public inbox for linux-xfs@vger.kernel.org
 help / color / mirror / Atom feed
From: Dave Chinner <david@fromorbit.com>
To: xfs@oss.sgi.com
Subject: [PATCH 03/13] xfs: rationalise xfs_mount_wq users
Date: Thu, 30 Aug 2012 20:57:32 +1000	[thread overview]
Message-ID: <1346324262-32724-4-git-send-email-david@fromorbit.com> (raw)
In-Reply-To: <1346324262-32724-1-git-send-email-david@fromorbit.com>

From: Dave Chinner <dchinner@redhat.com>

Instead of starting and stopping background work on the xfs_mount_wq
all at the same time, separate them to where they really are needed
to start and stop.

The xfs_sync_worker, only needs to be started after all the mount
processing has completed successfully, while it needs to be stopped
before the log is unmounted.

The xfs_reclaim_worker is started on demand, and can be
stopped before the unmount process does it's own inode reclaim pass.

The xfs_flush_inodes work is run on demand, and so we really only
need to ensure that it has stopped running before we start
processing an unmount, freeze or remount,ro.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
---
 fs/xfs/xfs_mount.c |    6 ++++--
 fs/xfs/xfs_super.c |   32 +++++++++++++-------------------
 fs/xfs/xfs_sync.c  |   21 +++++----------------
 3 files changed, 22 insertions(+), 37 deletions(-)

diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index e2979ee..62106e2 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -1484,9 +1484,11 @@ xfs_unmountfs(
 
 	/*
 	 * And reclaim all inodes.  At this point there should be no dirty
-	 * inode, and none should be pinned or locked, but use synchronous
-	 * reclaim just to be sure.
+	 * inodes and none should be pinned or locked, but use synchronous
+	 * reclaim just to be sure. We can stop background inode reclaim
+	 * here as well if it is still running.
 	 */
+	cancel_delayed_work_sync(&mp->m_reclaim_work);
 	xfs_reclaim_inodes(mp, SYNC_WAIT);
 
 	xfs_qm_unmount(mp);
diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index d75fdf3..a08a648 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -918,13 +918,11 @@ xfs_fs_put_super(
 {
 	struct xfs_mount	*mp = XFS_M(sb);
 
-	xfs_filestream_unmount(mp);
-	xfs_unmountfs(mp);
-
 	cancel_delayed_work_sync(&mp->m_sync_work);
-	cancel_delayed_work_sync(&mp->m_reclaim_work);
 	cancel_work_sync(&mp->m_flush_work);
 
+	xfs_filestream_unmount(mp);
+	xfs_unmountfs(mp);
 	xfs_freesb(mp);
 	xfs_icsb_destroy_counters(mp);
 	xfs_destroy_mount_workqueues(mp);
@@ -1231,6 +1229,9 @@ xfs_fs_fill_super(
 	spin_lock_init(&mp->m_sb_lock);
 	mutex_init(&mp->m_growlock);
 	atomic_set(&mp->m_active_trans, 0);
+	INIT_WORK(&mp->m_flush_work, xfs_flush_worker);
+	INIT_DELAYED_WORK(&mp->m_sync_work, xfs_sync_worker);
+	INIT_DELAYED_WORK(&mp->m_reclaim_work, xfs_reclaim_worker);
 
 	mp->m_super = sb;
 	sb->s_fs_info = mp;
@@ -1294,15 +1295,9 @@ xfs_fs_fill_super(
 	sb->s_time_gran = 1;
 	set_posix_acl_flag(sb);
 
-	INIT_WORK(&mp->m_flush_work, xfs_flush_worker);
-	INIT_DELAYED_WORK(&mp->m_sync_work, xfs_sync_worker);
-	INIT_DELAYED_WORK(&mp->m_reclaim_work, xfs_reclaim_worker);
-
-	xfs_sync_work_queue(mp);
-
 	error = xfs_mountfs(mp);
 	if (error)
-		goto out_syncd_stop;
+		goto out_filestream_unmount;
 
 	root = igrab(VFS_I(mp->m_rootip));
 	if (!root) {
@@ -1319,12 +1314,15 @@ xfs_fs_fill_super(
 		goto out_unmount;
 	}
 
+	/*
+	 * The filesystem is successfully mounted, so we can start background
+	 * sync work now.
+	 */
+	xfs_sync_work_queue(mp);
+
 	return 0;
- out_syncd_stop:
-	cancel_delayed_work_sync(&mp->m_sync_work);
-	cancel_delayed_work_sync(&mp->m_reclaim_work);
-	cancel_work_sync(&mp->m_flush_work);
 
+ out_filestream_unmount:
 	xfs_filestream_unmount(mp);
  out_free_sb:
 	xfs_freesb(mp);
@@ -1343,10 +1341,6 @@ out_destroy_workqueues:
  out_unmount:
 	xfs_filestream_unmount(mp);
 	xfs_unmountfs(mp);
-
-	cancel_delayed_work_sync(&mp->m_sync_work);
-	cancel_delayed_work_sync(&mp->m_reclaim_work);
-	cancel_work_sync(&mp->m_flush_work);
 	goto out_free_sb;
 }
 
diff --git a/fs/xfs/xfs_sync.c b/fs/xfs/xfs_sync.c
index 7744ffe..ea8e0a1 100644
--- a/fs/xfs/xfs_sync.c
+++ b/fs/xfs/xfs_sync.c
@@ -378,9 +378,9 @@ xfs_sync_work_queue(
 }
 
 /*
- * Every sync period we need to unpin all items, reclaim inodes and sync
- * disk quotas.  We might need to cover the log to indicate that the
- * filesystem is idle and not frozen.
+ * Every sync period we need to unpin all items in the AIL and push them to
+ * disk. If there is nothing dirty, then we might need to cover the log to
+ * indicate that the filesystem is idle and not frozen.
  */
 void
 xfs_sync_worker(
@@ -390,17 +390,7 @@ xfs_sync_worker(
 					struct xfs_mount, m_sync_work);
 	int		error;
 
-	/*
-	 * We shouldn't write/force the log if we are in the mount/unmount
-	 * process or on a read only filesystem. The workqueue still needs to be
-	 * active in both cases, however, because it is used for inode reclaim
-	 * during these times.  Use the MS_ACTIVE flag to avoid doing anything
-	 * during mount.  Doing work during unmount is avoided by calling
-	 * cancel_delayed_work_sync on this work queue before tearing down
-	 * the ail and the log in xfs_log_unmount.
-	 */
-	if (!(mp->m_super->s_flags & MS_ACTIVE) &&
-	    !(mp->m_flags & XFS_MOUNT_RDONLY)) {
+	if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
 		/* dgc: errors ignored here */
 		if (mp->m_super->s_writers.frozen == SB_UNFROZEN &&
 		    xfs_log_need_covered(mp))
@@ -408,8 +398,7 @@ xfs_sync_worker(
 		else
 			xfs_log_force(mp, 0);
 
-		/* start pushing all the metadata that is currently
-		 * dirty */
+		/* start pushing all the metadata that is currently dirty */
 		xfs_ail_push_all(mp->m_ail);
 	}
 
-- 
1.7.10

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

  parent reply	other threads:[~2012-08-30 10:57 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-30 10:57 [PATCH 00/13] xfs: remove the xfssyncd mess Dave Chinner
2012-08-30 10:57 ` [PATCH 01/13] xfs: xfs_syncd_stop must die Dave Chinner
2012-08-30 10:57 ` [PATCH 02/13] xfs: rename the xfs_syncd workqueue Dave Chinner
2012-08-30 10:57 ` Dave Chinner [this message]
2012-08-30 10:57 ` [PATCH 04/13] xfs: don't run the sync work if the filesyste is read-only Dave Chinner
2012-08-30 10:57 ` [PATCH 05/13] xfs: sync work is now only periodic log work Dave Chinner
2012-08-30 10:57 ` [PATCH 06/13] xfs: Bring some sanity to log unmounting Dave Chinner
2012-08-30 10:57 ` [PATCH 07/13] xfs: xfs_sync_data is redundant Dave Chinner
2012-08-30 10:57 ` [PATCH 08/13] xfs: xfs_sync_fsdata " Dave Chinner
2012-08-30 10:57 ` [PATCH 09/13] xfs: move xfs_quiesce_attr() into xfs_super.c Dave Chinner
2012-08-30 10:57 ` [PATCH 10/13] xfs: xfs_quiesce_attr() should quiesce the log like unmount Dave Chinner
2012-08-30 10:57 ` [PATCH 11/13] xfs: rename xfs_sync.[ch] to xfs_icache.[ch] Dave Chinner
2012-08-30 10:57 ` [PATCH 12/13] xfs: move inode locking functions to xfs_inode.c Dave Chinner
2012-08-30 10:57 ` [PATCH 13/13] xfs: remove xfs_iget.c Dave Chinner
2012-08-30 11:07   ` Dave Chinner
  -- strict thread matches above, loose matches on Subject: below --
2012-08-30 12:00 [PATCH V2 00/13] xfs: remove the xfssyncd mess Dave Chinner
2012-08-30 12:00 ` [PATCH 03/13] xfs: rationalise xfs_mount_wq users Dave Chinner
2012-09-04 15:48   ` Mark Tinguely
2012-09-05  4:30     ` Dave Chinner
2012-09-05 13:16       ` Mark Tinguely
2012-09-05 14:34         ` Mark Tinguely
2012-09-06  0:46         ` Dave Chinner
2012-09-06 15:08           ` Mark Tinguely
2012-09-07  0:41             ` Dave Chinner
2012-09-11 21:25   ` Mark Tinguely

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1346324262-32724-4-git-send-email-david@fromorbit.com \
    --to=david@fromorbit.com \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox