1:27 ` Dave Chinner
2010-12-13 4:44 ` [PATCH 09/12] xfs: convert log grant heads to atomic variables Dave Chinner
2010-12-13 4:44 ` [PATCH 10/12] xfs: introduce new locks for the log grant ticket wait queues Dave Chinner
2010-12-20 11:49 ` Christoph Hellwig
2010-12-13 4:44 ` [PATCH 11/12] xfs: convert grant head manipulations to lockless algorithm Dave Chinner
2010-12-20 11:50 ` Christoph Hellwig
2010-12-13 4:44 ` [PATCH 12/12] xfs: kill useless spinlock_destroy macro Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1292215483-18224-4-git-send-email-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox