From: Jan Kara <jack@suse.cz>
To: linux-fsdevel@vger.kernel.org
Cc: Jan Kara <jack@suse.cz>, Surbhi Palande <csurbhi@gmail.com>,
Kamal Mostafa <kamal@canonical.com>,
Eric Sandeen <sandeen@sandeen.net>,
LKML <linux-kernel@vger.kernel.org>,
xfs@oss.sgi.com, Christoph Hellwig <hch@infradead.org>,
Dave Chinner <dchinner@redhat.com>,
linux-ext4@vger.kernel.org
Subject: [PATCH 2/8] vfs: Protect write paths by sb_start_write - sb_end_write
Date: Fri, 20 Jan 2012 21:34:40 +0100 [thread overview]
Message-ID: <1327091686-23177-3-git-send-email-jack@suse.cz> (raw)
In-Reply-To: <1327091686-23177-1-git-send-email-jack@suse.cz>
There are three entry points which dirty pages in a filesystem. mmap (handled
by block_page_mkwrite()), buffered write (handled by
__generic_file_aio_write()), and truncate (it can dirty last partial page -
handled inside each filesystem separately). Protect these places with
sb_start_write() and sb_end_write().
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
---
fs/buffer.c | 22 ++++------------------
mm/filemap.c | 3 ++-
2 files changed, 6 insertions(+), 19 deletions(-)
diff --git a/fs/buffer.c b/fs/buffer.c
index 19d8eb7..550714d 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -2338,8 +2338,8 @@ EXPORT_SYMBOL(block_commit_write);
* beyond EOF, then the page is guaranteed safe against truncation until we
* unlock the page.
*
- * Direct callers of this function should call vfs_check_frozen() so that page
- * fault does not busyloop until the fs is thawed.
+ * Direct callers of this function should protect against filesystem freezing
+ * using sb_start_write() - sb_end_write() functions.
*/
int __block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf,
get_block_t get_block)
@@ -2371,18 +2371,7 @@ int __block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf,
if (unlikely(ret < 0))
goto out_unlock;
- /*
- * Freezing in progress? We check after the page is marked dirty and
- * with page lock held so if the test here fails, we are sure freezing
- * code will wait during syncing until the page fault is done - at that
- * point page will be dirty and unlocked so freezing code will write it
- * and writeprotect it again.
- */
set_page_dirty(page);
- if (inode->i_sb->s_frozen != SB_UNFROZEN) {
- ret = -EAGAIN;
- goto out_unlock;
- }
wait_on_page_writeback(page);
return 0;
out_unlock:
@@ -2397,12 +2386,9 @@ int block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf,
int ret;
struct super_block *sb = vma->vm_file->f_path.dentry->d_inode->i_sb;
- /*
- * This check is racy but catches the common case. The check in
- * __block_page_mkwrite() is reliable.
- */
- vfs_check_frozen(sb, SB_FREEZE_WRITE);
+ sb_start_write(sb, SB_FREEZE_WRITE);
ret = __block_page_mkwrite(vma, vmf, get_block);
+ sb_end_write(sb, SB_FREEZE_WRITE);
return block_page_mkwrite_return(ret);
}
EXPORT_SYMBOL(block_page_mkwrite);
diff --git a/mm/filemap.c b/mm/filemap.c
index c0018f2..471b9ae 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2529,7 +2529,7 @@ ssize_t __generic_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
count = ocount;
pos = *ppos;
- vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE);
+ sb_start_write(inode->i_sb, SB_FREEZE_WRITE);
/* We can write back this queue in page reclaim */
current->backing_dev_info = mapping->backing_dev_info;
@@ -2601,6 +2601,7 @@ ssize_t __generic_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
pos, ppos, count, written);
}
out:
+ sb_end_write(inode->i_sb, SB_FREEZE_WRITE);
current->backing_dev_info = NULL;
return written ? written : err;
}
--
1.7.1
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2012-01-20 20:35 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-20 20:34 [PATCH 0/8] Fix filesystem freezing Jan Kara
2012-01-20 20:34 ` [PATCH 1/8] fs: Improve filesystem freezing handling Jan Kara
2012-02-04 3:03 ` Eric Sandeen
2012-02-06 15:17 ` Jan Kara
2012-01-20 20:34 ` Jan Kara [this message]
2012-01-24 8:21 ` [PATCH 2/8] vfs: Protect write paths by sb_start_write - sb_end_write Dave Chinner
2012-01-24 11:44 ` Jan Kara
2012-02-05 6:13 ` Eric Sandeen
2012-02-06 15:33 ` Jan Kara
2012-01-20 20:34 ` [PATCH 3/8] ext4: Protect ext4_page_mkwrite & ext4_setattr with " Jan Kara
2012-01-20 20:34 ` [PATCH 4/8] xfs: Move ilock before transaction start in xfs_setattr_size() Jan Kara
2012-01-24 6:59 ` Dave Chinner
2012-01-24 11:52 ` Jan Kara
2012-01-20 20:34 ` [PATCH 5/8] xfs: Protect xfs_file_aio_write() & xfs_setattr_size() with sb_start_write - sb_end_write Jan Kara
2012-01-24 7:19 ` Dave Chinner
2012-01-24 19:35 ` Jan Kara
2012-02-04 4:30 ` Eric Sandeen
2012-02-04 4:50 ` Eric Sandeen
2012-02-05 23:11 ` Dave Chinner
2012-01-20 20:34 ` [PATCH 6/8] xfs: Use generic writers counter instead of m_active_trans counter Jan Kara
2012-01-24 8:05 ` Dave Chinner
2012-02-04 2:13 ` Eric Sandeen
2012-02-04 2:42 ` Eric Sandeen
2012-02-04 4:34 ` Eric Sandeen
2012-01-20 20:34 ` [PATCH 7/8] Documentation: Correct s_umount state for freeze_fs/unfreeze_fs Jan Kara
2012-01-20 20:34 ` [PATCH 8/8] vfs: Document s_frozen state through freeze_super Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1327091686-23177-3-git-send-email-jack@suse.cz \
--to=jack@suse.cz \
--cc=csurbhi@gmail.com \
--cc=dchinner@redhat.com \
--cc=hch@infradead.org \
--cc=kamal@canonical.com \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sandeen@sandeen.net \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox