From: Dave Chinner <david@fromorbit.com>
To: xfs@oss.sgi.com
Subject: [PATCH 09/30] libxfs: bring across inode buffer readahead verifier changes
Date: Wed, 30 Oct 2013 15:31:00 +1100 [thread overview]
Message-ID: <1383107481-28937-10-git-send-email-david@fromorbit.com> (raw)
In-Reply-To: <1383107481-28937-1-git-send-email-david@fromorbit.com>
From: Dave Chinner <dchinner@redhat.com>
These were made for log recovery readahead in the kernel, so are not
directly used in userspace. Hence bringing the change across is
simply to keep files in sync.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
---
libxfs/xfs_inode_buf.c | 41 ++++++++++++++++++++++++++++++++++++-----
1 file changed, 36 insertions(+), 5 deletions(-)
diff --git a/libxfs/xfs_inode_buf.c b/libxfs/xfs_inode_buf.c
index b096f77..67d5eb4 100644
--- a/libxfs/xfs_inode_buf.c
+++ b/libxfs/xfs_inode_buf.c
@@ -46,9 +46,22 @@ xfs_inobp_check(
}
#endif
+/*
+ * If we are doing readahead on an inode buffer, we might be in log recovery
+ * reading an inode allocation buffer that hasn't yet been replayed, and hence
+ * has not had the inode cores stamped into it. Hence for readahead, the buffer
+ * may be potentially invalid.
+ *
+ * If the readahead buffer is invalid, we don't want to mark it with an error,
+ * but we do want to clear the DONE status of the buffer so that a followup read
+ * will re-read it from disk. This will ensure that we don't get an unnecessary
+ * warnings during log recovery and we don't get unnecssary panics on debug
+ * kernels.
+ */
static void
xfs_inode_buf_verify(
- struct xfs_buf *bp)
+ struct xfs_buf *bp,
+ bool readahead)
{
struct xfs_mount *mp = bp->b_target->bt_mount;
int i;
@@ -69,6 +82,11 @@ xfs_inode_buf_verify(
if (unlikely(XFS_TEST_ERROR(!di_ok, mp,
XFS_ERRTAG_ITOBP_INOTOBP,
XFS_RANDOM_ITOBP_INOTOBP))) {
+ if (readahead) {
+ bp->b_flags &= ~XBF_DONE;
+ return;
+ }
+
xfs_buf_ioerror(bp, EFSCORRUPTED);
XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_HIGH,
mp, dip);
@@ -87,14 +105,21 @@ static void
xfs_inode_buf_read_verify(
struct xfs_buf *bp)
{
- xfs_inode_buf_verify(bp);
+ xfs_inode_buf_verify(bp, false);
+}
+
+static void
+xfs_inode_buf_readahead_verify(
+ struct xfs_buf *bp)
+{
+ xfs_inode_buf_verify(bp, true);
}
static void
xfs_inode_buf_write_verify(
struct xfs_buf *bp)
{
- xfs_inode_buf_verify(bp);
+ xfs_inode_buf_verify(bp, false);
}
const struct xfs_buf_ops xfs_inode_buf_ops = {
@@ -102,6 +127,12 @@ const struct xfs_buf_ops xfs_inode_buf_ops = {
.verify_write = xfs_inode_buf_write_verify,
};
+const struct xfs_buf_ops xfs_inode_buf_ra_ops = {
+ .verify_read = xfs_inode_buf_readahead_verify,
+ .verify_write = xfs_inode_buf_write_verify,
+};
+
+
/*
* This routine is called to map an inode to the buffer containing the on-disk
* version of the inode. It returns a pointer to the buffer containing the
@@ -191,7 +222,7 @@ xfs_dinode_from_disk(
to->di_ino = be64_to_cpu(from->di_ino);
to->di_lsn = be64_to_cpu(from->di_lsn);
memcpy(to->di_pad2, from->di_pad2, sizeof(to->di_pad2));
- platform_uuid_copy(&to->di_uuid, &from->di_uuid);
+ uuid_copy(&to->di_uuid, &from->di_uuid);
}
}
@@ -237,7 +268,7 @@ xfs_dinode_to_disk(
to->di_ino = cpu_to_be64(from->di_ino);
to->di_lsn = cpu_to_be64(from->di_lsn);
memcpy(to->di_pad2, from->di_pad2, sizeof(to->di_pad2));
- platform_uuid_copy(&to->di_uuid, &from->di_uuid);
+ uuid_copy(&to->di_uuid, &from->di_uuid);
to->di_flushiter = 0;
} else {
to->di_flushiter = cpu_to_be16(from->di_flushiter);
--
1.8.4.rc3
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2013-10-30 4:31 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-30 4:30 [PATCH 00/30 V3] xfsprogs: CRC write support for xfs_db Dave Chinner
2013-10-30 4:30 ` [PATCH 01/30] xfsprogs: fix automatic dependency generation Dave Chinner
2013-10-31 14:44 ` Christoph Hellwig
2013-10-30 4:30 ` [PATCH 02/30] xfs: fix some minor sparse warnings Dave Chinner
2013-10-31 14:44 ` Christoph Hellwig
2013-10-30 4:30 ` [PATCH 03/30] xfs: create a shared header file for format-related information Dave Chinner
2013-10-31 14:45 ` Christoph Hellwig
2013-10-30 4:30 ` [PATCH 04/30] xfs: split dquot buffer operations out Dave Chinner
2013-10-31 14:45 ` Christoph Hellwig
2013-10-30 4:30 ` [PATCH 05/30] xfs: decouple inode and bmap btree header files Dave Chinner
2013-10-31 14:45 ` Christoph Hellwig
2013-10-30 4:30 ` [PATCH 06/30] libxfs: unify xfs_btree.c with kernel code Dave Chinner
2013-10-31 14:46 ` Christoph Hellwig
2013-10-30 4:30 ` [PATCH 07/30] libxfs: bmap btree owner swap support Dave Chinner
2013-10-31 14:47 ` Christoph Hellwig
2013-10-30 4:30 ` [PATCH 08/30] libxfs: xfs_rtalloc.c becomes xfs_rtbitmap.c Dave Chinner
2013-10-31 14:48 ` Christoph Hellwig
2013-10-30 4:31 ` Dave Chinner [this message]
2013-10-31 14:48 ` [PATCH 09/30] libxfs: bring across inode buffer readahead verifier changes Christoph Hellwig
2013-10-30 4:31 ` [PATCH 10/30] libxfs: Minor cleanup and bug fix sync Dave Chinner
2013-10-31 14:48 ` Christoph Hellwig
2013-10-30 4:31 ` [PATCH 11/30] xfs: remove newlines from strings passed to __xfs_printk Dave Chinner
2013-10-31 14:49 ` Christoph Hellwig
2013-10-30 4:31 ` [PATCH 12/30] xfs: fix the wrong new_size/rnew_size at xfs_iext_realloc_direct() Dave Chinner
2013-10-31 14:49 ` Christoph Hellwig
2013-10-30 4:31 ` [PATCH 13/30] xfs: fix node forward in xfs_node_toosmall Dave Chinner
2013-10-31 14:49 ` Christoph Hellwig
2013-10-30 4:31 ` [PATCH 14/30] xfs: don't emit corruption noise on fs probes Dave Chinner
2013-10-31 14:49 ` Christoph Hellwig
2013-10-30 4:31 ` [PATCH 15/30] db: separate out straight buffer IO from map based IO Dave Chinner
2013-10-31 14:56 ` Christoph Hellwig
2013-10-31 21:50 ` Dave Chinner
2013-11-01 12:51 ` Christoph Hellwig
2013-10-30 4:31 ` [PATCH 16/30] db: rewrite bbmap to use xfs_buf_map Dave Chinner
2013-10-31 15:06 ` Christoph Hellwig
2013-10-30 4:31 ` [PATCH 17/30] db: rewrite IO engine to use libxfs Dave Chinner
2013-10-31 15:10 ` Christoph Hellwig
2013-10-31 21:59 ` Dave Chinner
2013-10-30 4:31 ` [PATCH 18/30] db: introduce verifier support into set_cur Dave Chinner
2013-11-01 13:07 ` Christoph Hellwig
2013-10-30 4:31 ` [PATCH 19/30] db: indicate if the CRC on a buffer is correct or not Dave Chinner
2013-11-01 13:09 ` Christoph Hellwig
2013-10-30 4:31 ` [PATCH 20/30] db: verify and calculate inode CRCs Dave Chinner
2013-11-04 9:05 ` Christoph Hellwig
2013-11-05 0:18 ` Dave Chinner
2013-10-30 4:31 ` [PATCH 21/30] db: verify and calculate dquot CRCs Dave Chinner
2013-11-04 9:06 ` Christoph Hellwig
2013-11-05 0:25 ` Dave Chinner
2013-10-30 4:31 ` [PATCH 22/30] db: add a special directory buffer verifier Dave Chinner
2013-11-04 9:07 ` Christoph Hellwig
2013-10-30 4:31 ` [PATCH 23/30] db: add a special attribute " Dave Chinner
2013-11-04 9:07 ` Christoph Hellwig
2013-10-30 4:31 ` [PATCH 24/30] db: re-enable write support for v5 filesystems Dave Chinner
2013-11-04 9:07 ` Christoph Hellwig
2013-10-30 4:31 ` [PATCH 25/30] libxfs: fix root inode handling inconsistencies Dave Chinner
2013-10-30 10:23 ` Christoph Hellwig
2013-10-30 21:59 ` Dave Chinner
2013-10-31 4:13 ` [PATCH 25/30 V2] " Dave Chinner
2013-10-31 15:00 ` Christoph Hellwig
2013-10-31 22:04 ` Dave Chinner
2013-11-01 13:03 ` Christoph Hellwig
2013-11-04 23:22 ` Dave Chinner
2013-11-05 9:05 ` Christoph Hellwig
2013-10-30 4:31 ` [PATCH 26/30] xfs_db: avoid libxfs buffer lookup warnings Dave Chinner
2013-11-04 9:12 ` Christoph Hellwig
2013-11-05 0:52 ` Dave Chinner
2013-11-05 9:06 ` Christoph Hellwig
2013-10-30 4:31 ` [PATCH 27/30] libxfs: work around do_div() not handling 32 bit numerators Dave Chinner
2013-11-04 9:16 ` Christoph Hellwig
2013-11-05 1:55 ` Dave Chinner
2013-10-30 4:31 ` [PATCH 28/30] db: enable metadump on CRC filesystems Dave Chinner
2013-11-04 9:18 ` Christoph Hellwig
2013-10-30 4:31 ` [PATCH 29/30] xfs: support larger inode clusters on v5 filesystems Dave Chinner
2013-11-04 9:18 ` Christoph Hellwig
2013-10-30 4:31 ` [PATCH 30/30] xfsprogs: kill experimental warnings for " Dave Chinner
2013-11-04 9:19 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1383107481-28937-10-git-send-email-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox