From: Dave Chinner <david@fromorbit.com>
To: xfs@oss.sgi.com
Subject: [PATCH 8/8] xfs: add initial DAX support
Date: Fri, 29 May 2015 09:45:55 +1000 [thread overview]
Message-ID: <1432856755-7859-9-git-send-email-david@fromorbit.com> (raw)
In-Reply-To: <1432856755-7859-1-git-send-email-david@fromorbit.com>
From: Dave Chinner <dchinner@redhat.com>
Add initial DAX support to XFS. To do this we need a new mount
option to turn DAX on filesystem, and we need to propagate this into
the inode flags whenever an inode is instantiated so that the
per-inode checks throughout the code Do The Right Thing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
---
fs/xfs/xfs_iops.c | 24 ++++++++++++------------
fs/xfs/xfs_mount.h | 2 ++
fs/xfs/xfs_super.c | 25 +++++++++++++++++++++++--
3 files changed, 37 insertions(+), 14 deletions(-)
diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c
index 0994f95..3e8d32d 100644
--- a/fs/xfs/xfs_iops.c
+++ b/fs/xfs/xfs_iops.c
@@ -1195,22 +1195,22 @@ xfs_diflags_to_iflags(
struct inode *inode,
struct xfs_inode *ip)
{
- if (ip->i_d.di_flags & XFS_DIFLAG_IMMUTABLE)
+ uint16_t flags = ip->i_d.di_flags;
+
+ inode->i_flags &= ~(S_IMMUTABLE | S_APPEND | S_SYNC |
+ S_NOATIME | S_DAX);
+
+ if (flags & XFS_DIFLAG_IMMUTABLE)
inode->i_flags |= S_IMMUTABLE;
- else
- inode->i_flags &= ~S_IMMUTABLE;
- if (ip->i_d.di_flags & XFS_DIFLAG_APPEND)
+ if (flags & XFS_DIFLAG_APPEND)
inode->i_flags |= S_APPEND;
- else
- inode->i_flags &= ~S_APPEND;
- if (ip->i_d.di_flags & XFS_DIFLAG_SYNC)
+ if (flags & XFS_DIFLAG_SYNC)
inode->i_flags |= S_SYNC;
- else
- inode->i_flags &= ~S_SYNC;
- if (ip->i_d.di_flags & XFS_DIFLAG_NOATIME)
+ if (flags & XFS_DIFLAG_NOATIME)
inode->i_flags |= S_NOATIME;
- else
- inode->i_flags &= ~S_NOATIME;
+ /* XXX: Also needs an on-disk per inode flag! */
+ if (ip->i_mount->m_flags & XFS_MOUNT_DAX)
+ inode->i_flags |= S_DAX;
}
/*
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index df209c2..7999e91 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -181,6 +181,8 @@ typedef struct xfs_mount {
allocator */
#define XFS_MOUNT_NOATTR2 (1ULL << 25) /* disable use of attr2 format */
+#define XFS_MOUNT_DAX (1ULL << 62) /* TEST ONLY! */
+
/*
* Default minimum read and write sizes.
diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index 858e1e6..1fb16562 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -112,6 +112,8 @@ static struct xfs_kobj xfs_dbg_kobj; /* global debug sysfs attrs */
#define MNTOPT_DISCARD "discard" /* Discard unused blocks */
#define MNTOPT_NODISCARD "nodiscard" /* Do not discard unused blocks */
+#define MNTOPT_DAX "dax" /* Enable direct access to bdev pages */
+
/*
* Table driven mount option parser.
*
@@ -363,6 +365,10 @@ xfs_parseargs(
mp->m_flags |= XFS_MOUNT_DISCARD;
} else if (!strcmp(this_char, MNTOPT_NODISCARD)) {
mp->m_flags &= ~XFS_MOUNT_DISCARD;
+#ifdef CONFIG_FS_DAX
+ } else if (!strcmp(this_char, MNTOPT_DAX)) {
+ mp->m_flags |= XFS_MOUNT_DAX;
+#endif
} else {
xfs_warn(mp, "unknown mount option [%s].", this_char);
return -EINVAL;
@@ -452,8 +458,8 @@ done:
}
struct proc_xfs_info {
- int flag;
- char *str;
+ uint64_t flag;
+ char *str;
};
STATIC int
@@ -474,6 +480,7 @@ xfs_showargs(
{ XFS_MOUNT_GRPID, "," MNTOPT_GRPID },
{ XFS_MOUNT_DISCARD, "," MNTOPT_DISCARD },
{ XFS_MOUNT_SMALL_INUMS, "," MNTOPT_32BITINODE },
+ { XFS_MOUNT_DAX, "," MNTOPT_DAX },
{ 0, NULL }
};
static struct proc_xfs_info xfs_info_unset[] = {
@@ -1507,6 +1514,20 @@ xfs_fs_fill_super(
if (XFS_SB_VERSION_NUM(&mp->m_sb) == XFS_SB_VERSION_5)
sb->s_flags |= MS_I_VERSION;
+ if (mp->m_flags & XFS_MOUNT_DAX) {
+ xfs_warn(mp,
+ "DAX enabled. Warning: EXPERIMENTAL, use at your own risk");
+ if (sb->s_blocksize != PAGE_SIZE) {
+ xfs_alert(mp,
+ "Filesystem block size invalid for DAX Turning DAX off.");
+ mp->m_flags &= ~XFS_MOUNT_DAX;
+ } else if (!sb->s_bdev->bd_disk->fops->direct_access) {
+ xfs_alert(mp,
+ "Block device does not support DAX Turning DAX off.");
+ mp->m_flags &= ~XFS_MOUNT_DAX;
+ }
+ }
+
error = xfs_mountfs(mp);
if (error)
goto out_filestream_unmount;
--
2.0.0
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2015-05-28 23:46 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-28 23:45 [PATCH 0/8 v3] xfs: DAX support Dave Chinner
2015-05-28 23:45 ` [PATCH 1/8] xfs: mmap lock needs to be inside freeze protection Dave Chinner
2015-05-28 23:45 ` [PATCH 2/8] dax: don't abuse get_block mapping for endio callbacks Dave Chinner
2015-05-28 23:45 ` [PATCH 3/8] dax: expose __dax_fault for filesystems with locking constraints Dave Chinner
2015-05-28 23:45 ` [PATCH 4/8] xfs: add DAX file operations support Dave Chinner
2015-06-02 16:02 ` Brian Foster
2015-05-28 23:45 ` [PATCH 5/8] xfs: add DAX block zeroing support Dave Chinner
2015-06-02 16:02 ` Brian Foster
2015-06-02 20:12 ` [PATCH 5/8 v2] " Dave Chinner
2015-06-02 20:47 ` Brian Foster
2015-05-28 23:45 ` [PATCH 6/8] xfs: add DAX truncate support Dave Chinner
2015-05-28 23:45 ` [PATCH 7/8] xfs: add DAX IO path support Dave Chinner
2015-05-28 23:45 ` Dave Chinner [this message]
-- strict thread matches above, loose matches on Subject: below --
2015-03-24 10:50 [PATCH 0/8 v2] xfs: DAX support Dave Chinner
2015-03-24 10:51 ` [PATCH 8/8] xfs: add initial " Dave Chinner
2015-03-24 12:52 ` Boaz Harrosh
2015-03-24 21:25 ` Dave Chinner
2015-03-25 9:14 ` Boaz Harrosh
2015-04-06 19:00 ` Brian Foster
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432856755-7859-9-git-send-email-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox