From: Dave Chinner <david@fromorbit.com>
To: xfs@oss.sgi.com
Subject: [PATCH 18/32] db: rewrite bbmap to use xfs_buf_map
Date: Mon, 30 Sep 2013 13:15:30 +1000 [thread overview]
Message-ID: <1380510944-8571-19-git-send-email-david@fromorbit.com> (raw)
In-Reply-To: <1380510944-8571-1-git-send-email-david@fromorbit.com>
From: Dave Chinner <dchinner@redhat.com>
Use the libxfs struct xfs_buf_map for recording the extent layout of
discontiguous buffers and convert the read/write to decode them
directory and use read_buf/write_buf to do the extent IO. This
brings the physical xfs_db IO code to be very close to the model
that libxfs uses.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
---
db/bmap.c | 15 ++++-----------
db/io.c | 58 ++++++++++++----------------------------------------------
db/io.h | 3 ++-
3 files changed, 18 insertions(+), 58 deletions(-)
diff --git a/db/bmap.c b/db/bmap.c
index 0ef7a62..3951b9f 100644
--- a/db/bmap.c
+++ b/db/bmap.c
@@ -293,20 +293,13 @@ make_bbmap(
int nex,
bmap_ext_t *bmp)
{
- int d;
- xfs_dfsbno_t dfsbno;
int i;
- int j;
- int k;
- for (i = 0, d = 0; i < nex; i++) {
- dfsbno = bmp[i].startblock;
- for (j = 0; j < bmp[i].blockcount; j++, dfsbno++) {
- for (k = 0; k < blkbb; k++)
- bbmap->b[d++] =
- XFS_FSB_TO_DADDR(mp, dfsbno) + k;
- }
+ for (i = 0; i < nex; i++) {
+ bbmap->b[i].bm_bn = XFS_FSB_TO_DADDR(mp, bmp[i].startblock);
+ bbmap->b[i].bm_len = XFS_FSB_TO_BB(mp, bmp[i].blockcount);
}
+ bbmap->nmaps = nex;
}
static xfs_fsblock_t
diff --git a/db/io.c b/db/io.c
index fa11646..01a5970 100644
--- a/db/io.c
+++ b/db/io.c
@@ -478,28 +478,16 @@ write_bbs(
void *bufp,
bbmap_t *bbmap)
{
- int c;
- int i;
int j;
int rval = EINVAL; /* initialize for zero `count' case */
- for (j = 0; j < count; j++) {
- bbno = bbmap->b[j];
- if (lseek64(x.dfd, bbno << BBSHIFT, SEEK_SET) < 0) {
- rval = errno;
- dbprintf(_("can't seek in filesystem at bb %lld\n"), bbno);
- return rval;
- }
- c = BBTOB(1);
- i = (int)write(x.dfd, (char *)bufp + BBTOB(j), c);
- if (i < 0) {
- rval = errno;
- } else if (i < c) {
- rval = -1;
- } else
- rval = 0;
+ for (j = 0; j < count;) {
+ rval = write_buf(bbmap->b[j].bm_bn, bbmap->b[j].bm_len,
+ (char *)bufp + BBTOB(j));
if (rval)
break;
+
+ j += bbmap->b[j].bm_len;
}
return rval;
}
@@ -512,45 +500,23 @@ read_bbs(
bbmap_t *bbmap)
{
void *buf;
- int c;
- int i;
int j;
int rval = EINVAL;
if (count <= 0)
count = 1;
- c = BBTOB(count);
if (*bufp == NULL)
- buf = xmalloc(c);
+ buf = xmalloc(BBTOB(count));
else
buf = *bufp;
- for (j = 0; j < count; j++) {
- bbno = bbmap->b[j];
- if (lseek64(x.dfd, bbno << BBSHIFT, SEEK_SET) < 0) {
- rval = errno;
- dbprintf(_("can't seek in filesystem at bb %lld\n"), bbno);
- if (*bufp == NULL)
- xfree(buf);
- buf = NULL;
- } else {
- c = BBTOB(1);
- i = (int)read(x.dfd, (char *)buf + BBTOB(j), c);
- if (i < 0) {
- rval = errno;
- if (*bufp == NULL)
- xfree(buf);
- buf = NULL;
- } else if (i < c) {
- rval = -1;
- if (*bufp == NULL)
- xfree(buf);
- buf = NULL;
- } else
- rval = 0;
- }
- if (buf == NULL)
+ for (j = 0; j < count;) {
+ rval = read_buf(bbmap->b[j].bm_bn, bbmap->b[j].bm_len,
+ (char *)buf + BBTOB(j));
+ if (rval)
break;
+
+ j += bbmap->b[j].bm_len;
}
if (*bufp == NULL)
*bufp = buf;
diff --git a/db/io.h b/db/io.h
index 9ea6223..c7641d5 100644
--- a/db/io.h
+++ b/db/io.h
@@ -20,7 +20,8 @@ struct typ;
#define BBMAP_SIZE (XFS_MAX_BLOCKSIZE / BBSIZE)
typedef struct bbmap {
- __int64_t b[BBMAP_SIZE];
+ int nmaps;
+ struct xfs_buf_map b[BBMAP_SIZE];
} bbmap_t;
typedef struct iocur {
--
1.8.3.2
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2013-09-30 3:15 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1380510944-8571-1-git-send-email-david@fromorbit.com>
2013-09-30 3:15 ` [PATCH 01/32] xfsprogs: fix automatic dependency generation Dave Chinner
2013-10-08 23:00 ` Eric Sandeen
2013-09-30 3:15 ` [PATCH 02/32] libxfs: fix missing filetype updates to xfs_dir2.c Dave Chinner
2013-10-08 22:53 ` Eric Sandeen
2013-10-09 20:41 ` Dave Chinner
2013-10-18 16:45 ` Rich Johnston
2013-09-30 3:15 ` [PATCH 03/32] xfs: fix some minor sparse warnings Dave Chinner
2013-10-08 22:56 ` Eric Sandeen
2013-10-09 20:43 ` Dave Chinner
2013-09-30 3:15 ` [PATCH 04/32] xfs: check magic numbers in dir3 leaf verifier first Dave Chinner
2013-10-08 23:03 ` Eric Sandeen
2013-10-09 20:45 ` Dave Chinner
2013-10-09 20:50 ` Eric Sandeen
2013-09-30 3:15 ` [PATCH 05/32] xfs: ensure we copy buffer type in da btree root splits Dave Chinner
2013-10-08 23:06 ` Eric Sandeen
2013-10-18 16:49 ` Rich Johnston
2013-09-30 3:15 ` [PATCH 06/32] xfs: don't assert fail on bad inode numbers Dave Chinner
2013-10-08 23:09 ` Eric Sandeen
2013-09-30 3:15 ` [PATCH 07/32] xfs: dirent dtype presence is dependent on directory magic numbers Dave Chinner
2013-10-08 23:30 ` Eric Sandeen
2013-10-09 20:51 ` Dave Chinner
2013-10-09 20:57 ` Eric Sandeen
2013-10-18 22:38 ` Rich Johnston
2013-09-30 3:15 ` [PATCH 08/32] xfs: create a shared header file for format-related information Dave Chinner
2013-10-08 23:37 ` Eric Sandeen
2013-10-18 16:59 ` Rich Johnston
2013-10-18 22:40 ` Dave Chinner
2013-10-18 22:43 ` Rich Johnston
2013-10-22 18:07 ` Rich Johnston
2013-09-30 3:15 ` [PATCH 09/32] xfs: unify directory/attribute format definitions Dave Chinner
2013-10-14 20:44 ` Eric Sandeen
2013-10-18 20:32 ` Rich Johnston
2013-10-22 22:25 ` Dave Chinner
2013-09-30 3:15 ` [PATCH 10/32] xfs: split dquot buffer operations out Dave Chinner
2013-09-30 3:15 ` [PATCH 11/32] xfs: decouple inode and bmap btree header files Dave Chinner
2013-09-30 3:15 ` [PATCH 12/32] libxfs: unify xfs_btree.c with kernel code Dave Chinner
2013-09-30 3:15 ` [PATCH 13/32] libxfs: bmap btree owner swap support Dave Chinner
2013-09-30 3:15 ` [PATCH 14/32] libxfs: xfs_rtalloc.c becomes xfs_rtbitmap.c Dave Chinner
2013-09-30 3:15 ` [PATCH 15/32] libxfs: bring across inode buffer readahead verifier changes Dave Chinner
2013-09-30 3:15 ` [PATCH 16/32] libxfs: Minor cleanup and bug fix sync Dave Chinner
2013-09-30 3:15 ` [PATCH 17/32] db: separate out straight buffer IO from map based IO Dave Chinner
2013-09-30 3:15 ` Dave Chinner [this message]
2013-09-30 3:15 ` [PATCH 19/32] db: rewrite IO engine to use libxfs Dave Chinner
2013-09-30 3:15 ` [PATCH 20/32] db: introduce verifier support into set_cur Dave Chinner
2013-09-30 3:15 ` [PATCH 21/32] db: indicate if the CRC on a buffer is correct or not Dave Chinner
2013-09-30 3:15 ` [PATCH 22/32] db: verify and calculate inode CRCs Dave Chinner
2013-09-30 3:15 ` [PATCH 23/32] db: verify and calculate dquot CRCs Dave Chinner
2013-09-30 3:15 ` [PATCH 24/32] db: add a special directory buffer verifier Dave Chinner
2013-09-30 3:15 ` [PATCH 25/32] db: add a special attribute " Dave Chinner
2013-09-30 3:15 ` [PATCH 26/32] db: re-enable write support for v5 filesystems Dave Chinner
2013-09-30 3:15 ` [PATCH 27/32] libxfs: fix root inode handling inconsistencies Dave Chinner
2013-09-30 3:15 ` [PATCH 28/32] xfs_db: avoid libxfs buffer lookup warnings Dave Chinner
2013-09-30 3:15 ` [PATCH 29/32] libxfs: work around do_div() not handling 32 bit numerators Dave Chinner
2013-09-30 3:15 ` [PATCH 30/32] db: enable metadump on CRC filesystems Dave Chinner
2013-09-30 3:15 ` [PATCH 31/32] xfs: support larger inode clusters on v5 filesystems Dave Chinner
2013-09-30 3:15 ` [PATCH 32/32] xfsprogs: kill experimental warnings for " Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1380510944-8571-19-git-send-email-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox