From: Brian Foster <bfoster@redhat.com>
To: xfs@oss.sgi.com
Subject: [PATCH 06/28] xfs: sparse inode chunks feature helpers and mount requirements
Date: Tue, 2 Jun 2015 14:41:39 -0400 [thread overview]
Message-ID: <1433270521-62026-7-git-send-email-bfoster@redhat.com> (raw)
In-Reply-To: <1433270521-62026-1-git-send-email-bfoster@redhat.com>
The sparse inode chunks feature uses the helper function to enable the
allocation of sparse inode chunks. The incompatible feature bit is set
on disk at mkfs time to prevent mount from unsupported kernels.
Also, enforce the inode alignment requirements required for sparse inode
chunks at mount time. When enabled, full inode chunks (and all inode
record) alignment is increased from cluster size to inode chunk size.
Sparse inode alignment must match the cluster size of the fs. Both
superblock alignment fields are set as such by mkfs when sparse inode
support is enabled.
Finally, warn that sparse inode chunks is an experimental feature until
further notice.
[xfsprogs:
Dropped the experimental feature warning to reduce userspace noise and
facilitate testing.]
Signed-off-by: Brian Foster <bfoster@redhat.com>
---
libxfs/xfs_format.h | 7 +++++++
libxfs/xfs_sb.c | 18 ++++++++++++++++++
2 files changed, 25 insertions(+)
diff --git a/libxfs/xfs_format.h b/libxfs/xfs_format.h
index 20acbc4..f5b3499 100644
--- a/libxfs/xfs_format.h
+++ b/libxfs/xfs_format.h
@@ -457,6 +457,7 @@ xfs_sb_has_ro_compat_feature(
}
#define XFS_SB_FEAT_INCOMPAT_FTYPE (1 << 0) /* filetype in dirent */
+#define XFS_SB_FEAT_INCOMPAT_SPINODES (1 << 1) /* sparse inode chunks */
#define XFS_SB_FEAT_INCOMPAT_ALL \
(XFS_SB_FEAT_INCOMPAT_FTYPE)
@@ -506,6 +507,12 @@ static inline int xfs_sb_version_hasfinobt(xfs_sb_t *sbp)
(sbp->sb_features_ro_compat & XFS_SB_FEAT_RO_COMPAT_FINOBT);
}
+static inline bool xfs_sb_version_hassparseinodes(struct xfs_sb *sbp)
+{
+ return XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_5 &&
+ xfs_sb_has_incompat_feature(sbp, XFS_SB_FEAT_INCOMPAT_SPINODES);
+}
+
/*
* end of superblock version macros
*/
diff --git a/libxfs/xfs_sb.c b/libxfs/xfs_sb.c
index fe16e8f..d528a3f 100644
--- a/libxfs/xfs_sb.c
+++ b/libxfs/xfs_sb.c
@@ -172,6 +172,24 @@ xfs_mount_validate_sb(
return -EFSCORRUPTED;
}
+ /*
+ * Full inode chunks must be aligned to inode chunk size when
+ * sparse inodes are enabled to support the sparse chunk
+ * allocation algorithm and prevent overlapping inode records.
+ */
+ if (xfs_sb_version_hassparseinodes(sbp)) {
+ uint32_t align;
+
+ align = XFS_INODES_PER_CHUNK * sbp->sb_inodesize
+ >> sbp->sb_blocklog;
+ if (sbp->sb_inoalignmt != align) {
+ xfs_warn(mp,
+"Inode block alignment (%u) must match chunk size (%u) for sparse inodes.",
+ sbp->sb_inoalignmt, align);
+ return -EINVAL;
+ }
+ }
+
if (unlikely(
sbp->sb_logstart == 0 && mp->m_logdev_targp == mp->m_ddev_targp)) {
xfs_warn(mp,
--
1.9.3
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2015-06-02 18:42 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-02 18:41 [PATCH 00/28] xfsprogs: sparse inode chunks Brian Foster
2015-06-02 18:41 ` [PATCH 01/28] xfs: create individual inode alloc. helper Brian Foster
2015-06-02 18:41 ` [PATCH 02/28] xfs: update free inode record logic to support sparse inode records Brian Foster
2015-06-02 18:41 ` [PATCH 03/28] xfs: support min/max agbno args in block allocator Brian Foster
2015-06-02 18:41 ` [PATCH 04/28] xfs: add sparse inode chunk alignment superblock field Brian Foster
2015-06-02 18:41 ` [PATCH 05/28] xfs: use sparse chunk alignment for min. inode allocation requirement Brian Foster
2015-06-02 18:41 ` Brian Foster [this message]
2015-06-02 18:41 ` [PATCH 07/28] xfs: add fs geometry bit for sparse inode chunks Brian Foster
2015-06-02 18:41 ` [PATCH 08/28] xfs: introduce inode record hole mask " Brian Foster
2015-06-02 18:41 ` [PATCH 09/28] xfs: pass inode count through ordered icreate log item Brian Foster
2015-06-02 18:41 ` [PATCH 10/28] xfs: enable sparse inode chunks for v5 superblocks Brian Foster
2015-06-02 18:41 ` [PATCH 11/28] mkfs: sparse inode chunk support Brian Foster
2015-06-02 18:41 ` [PATCH 12/28] db: support sparse inode chunk inobt record and sb fields Brian Foster
2015-06-02 18:41 ` [PATCH 13/28] db: show sparse inodes feature state in version command output Brian Foster
2015-06-02 18:41 ` [PATCH 14/28] growfs: display sparse inode status from xfs_info Brian Foster
2015-06-02 18:41 ` [PATCH 15/28] repair: handle sparse format inobt record freecount correctly Brian Foster
2015-06-05 0:53 ` Dave Chinner
2015-06-02 18:41 ` [PATCH 16/28] repair: remove duplicate field from aghdr_cnts Brian Foster
2015-06-02 18:41 ` [PATCH 17/28] repair: use ir_count for filesystems with sparse inode support Brian Foster
2015-06-02 18:41 ` [PATCH 18/28] repair: scan and track sparse inode chunks correctly Brian Foster
2015-06-05 0:56 ` Dave Chinner
2015-06-02 18:41 ` [PATCH 19/28] repair: scan sparse finobt records correctly Brian Foster
2015-06-05 1:03 ` Dave Chinner
2015-06-05 16:52 ` Brian Foster
2015-06-02 18:41 ` [PATCH 20/28] repair: validate ir_count field for sparse format records Brian Foster
2015-06-02 18:41 ` [PATCH 21/28] repair: process sparse inode records correctly Brian Foster
2015-06-05 1:12 ` Dave Chinner
2015-06-02 18:41 ` [PATCH 22/28] repair: factor out sparse inodes from finobt reconstruction Brian Foster
2015-06-02 18:41 ` [PATCH 23/28] repair: do not account sparse inodes in phase 5 cursor init Brian Foster
2015-06-02 18:41 ` [PATCH 24/28] repair: reconstruct sparse inode records correctly on disk Brian Foster
2015-06-02 18:41 ` [PATCH 25/28] repair: do not prefetch holes in sparse inode chunks Brian Foster
2015-06-02 18:41 ` [PATCH 26/28] repair: handle sparse inode alignment Brian Foster
2015-06-02 18:42 ` [PATCH 27/28] metadump: reorder inode record sanity checks and inode buffer read Brian Foster
2015-06-02 18:42 ` [PATCH 28/28] metadump: support sparse inode records Brian Foster
2015-06-16 0:33 ` [PATCH 00/28] xfsprogs: sparse inode chunks Dave Chinner
2015-06-16 0:39 ` Dave Chinner
2015-06-16 10:55 ` Brian Foster
2015-06-16 20:26 ` Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433270521-62026-7-git-send-email-bfoster@redhat.com \
--to=bfoster@redhat.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox