From: Dave Chinner <david@fromorbit.com>
To: xfs@oss.sgi.com
Subject: [PATCH 6/8] xfs: split buffered IO write path from xfs_file_aio_write
Date: Fri, 7 Jan 2011 22:30:23 +1100 [thread overview]
Message-ID: <1294399825-1157-7-git-send-email-david@fromorbit.com> (raw)
In-Reply-To: <1294399825-1157-1-git-send-email-david@fromorbit.com>
From: Dave Chinner <dchinner@redhat.com>
Complete the split of the different write IO paths by splitting the
buffered IO write path out of xfs_file_aio_write(). This makes the
different mechanisms of the write patchs easier to follow.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
---
fs/xfs/linux-2.6/xfs_file.c | 146 ++++++++++++++++++++-----------------------
1 files changed, 69 insertions(+), 77 deletions(-)
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 2d55648..9ce5e12 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -730,58 +730,31 @@ xfs_file_dio_aio_write(
}
STATIC ssize_t
-xfs_file_aio_write(
+xfs_file_buffered_aio_write(
struct kiocb *iocb,
const struct iovec *iovp,
unsigned long nr_segs,
- loff_t pos)
+ loff_t pos,
+ size_t ocount,
+ int *iolock)
{
struct file *file = iocb->ki_filp;
struct address_space *mapping = file->f_mapping;
struct inode *inode = mapping->host;
struct xfs_inode *ip = XFS_I(inode);
- struct xfs_mount *mp = ip->i_mount;
- ssize_t ret = 0;
- int ioflags = 0;
+ ssize_t ret;
+ int enospc = 0;
xfs_fsize_t new_size;
- int iolock;
- size_t ocount = 0, count;
-
- XFS_STATS_INC(xs_write_calls);
-
- BUG_ON(iocb->ki_pos != pos);
-
- if (unlikely(file->f_flags & O_DIRECT))
- ioflags |= IO_ISDIRECT;
- if (file->f_mode & FMODE_NOCMTIME)
- ioflags |= IO_INVIS;
-
- ret = generic_segment_checks(iovp, &nr_segs, &ocount, VERIFY_READ);
- if (ret)
- return ret;
-
- count = ocount;
- if (count == 0)
- return 0;
-
- xfs_wait_for_freeze(mp, SB_FREEZE_WRITE);
-
- if (XFS_FORCED_SHUTDOWN(mp))
- return -EIO;
+ size_t count = ocount;
-relock:
- if (ioflags & IO_ISDIRECT) {
- ret = xfs_file_dio_aio_write(iocb, iovp, nr_segs, pos,
- ocount, &iolock);
- goto done_io;
- }
- iolock = XFS_IOLOCK_EXCL;
+ *iolock = XFS_IOLOCK_EXCL;
+ xfs_rw_ilock(ip, XFS_ILOCK_EXCL|*iolock);
- xfs_rw_ilock(ip, XFS_ILOCK_EXCL|iolock);
ret = generic_write_checks(file, &pos, &count,
S_ISBLK(inode->i_mode));
if (ret) {
- xfs_rw_iunlock(ip, XFS_ILOCK_EXCL|iolock);
+ xfs_rw_iunlock(ip, XFS_ILOCK_EXCL|*iolock);
+ *iolock = 0;
return ret;
}
@@ -789,67 +762,86 @@ relock:
if (new_size > ip->i_size)
ip->i_new_size = new_size;
- if (likely(!(ioflags & IO_INVIS)))
+ if (likely(!(file->f_mode & FMODE_NOCMTIME)))
file_update_time(file);
- /*
- * If the offset is beyond the size of the file, we have a couple
- * of things to do. First, if there is already space allocated
- * we need to either create holes or zero the disk or ...
- *
- * If there is a page where the previous size lands, we need
- * to zero it out up to the new size.
- */
-
if (pos > ip->i_size) {
ret = -xfs_zero_eof(ip, pos, ip->i_size);
if (ret) {
xfs_rw_iunlock(ip, XFS_ILOCK_EXCL);
- goto out_unlock_internal;
+ return ret;
}
}
xfs_rw_iunlock(ip, XFS_ILOCK_EXCL);
- /*
- * If we're writing the file then make sure to clear the
- * setuid and setgid bits if the process is not being run
- * by root. This keeps people from modifying setuid and
- * setgid binaries.
- */
ret = file_remove_suid(file);
if (unlikely(ret))
- goto out_unlock_internal;
+ return ret;
/* We can write back this queue in page reclaim */
current->backing_dev_info = mapping->backing_dev_info;
- if (!(ioflags & IO_ISDIRECT)) {
- int enospc = 0;
-
write_retry:
- trace_xfs_file_buffered_write(ip, count, iocb->ki_pos, ioflags);
- ret = generic_file_buffered_write(iocb, iovp, nr_segs,
- pos, &iocb->ki_pos, count, ret);
- /*
- * if we just got an ENOSPC, flush the inode now we
- * aren't holding any page locks and retry *once*
- */
- if (ret == -ENOSPC && !enospc) {
- ret = xfs_flush_pages(ip, 0, -1, 0, FI_NONE);
- if (ret)
- goto out_unlock_internal;
- enospc = 1;
- goto write_retry;
- }
+ trace_xfs_file_buffered_write(ip, count, iocb->ki_pos, 0);
+ ret = generic_file_buffered_write(iocb, iovp, nr_segs,
+ pos, &iocb->ki_pos, count, ret);
+ /*
+ * if we just got an ENOSPC, flush the inode now we aren't holding any
+ * page locks and retry *once*
+ */
+ if (ret == -ENOSPC && !enospc) {
+ ret = -xfs_flush_pages(ip, 0, -1, 0, FI_NONE);
+ if (ret)
+ return ret;
+ enospc = 1;
+ goto write_retry;
}
-
current->backing_dev_info = NULL;
+ return ret;
+}
+
+STATIC ssize_t
+xfs_file_aio_write(
+ struct kiocb *iocb,
+ const struct iovec *iovp,
+ unsigned long nr_segs,
+ loff_t pos)
+{
+ struct file *file = iocb->ki_filp;
+ struct address_space *mapping = file->f_mapping;
+ struct inode *inode = mapping->host;
+ struct xfs_inode *ip = XFS_I(inode);
+ ssize_t ret;
+ int iolock;
+ size_t ocount = 0;
+
+ XFS_STATS_INC(xs_write_calls);
+
+ BUG_ON(iocb->ki_pos != pos);
+
+ ret = generic_segment_checks(iovp, &nr_segs, &ocount, VERIFY_READ);
+ if (ret)
+ return ret;
+
+ if (ocount == 0)
+ return 0;
+
+ xfs_wait_for_freeze(ip->i_mount, SB_FREEZE_WRITE);
+
+ if (XFS_FORCED_SHUTDOWN(ip->i_mount))
+ return -EIO;
+
+ if (unlikely(file->f_flags & O_DIRECT))
+ ret = xfs_file_dio_aio_write(iocb, iovp, nr_segs, pos,
+ ocount, &iolock);
+ else
+ ret = xfs_file_buffered_aio_write(iocb, iovp, nr_segs, pos,
+ ocount, &iolock);
-done_io:
xfs_aio_write_isize_update(inode, &iocb->ki_pos, ret);
if (ret <= 0)
- goto out_unlock_internal;
+ goto out_unlock;
/* Handle various SYNC-type writes */
if ((file->f_flags & O_DSYNC) || IS_SYNC(inode)) {
@@ -868,7 +860,7 @@ done_io:
ret = error2;
}
- out_unlock_internal:
+out_unlock:
xfs_aio_write_newsize_update(ip);
xfs_rw_iunlock(ip, iolock);
return ret;
--
1.7.2.3
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2011-01-07 11:29 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-07 11:30 [PATCH 0/8] xfs: prevent corruption due to overlapping AIO DIO V3 Dave Chinner
2011-01-07 11:30 ` [PATCH 1/8] xfs: ensure sync write errors are returned Dave Chinner
2011-01-10 19:18 ` Christoph Hellwig
2011-01-07 11:30 ` [PATCH 2/8] xfs: factor common post-write isize handling code Dave Chinner
2011-01-10 19:19 ` Christoph Hellwig
2011-01-07 11:30 ` [PATCH 4/8] xfs: introduce xfs_rw_lock() helpers for locking the inode Dave Chinner
2011-01-10 19:23 ` Christoph Hellwig
2011-01-10 22:26 ` Dave Chinner
2011-01-07 11:30 ` [PATCH 5/8] xfs: split direct IO write path from xfs_file_aio_write Dave Chinner
2011-01-10 19:24 ` Christoph Hellwig
2011-01-07 11:30 ` Dave Chinner [this message]
2011-01-10 19:25 ` [PATCH 6/8] xfs: split buffered " Christoph Hellwig
2011-01-07 11:30 ` [PATCH 7/8] xfs: factor common write setup code Dave Chinner
2011-01-10 19:26 ` Christoph Hellwig
2011-01-07 11:30 ` [PATCH 8/8] xfs: serialise unaligned direct IOs Dave Chinner
2011-01-10 19:26 ` Christoph Hellwig
-- strict thread matches above, loose matches on Subject: below --
2011-01-10 23:37 [PATCH 0/8] xfs: prevent corruption due to overlapping AIO DIO V4 Dave Chinner
2011-01-10 23:37 ` [PATCH 6/8] xfs: split buffered IO write path from xfs_file_aio_write Dave Chinner
2011-01-04 4:48 [PATCH 0/8] xfs: prevent corruption due to overlapping AIO DIO V2 Dave Chinner
2011-01-04 4:48 ` [PATCH 6/8] xfs: split buffered IO write path from xfs_file_aio_write Dave Chinner
2011-01-05 1:55 ` Alex Elder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1294399825-1157-7-git-send-email-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox