From: Dave Chinner <david@fromorbit.com>
To: xfs@oss.sgi.com
Subject: [PATCH 14/32] xfs: verify AGFL blocks as they are read from disk
Date: Mon, 12 Nov 2012 22:54:06 +1100 [thread overview]
Message-ID: <1352721264-3700-15-git-send-email-david@fromorbit.com> (raw)
In-Reply-To: <1352721264-3700-1-git-send-email-david@fromorbit.com>
From: Dave Chinner <dchinner@redhat.com>
Add an AGFL block verify callback function and pass it into the
buffer read functions.
While this commit adds verification code to the AGFL, it cannot be
used reliably until the CRC format change comes along as mkfs does
not initialise the full AGFL. Hence it can be full of garbage at the
first mount and will fail verification right now. CRC enabled
filesystems won't have this problem, so leave the code that has
already been written ifdef'd out until the proper time.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
---
fs/xfs/xfs_alloc.c | 39 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 38 insertions(+), 1 deletion(-)
diff --git a/fs/xfs/xfs_alloc.c b/fs/xfs/xfs_alloc.c
index cebac40..506b346 100644
--- a/fs/xfs/xfs_alloc.c
+++ b/fs/xfs/xfs_alloc.c
@@ -430,6 +430,43 @@ xfs_alloc_fixup_trees(
return 0;
}
+void
+xfs_agfl_read_verify(
+ struct xfs_buf *bp)
+{
+#ifdef WHEN_CRCS_COME_ALONG
+ /*
+ * we cannot actually do any verification of the AGFL because mkfs does
+ * not initialise the AGFL to zero or NULL. Hence the only valid part of
+ * the AGFL is what the AGF says is active. We can't get to the AGF, so
+ * we can't verify just those entries are valid.
+ *
+ * This problem goes away when the CRC format change comes along as that
+ * requires the AGFL to be initialised by mkfs. At that point, we can
+ * verify the blocks in the agfl -active or not- lie within the bounds
+ * of the AG. Until then, just leave this check ifdef'd out.
+ */
+ struct xfs_mount *mp = bp->b_target->bt_mount;
+ struct xfs_agfl *agfl = XFS_BUF_TO_AGFL(bp);
+ int agfl_ok = 1;
+
+ int i;
+
+ for (i = 0; i < XFS_AGFL_SIZE(mp); i++) {
+ if (be32_to_cpu(agfl->agfl_bno[i]) == NULLAGBLOCK ||
+ be32_to_cpu(agfl->agfl_bno[i]) >= mp->m_sb.sb_agblocks)
+ agfl_ok = 0;
+ }
+
+ if (!agfl_ok) {
+ XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, agfl);
+ xfs_buf_ioerror(bp, EFSCORRUPTED);
+ }
+#endif
+ bp->b_iodone = NULL;
+ xfs_buf_ioend(bp, 0);
+}
+
/*
* Read in the allocation group free block array.
*/
@@ -447,7 +484,7 @@ xfs_alloc_read_agfl(
error = xfs_trans_read_buf(
mp, tp, mp->m_ddev_targp,
XFS_AG_DADDR(mp, agno, XFS_AGFL_DADDR(mp)),
- XFS_FSS_TO_BB(mp, 1), 0, &bp, NULL);
+ XFS_FSS_TO_BB(mp, 1), 0, &bp, xfs_agfl_read_verify);
if (error)
return error;
ASSERT(!xfs_buf_geterror(bp));
--
1.7.10
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2012-11-12 11:53 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-12 11:53 [PATCH 00/32] xfs: current queue for 3.8 Dave Chinner
2012-11-12 11:53 ` [PATCH 01/32] xfs: add more attribute tree trace points Dave Chinner
2012-11-12 22:11 ` Mark Tinguely
2012-11-15 16:18 ` Christoph Hellwig
2012-11-12 11:53 ` [PATCH 02/32] xfs: remove xfs_tosspages Dave Chinner
2012-11-14 6:42 ` [PATCH 02/32 V2] " Dave Chinner
2012-11-14 18:50 ` Andrew Dahl
2012-11-14 18:52 ` [PATCH 02.5/32] " Andrew Dahl
2012-11-14 19:59 ` Mark Tinguely
2012-11-21 8:05 ` Dave Chinner
2012-11-22 5:10 ` Andrew Dahl
2012-11-22 23:29 ` Dave Chinner
2012-11-26 18:04 ` Andrew Dahl
2012-11-14 21:17 ` [PATCH 02/32 V2] " Dave Chinner
2012-11-15 16:22 ` Christoph Hellwig
2012-11-12 11:53 ` [PATCH 03/32] xfs: remove xfs_wait_on_pages() Dave Chinner
2012-11-15 16:23 ` Christoph Hellwig
2012-11-12 11:53 ` [PATCH 04/32] xfs: remove xfs_flush_pages Dave Chinner
2012-11-15 16:24 ` Christoph Hellwig
2012-11-12 11:53 ` [PATCH 05/32] xfs: remove xfs_flushinval_pages Dave Chinner
2012-11-15 16:28 ` Christoph Hellwig
2012-11-15 20:54 ` Dave Chinner
2012-11-21 10:12 ` Christoph Hellwig
2012-11-12 11:53 ` [PATCH 06/32] xfs: use btree block initialisation functions in growfs Dave Chinner
2012-11-13 21:18 ` Rich Johnston
2012-11-23 12:40 ` Christoph Hellwig
2012-11-23 21:25 ` Dave Chinner
2012-11-12 11:53 ` [PATCH 07/32] xfs: growfs: use uncached buffers for new headers Dave Chinner
2012-11-13 21:18 ` Rich Johnston
2012-11-12 11:54 ` [PATCH 08/32] xfs: make growfs initialise the AGFL header Dave Chinner
2012-11-13 21:18 ` Rich Johnston
2012-11-23 12:41 ` Christoph Hellwig
2012-11-23 21:27 ` Dave Chinner
2012-11-12 11:54 ` [PATCH 09/32] xfs: make buffer read verication an IO completion function Dave Chinner
2012-11-12 11:54 ` [PATCH 10/32] xfs: uncached buffer reads need to return an error Dave Chinner
2012-11-12 11:54 ` [PATCH 11/32] xfs: verify superblocks as they are read from disk Dave Chinner
2012-11-23 12:42 ` Christoph Hellwig
2012-11-12 11:54 ` [PATCH 12/32] xfs: verify AGF blocks " Dave Chinner
2012-11-13 1:09 ` Phil White
2012-11-13 3:07 ` Dave Chinner
2012-11-14 6:44 ` [PATCH 12/32 V2] " Dave Chinner
2012-11-14 21:28 ` Mark Tinguely
2012-11-12 11:54 ` [PATCH 13/32] xfs: verify AGI " Dave Chinner
2012-11-12 11:54 ` Dave Chinner [this message]
2012-11-12 11:54 ` [PATCH 15/32] xfs: verify inode buffers " Dave Chinner
2012-11-12 11:54 ` [PATCH 16/32] xfs: verify btree blocks " Dave Chinner
2012-11-12 11:54 ` [PATCH 17/32] xfs: verify dquot " Dave Chinner
2012-11-14 6:50 ` [PATCH 17/32 V2] " Dave Chinner
2012-11-15 17:55 ` Mark Tinguely
2012-11-15 20:48 ` Dave Chinner
2012-11-15 21:01 ` Mark Tinguely
2012-11-15 21:16 ` Dave Chinner
2012-11-15 21:34 ` Mark Tinguely
2012-11-15 22:01 ` Dave Chinner
2012-11-15 22:09 ` Dave Chinner
2012-11-15 22:26 ` Mark Tinguely
2012-11-15 22:33 ` Dave Chinner
2012-11-16 1:22 ` Dave Chinner
2012-11-12 11:54 ` [PATCH 18/32] xfs: add verifier callback to directory read code Dave Chinner
2012-11-12 11:54 ` [PATCH 19/32] xfs: factor dir2 block read operations Dave Chinner
2012-11-15 3:09 ` Ben Myers
2012-11-15 5:59 ` Dave Chinner
2012-11-12 11:54 ` [PATCH 20/32] xfs: verify dir2 block format buffers Dave Chinner
2012-11-12 11:54 ` [PATCH 21/32] xfs: factor dir2 free block reading Dave Chinner
2012-11-12 11:54 ` [PATCH 22/32] xfs: factor out dir2 data " Dave Chinner
2012-11-12 11:54 ` [PATCH 23/32] xfs: factor dir2 leaf read Dave Chinner
2012-11-12 11:54 ` [PATCH 24/32] xfs: factor and verify attr leaf reads Dave Chinner
2012-11-12 11:54 ` [PATCH 25/32] xfs: add xfs_da_node verification Dave Chinner
2012-11-12 11:54 ` [PATCH 26/32] xfs: Add verifiers to dir2 data readahead Dave Chinner
2012-11-12 11:54 ` [PATCH 27/32] xfs: add buffer pre-write callback Dave Chinner
2012-11-15 6:02 ` [PATCH 27/32 REPOST] " Dave Chinner
2012-11-12 11:54 ` [PATCH 28/32] xfs: add pre-write metadata buffer verifier callbacks Dave Chinner
2012-11-14 6:52 ` [PATCH 28/32 V2] " Dave Chinner
2012-11-14 22:23 ` Mark Tinguely
2012-11-12 11:54 ` [PATCH 29/32] xfs: connect up write verifiers to new buffers Dave Chinner
2012-11-14 6:53 ` [PATCH 29/32 V2] " Dave Chinner
2012-11-12 11:54 ` [PATCH 30/32] xfs: convert buffer verifiers to an ops structure Dave Chinner
2012-11-14 6:54 ` [PATCH 30/32 V2] " Dave Chinner
2012-11-12 11:54 ` [PATCH 31/32] xfs: add CRC infrastructure Dave Chinner
2012-11-12 15:37 ` Mark Tinguely
2012-11-15 22:20 ` [PATCH 31/32 V2] " Dave Chinner
2012-11-12 11:54 ` [PATCH 32/32] xfs: add CRC checks to the log Dave Chinner
2012-11-12 15:37 ` Mark Tinguely
2012-11-13 23:26 ` [PATCH 00/32] xfs: current queue for 3.8 Ben Myers
2012-11-14 6:02 ` Dave Chinner
2012-11-14 20:42 ` Ben Myers
2012-11-14 21:27 ` Ben Myers
2012-11-15 4:40 ` Ben Myers
2012-11-15 6:03 ` Dave Chinner
2012-11-16 4:31 ` Ben Myers
2012-11-20 2:27 ` Ben Myers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1352721264-3700-15-git-send-email-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox