public inbox for linux-xfs@vger.kernel.org
 help / color / mirror / Atom feed
From: Dave Chinner <david@fromorbit.com>
To: xfs@oss.sgi.com
Subject: [PATCH 09/13] xfs: move xfs_quiesce_attr() into xfs_super.c
Date: Thu, 30 Aug 2012 22:00:13 +1000	[thread overview]
Message-ID: <1346328017-2795-10-git-send-email-david@fromorbit.com> (raw)
In-Reply-To: <1346328017-2795-1-git-send-email-david@fromorbit.com>

From: Dave Chinner <dchinner@redhat.com>

Both callers of xfs_quiesce_attr() are in xfs_super.c, and there's
nothing really sync-specific about this functionality so it doesn't
really matter where it lives. Move it to benext to it's callers, so
all the remount/sync_fs code is in the one place.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
---
 fs/xfs/xfs_super.c |   67 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 fs/xfs/xfs_sync.c  |   65 --------------------------------------------------
 fs/xfs/xfs_sync.h  |    3 ---
 3 files changed, 67 insertions(+), 68 deletions(-)

diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index 2d053fb..7839817 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -1025,6 +1025,73 @@ xfs_restore_resvblks(struct xfs_mount *mp)
 	xfs_reserve_blocks(mp, &resblks, NULL);
 }
 
+/*
+ * Trigger writeback of all the dirty metadata in the file system.
+ *
+ * This ensures that the metadata is written to their location on disk rather
+ * than just existing in transactions in the log. This means after a quiesce
+ * there is no log replay required to write the inodes to disk (this is the main
+ * difference between a sync and a quiesce).
+ *
+ * This shoul deffectively mimic the code in xfs_unmountfs() and
+ * xfs_log_umount() but without tearing down any structures.
+ * XXX: bug fixes needed!
+ *
+ * Note: this stops background log work - the callers must ensure it is started
+ * again when appropriate.
+ */
+void
+xfs_quiesce_attr(
+	struct xfs_mount	*mp)
+{
+	int	error = 0;
+
+	/* wait for all modifications to complete */
+	while (atomic_read(&mp->m_active_trans) > 0)
+		delay(100);
+
+	/* force the log to unpin objects from the now complete transactions */
+	xfs_log_force(mp, XFS_LOG_SYNC);
+
+	/* reclaim inodes to do any IO before the freeze completes */
+	xfs_reclaim_inodes(mp, 0);
+	xfs_reclaim_inodes(mp, SYNC_WAIT);
+
+	/* flush all pending changes from the AIL */
+	xfs_ail_push_all_sync(mp->m_ail);
+
+	/* stop background log work */
+	cancel_delayed_work_sync(&mp->m_log->l_work);
+
+	/*
+	 * Just warn here till VFS can correctly support
+	 * read-only remount without racing.
+	 */
+	WARN_ON(atomic_read(&mp->m_active_trans) != 0);
+
+	/* Push the superblock and write an unmount record */
+	error = xfs_log_sbcount(mp);
+	if (error)
+		xfs_warn(mp, "xfs_attr_quiesce: failed to log sb changes. "
+				"Frozen image may not be consistent.");
+	xfs_log_unmount_write(mp);
+
+	/*
+	 * At this point we might have modified the superblock again and thus
+	 * added an item to the AIL, thus flush it again.
+	 */
+	xfs_ail_push_all_sync(mp->m_ail);
+
+	/*
+	 * The superblock buffer is uncached and xfsaild_push() will lock and
+	 * set the XBF_ASYNC flag on the buffer. We cannot do xfs_buf_iowait()
+	 * here but a lock on the superblock buffer will block until iodone()
+	 * has completed.
+	 */
+	xfs_buf_lock(mp->m_sb_bp);
+	xfs_buf_unlock(mp->m_sb_bp);
+}
+
 STATIC int
 xfs_fs_remount(
 	struct super_block	*sb,
diff --git a/fs/xfs/xfs_sync.c b/fs/xfs/xfs_sync.c
index 7092276..08fc71f 100644
--- a/fs/xfs/xfs_sync.c
+++ b/fs/xfs/xfs_sync.c
@@ -216,71 +216,6 @@ xfs_inode_ag_iterator(
 }
 
 /*
- * Second stage of a quiesce. The data is already synced, now we have to take
- * care of the metadata. New transactions are already blocked, so we need to
- * wait for any remaining transactions to drain out before proceeding.
- *
- * The second phase ensures that the inodes are written to their
- * location on disk rather than just existing in transactions in the log. This
- * means after a quiesce there is no log replay required to write the inodes to
- * disk (this is the main difference between a sync and a quiesce).
- *
- * Note: this stops background sync work - the callers must ensure it is started
- * again when appropriate.
- */
-void
-xfs_quiesce_attr(
-	struct xfs_mount	*mp)
-{
-	int	error = 0;
-
-	/* wait for all modifications to complete */
-	while (atomic_read(&mp->m_active_trans) > 0)
-		delay(100);
-
-	/* force the log to unpin objects from the now complete transactions */
-	xfs_log_force(mp, XFS_LOG_SYNC);
-
-	/* reclaim inodes to do any IO before the freeze completes */
-	xfs_reclaim_inodes(mp, 0);
-	xfs_reclaim_inodes(mp, SYNC_WAIT);
-
-	/* flush all pending changes from the AIL */
-	xfs_ail_push_all_sync(mp->m_ail);
-
-	/* stop background log work */
-	cancel_delayed_work_sync(&mp->m_log->l_work);
-
-	/*
-	 * Just warn here till VFS can correctly support
-	 * read-only remount without racing.
-	 */
-	WARN_ON(atomic_read(&mp->m_active_trans) != 0);
-
-	/* Push the superblock and write an unmount record */
-	error = xfs_log_sbcount(mp);
-	if (error)
-		xfs_warn(mp, "xfs_attr_quiesce: failed to log sb changes. "
-				"Frozen image may not be consistent.");
-	xfs_log_unmount_write(mp);
-
-	/*
-	 * At this point we might have modified the superblock again and thus
-	 * added an item to the AIL, thus flush it again.
-	 */
-	xfs_ail_push_all_sync(mp->m_ail);
-
-	/*
-	 * The superblock buffer is uncached and xfsaild_push() will lock and
-	 * set the XBF_ASYNC flag on the buffer. We cannot do xfs_buf_iowait()
-	 * here but a lock on the superblock buffer will block until iodone()
-	 * has completed.
-	 */
-	xfs_buf_lock(mp->m_sb_bp);
-	xfs_buf_unlock(mp->m_sb_bp);
-}
-
-/*
  * Queue a new inode reclaim pass if there are reclaimable inodes and there
  * isn't a reclaim pass already in progress. By default it runs every 5s based
  * on the xfs syncd work default of 30s. Perhaps this should have it's own
diff --git a/fs/xfs/xfs_sync.h b/fs/xfs/xfs_sync.h
index 0beabea..0ba9c89 100644
--- a/fs/xfs/xfs_sync.h
+++ b/fs/xfs/xfs_sync.h
@@ -26,9 +26,6 @@ struct xfs_perag;
 
 void xfs_reclaim_worker(struct work_struct *work);
 
-int xfs_quiesce_data(struct xfs_mount *mp);
-void xfs_quiesce_attr(struct xfs_mount *mp);
-
 int xfs_reclaim_inodes(struct xfs_mount *mp, int mode);
 int xfs_reclaim_inodes_count(struct xfs_mount *mp);
 void xfs_reclaim_inodes_nr(struct xfs_mount *mp, int nr_to_scan);
-- 
1.7.10

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

  parent reply	other threads:[~2012-08-30 11:59 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-30 12:00 [PATCH V2 00/13] xfs: remove the xfssyncd mess Dave Chinner
2012-08-30 12:00 ` [PATCH 01/13] xfs: xfs_syncd_stop must die Dave Chinner
2012-09-01 23:15   ` Christoph Hellwig
2012-09-04 16:10   ` Mark Tinguely
2012-08-30 12:00 ` [PATCH 02/13] xfs: rename the xfs_syncd workqueue Dave Chinner
2012-09-01 23:17   ` Christoph Hellwig
2012-09-03  3:09     ` Dave Chinner
2012-08-30 12:00 ` [PATCH 03/13] xfs: rationalise xfs_mount_wq users Dave Chinner
2012-09-04 15:48   ` Mark Tinguely
2012-09-05  4:30     ` Dave Chinner
2012-09-05 13:16       ` Mark Tinguely
2012-09-05 14:34         ` Mark Tinguely
2012-09-06  0:46         ` Dave Chinner
2012-09-06 15:08           ` Mark Tinguely
2012-09-07  0:41             ` Dave Chinner
2012-09-11 21:25   ` Mark Tinguely
2012-08-30 12:00 ` [PATCH 04/13] xfs: don't run the sync work if the filesyste is read-only Dave Chinner
2012-09-04 16:13   ` Mark Tinguely
2012-08-30 12:00 ` [PATCH 05/13] xfs: sync work is now only periodic log work Dave Chinner
2012-09-01 23:23   ` Christoph Hellwig
2012-09-03  3:36     ` Dave Chinner
2012-09-04 16:14   ` Mark Tinguely
2012-09-04 18:57   ` Mark Tinguely
2012-09-05  4:35     ` Dave Chinner
2012-08-30 12:00 ` [PATCH 06/13] xfs: Bring some sanity to log unmounting Dave Chinner
2012-09-01 23:28   ` Christoph Hellwig
2012-09-04 19:11   ` Mark Tinguely
2012-08-30 12:00 ` [PATCH 07/13] xfs: xfs_sync_data is redundant Dave Chinner
2012-09-01 23:24   ` Christoph Hellwig
2012-09-03  6:08     ` Dave Chinner
2012-09-04 20:48   ` Mark Tinguely
2012-09-06  0:53     ` Dave Chinner
2012-08-30 12:00 ` [PATCH 08/13] xfs: xfs_sync_fsdata " Dave Chinner
2012-09-01 23:27   ` Christoph Hellwig
2012-09-04 20:59   ` Mark Tinguely
2012-08-30 12:00 ` Dave Chinner [this message]
2012-09-01 23:27   ` [PATCH 09/13] xfs: move xfs_quiesce_attr() into xfs_super.c Christoph Hellwig
2012-09-04 21:03   ` Mark Tinguely
2012-08-30 12:00 ` [PATCH 10/13] xfs: xfs_quiesce_attr() should quiesce the log like unmount Dave Chinner
2012-09-01 23:29   ` Christoph Hellwig
2012-09-04 21:04   ` Mark Tinguely
2012-08-30 12:00 ` [PATCH 11/13] xfs: rename xfs_sync.[ch] to xfs_icache.[ch] Dave Chinner
2012-09-01 23:30   ` Christoph Hellwig
2012-09-04 21:06   ` Mark Tinguely
2012-08-30 12:00 ` [PATCH 12/13] xfs: move inode locking functions to xfs_inode.c Dave Chinner
2012-09-01 23:30   ` Christoph Hellwig
2012-09-04 21:07   ` Mark Tinguely
2012-08-30 12:00 ` [PATCH 13/13] xfs: remove xfs_iget.c Dave Chinner
2012-09-01 23:31   ` Christoph Hellwig
2012-09-04 21:11   ` Mark Tinguely
2012-08-30 12:15 ` [PATCH V2 00/13] xfs: remove the xfssyncd mess Markus Trippelsdorf
2012-08-30 22:51   ` Dave Chinner
2012-08-31  6:18     ` Markus Trippelsdorf
2012-08-31  8:42       ` Dave Chinner
2012-08-31  9:30         ` Markus Trippelsdorf
2012-08-31 14:01 ` Mark Tinguely
2012-09-03  4:05   ` Dave Chinner
2012-09-04  0:13     ` Mark Tinguely
2012-09-25  9:26     ` Christoph Hellwig
2012-09-25  9:35       ` Dave Chinner
  -- strict thread matches above, loose matches on Subject: below --
2012-09-28  4:44 [PATCH V3 " Dave Chinner
2012-09-28  4:44 ` [PATCH 09/13] xfs: move xfs_quiesce_attr() into xfs_super.c Dave Chinner
2012-08-30 10:57 [PATCH 00/13] xfs: remove the xfssyncd mess Dave Chinner
2012-08-30 10:57 ` [PATCH 09/13] xfs: move xfs_quiesce_attr() into xfs_super.c Dave Chinner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1346328017-2795-10-git-send-email-david@fromorbit.com \
    --to=david@fromorbit.com \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox