From: Eryu Guan <eguan@redhat.com>
To: xfs@oss.sgi.com
Cc: Eryu Guan <eguan@redhat.com>
Subject: [PATCH] common: new function to get real device path name and basename
Date: Tue, 22 Apr 2014 11:27:27 +0800 [thread overview]
Message-ID: <1398137247-4883-1-git-send-email-eguan@redhat.com> (raw)
If TEST_DEV or SCRATCH_DEV is symlink(mostly a lvm lv), a simple
basename is not enough, symlink should be followed.
This task is common enough, so introduce new helper functions and
replace all readlink calls in
ext4/305
generic/009
generic/019
generic/285
generic/312
Signed-off-by: Eryu Guan <eguan@redhat.com>
---
common/rc | 16 ++++++++++++++++
tests/ext4/305 | 2 +-
tests/generic/009 | 2 +-
tests/generic/019 | 4 +---
tests/generic/285 | 2 +-
tests/generic/312 | 2 +-
6 files changed, 21 insertions(+), 7 deletions(-)
diff --git a/common/rc b/common/rc
index acf419b..68b040d 100644
--- a/common/rc
+++ b/common/rc
@@ -2302,6 +2302,22 @@ init_rc()
export XFS_IO_PROG="$XFS_IO_PROG -F"
}
+# get real device path name by following link
+_real_dev()
+{
+ local _dev=$1
+ if [ -b "$_dev" ] && [ -L "$_dev" ]; then
+ _dev=`readlink -f "$_dev"`
+ fi
+ echo $_dev
+}
+
+# basename of a device
+_basename_dev()
+{
+ echo `basename $(_real_dev $1)`
+}
+
init_rc
################################################################################
diff --git a/tests/ext4/305 b/tests/ext4/305
index eee461a..645f5c8 100755
--- a/tests/ext4/305
+++ b/tests/ext4/305
@@ -49,7 +49,7 @@ _require_scratch
rm -f $seqres.full
echo "Silence is golden"
-DEV_BASENAME=$(basename $(readlink -f $SCRATCH_DEV))
+DEV_BASENAME=$(_basename_dev $SCRATCH_DEV)
echo "Start test on device $SCRATCH_DEV, basename $DEV_BASENAME" >$seqres.full
_scratch_mkfs >>$seqres.full 2>&1
diff --git a/tests/generic/009 b/tests/generic/009
index b7b0b3f..0886594 100644
--- a/tests/generic/009
+++ b/tests/generic/009
@@ -50,7 +50,7 @@ testfile=$TEST_DIR/009.$$
# Disable extent zeroing for ext4 as that change where holes are created
if [ "$FSTYP" = "ext4" ]; then
- DEV=`basename $TEST_DEV`
+ DEV=`_basename_dev $TEST_DEV`
echo 0 >/sys/fs/ext4/$DEV/extent_max_zeroout_kb
fi
diff --git a/tests/generic/019 b/tests/generic/019
index 1208c49..8c37a31 100755
--- a/tests/generic/019
+++ b/tests/generic/019
@@ -41,9 +41,7 @@ _need_to_be_root
_require_scratch
_require_fail_make_request
-# TODO: Function are common enough to be moved to common/blkdev
-SCRATCH_REAL_DEV=`readlink -f $SCRATCH_DEV`
-SCRATCH_BDEV=`basename $SCRATCH_REAL_DEV`
+SCRATCH_BDEV=`_basename_dev $SCRATCH_DEV`
allow_fail_make_request()
{
diff --git a/tests/generic/285 b/tests/generic/285
index 8078b1c..8826023 100755
--- a/tests/generic/285
+++ b/tests/generic/285
@@ -48,7 +48,7 @@ BASE_TEST_FILE=$TEST_DIR/seek_sanity_testfile
# Disable extent zeroing for ext4 as that change where holes are created
if [ "$FSTYP" = "ext4" ]; then
- DEV=`basename $TEST_DEV`
+ DEV=`_basename_dev $TEST_DEV`
echo 0 >/sys/fs/ext4/$DEV/extent_max_zeroout_kb
fi
diff --git a/tests/generic/312 b/tests/generic/312
index eaec43c..a81b0df 100755
--- a/tests/generic/312
+++ b/tests/generic/312
@@ -52,7 +52,7 @@ _require_scratch
# 5G in byte
fssize=$((2**30 * 5))
required_blocks=$(($fssize / 1024))
-dev_blocks=$(grep $(basename $(readlink -f $SCRATCH_DEV)) /proc/partitions | $AWK_PROG '{print $3}')
+dev_blocks=$(grep $(_basename_dev $SCRATCH_DEV) /proc/partitions | $AWK_PROG '{print $3}')
if [ $required_blocks -gt $dev_blocks ];then
_notrun "this test requires \$SCRATCH_DEV has ${fssize}B space"
fi
--
1.9.0
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next reply other threads:[~2014-04-22 3:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-22 3:27 Eryu Guan [this message]
2014-04-22 5:10 ` [PATCH] common: new function to get real device path name and basename Dave Chinner
2014-04-22 6:57 ` [PATCH v2] " Eryu Guan
2014-04-25 6:30 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398137247-4883-1-git-send-email-eguan@redhat.com \
--to=eguan@redhat.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).