From: Dave Chinner <david@fromorbit.com>
To: xfs@oss.sgi.com
Subject: [PATCH 09/13] xfs: move xfs_quiesce_attr() into xfs_super.c
Date: Thu, 30 Aug 2012 20:57:38 +1000 [thread overview]
Message-ID: <1346324262-32724-10-git-send-email-david@fromorbit.com> (raw)
In-Reply-To: <1346324262-32724-1-git-send-email-david@fromorbit.com>
From: Dave Chinner <dchinner@redhat.com>
Both callers of xfs_quiesce_attr() are in xfs_super.c, and there's
nothing really sync-specific about this functionality so it doesn't
really matter where it lives. Move it to benext to it's callers, so
all the remount/sync_fs code is in the one place.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
---
fs/xfs/xfs_super.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++++++++
fs/xfs/xfs_sync.c | 65 --------------------------------------------------
fs/xfs/xfs_sync.h | 3 ---
3 files changed, 67 insertions(+), 68 deletions(-)
diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index 2d053fb..7839817 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -1025,6 +1025,73 @@ xfs_restore_resvblks(struct xfs_mount *mp)
xfs_reserve_blocks(mp, &resblks, NULL);
}
+/*
+ * Trigger writeback of all the dirty metadata in the file system.
+ *
+ * This ensures that the metadata is written to their location on disk rather
+ * than just existing in transactions in the log. This means after a quiesce
+ * there is no log replay required to write the inodes to disk (this is the main
+ * difference between a sync and a quiesce).
+ *
+ * This shoul deffectively mimic the code in xfs_unmountfs() and
+ * xfs_log_umount() but without tearing down any structures.
+ * XXX: bug fixes needed!
+ *
+ * Note: this stops background log work - the callers must ensure it is started
+ * again when appropriate.
+ */
+void
+xfs_quiesce_attr(
+ struct xfs_mount *mp)
+{
+ int error = 0;
+
+ /* wait for all modifications to complete */
+ while (atomic_read(&mp->m_active_trans) > 0)
+ delay(100);
+
+ /* force the log to unpin objects from the now complete transactions */
+ xfs_log_force(mp, XFS_LOG_SYNC);
+
+ /* reclaim inodes to do any IO before the freeze completes */
+ xfs_reclaim_inodes(mp, 0);
+ xfs_reclaim_inodes(mp, SYNC_WAIT);
+
+ /* flush all pending changes from the AIL */
+ xfs_ail_push_all_sync(mp->m_ail);
+
+ /* stop background log work */
+ cancel_delayed_work_sync(&mp->m_log->l_work);
+
+ /*
+ * Just warn here till VFS can correctly support
+ * read-only remount without racing.
+ */
+ WARN_ON(atomic_read(&mp->m_active_trans) != 0);
+
+ /* Push the superblock and write an unmount record */
+ error = xfs_log_sbcount(mp);
+ if (error)
+ xfs_warn(mp, "xfs_attr_quiesce: failed to log sb changes. "
+ "Frozen image may not be consistent.");
+ xfs_log_unmount_write(mp);
+
+ /*
+ * At this point we might have modified the superblock again and thus
+ * added an item to the AIL, thus flush it again.
+ */
+ xfs_ail_push_all_sync(mp->m_ail);
+
+ /*
+ * The superblock buffer is uncached and xfsaild_push() will lock and
+ * set the XBF_ASYNC flag on the buffer. We cannot do xfs_buf_iowait()
+ * here but a lock on the superblock buffer will block until iodone()
+ * has completed.
+ */
+ xfs_buf_lock(mp->m_sb_bp);
+ xfs_buf_unlock(mp->m_sb_bp);
+}
+
STATIC int
xfs_fs_remount(
struct super_block *sb,
diff --git a/fs/xfs/xfs_sync.c b/fs/xfs/xfs_sync.c
index 7092276..08fc71f 100644
--- a/fs/xfs/xfs_sync.c
+++ b/fs/xfs/xfs_sync.c
@@ -216,71 +216,6 @@ xfs_inode_ag_iterator(
}
/*
- * Second stage of a quiesce. The data is already synced, now we have to take
- * care of the metadata. New transactions are already blocked, so we need to
- * wait for any remaining transactions to drain out before proceeding.
- *
- * The second phase ensures that the inodes are written to their
- * location on disk rather than just existing in transactions in the log. This
- * means after a quiesce there is no log replay required to write the inodes to
- * disk (this is the main difference between a sync and a quiesce).
- *
- * Note: this stops background sync work - the callers must ensure it is started
- * again when appropriate.
- */
-void
-xfs_quiesce_attr(
- struct xfs_mount *mp)
-{
- int error = 0;
-
- /* wait for all modifications to complete */
- while (atomic_read(&mp->m_active_trans) > 0)
- delay(100);
-
- /* force the log to unpin objects from the now complete transactions */
- xfs_log_force(mp, XFS_LOG_SYNC);
-
- /* reclaim inodes to do any IO before the freeze completes */
- xfs_reclaim_inodes(mp, 0);
- xfs_reclaim_inodes(mp, SYNC_WAIT);
-
- /* flush all pending changes from the AIL */
- xfs_ail_push_all_sync(mp->m_ail);
-
- /* stop background log work */
- cancel_delayed_work_sync(&mp->m_log->l_work);
-
- /*
- * Just warn here till VFS can correctly support
- * read-only remount without racing.
- */
- WARN_ON(atomic_read(&mp->m_active_trans) != 0);
-
- /* Push the superblock and write an unmount record */
- error = xfs_log_sbcount(mp);
- if (error)
- xfs_warn(mp, "xfs_attr_quiesce: failed to log sb changes. "
- "Frozen image may not be consistent.");
- xfs_log_unmount_write(mp);
-
- /*
- * At this point we might have modified the superblock again and thus
- * added an item to the AIL, thus flush it again.
- */
- xfs_ail_push_all_sync(mp->m_ail);
-
- /*
- * The superblock buffer is uncached and xfsaild_push() will lock and
- * set the XBF_ASYNC flag on the buffer. We cannot do xfs_buf_iowait()
- * here but a lock on the superblock buffer will block until iodone()
- * has completed.
- */
- xfs_buf_lock(mp->m_sb_bp);
- xfs_buf_unlock(mp->m_sb_bp);
-}
-
-/*
* Queue a new inode reclaim pass if there are reclaimable inodes and there
* isn't a reclaim pass already in progress. By default it runs every 5s based
* on the xfs syncd work default of 30s. Perhaps this should have it's own
diff --git a/fs/xfs/xfs_sync.h b/fs/xfs/xfs_sync.h
index 0beabea..0ba9c89 100644
--- a/fs/xfs/xfs_sync.h
+++ b/fs/xfs/xfs_sync.h
@@ -26,9 +26,6 @@ struct xfs_perag;
void xfs_reclaim_worker(struct work_struct *work);
-int xfs_quiesce_data(struct xfs_mount *mp);
-void xfs_quiesce_attr(struct xfs_mount *mp);
-
int xfs_reclaim_inodes(struct xfs_mount *mp, int mode);
int xfs_reclaim_inodes_count(struct xfs_mount *mp);
void xfs_reclaim_inodes_nr(struct xfs_mount *mp, int nr_to_scan);
--
1.7.10
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2012-08-30 10:57 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-30 10:57 [PATCH 00/13] xfs: remove the xfssyncd mess Dave Chinner
2012-08-30 10:57 ` [PATCH 01/13] xfs: xfs_syncd_stop must die Dave Chinner
2012-08-30 10:57 ` [PATCH 02/13] xfs: rename the xfs_syncd workqueue Dave Chinner
2012-08-30 10:57 ` [PATCH 03/13] xfs: rationalise xfs_mount_wq users Dave Chinner
2012-08-30 10:57 ` [PATCH 04/13] xfs: don't run the sync work if the filesyste is read-only Dave Chinner
2012-08-30 10:57 ` [PATCH 05/13] xfs: sync work is now only periodic log work Dave Chinner
2012-08-30 10:57 ` [PATCH 06/13] xfs: Bring some sanity to log unmounting Dave Chinner
2012-08-30 10:57 ` [PATCH 07/13] xfs: xfs_sync_data is redundant Dave Chinner
2012-08-30 10:57 ` [PATCH 08/13] xfs: xfs_sync_fsdata " Dave Chinner
2012-08-30 10:57 ` Dave Chinner [this message]
2012-08-30 10:57 ` [PATCH 10/13] xfs: xfs_quiesce_attr() should quiesce the log like unmount Dave Chinner
2012-08-30 10:57 ` [PATCH 11/13] xfs: rename xfs_sync.[ch] to xfs_icache.[ch] Dave Chinner
2012-08-30 10:57 ` [PATCH 12/13] xfs: move inode locking functions to xfs_inode.c Dave Chinner
2012-08-30 10:57 ` [PATCH 13/13] xfs: remove xfs_iget.c Dave Chinner
2012-08-30 11:07 ` Dave Chinner
-- strict thread matches above, loose matches on Subject: below --
2012-08-30 12:00 [PATCH V2 00/13] xfs: remove the xfssyncd mess Dave Chinner
2012-08-30 12:00 ` [PATCH 09/13] xfs: move xfs_quiesce_attr() into xfs_super.c Dave Chinner
2012-09-01 23:27 ` Christoph Hellwig
2012-09-04 21:03 ` Mark Tinguely
2012-09-28 4:44 [PATCH V3 00/13] xfs: remove the xfssyncd mess Dave Chinner
2012-09-28 4:44 ` [PATCH 09/13] xfs: move xfs_quiesce_attr() into xfs_super.c Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346324262-32724-10-git-send-email-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox