From: Brian Foster <bfoster@redhat.com>
To: xfs@oss.sgi.com
Subject: [PATCH v3 17/18] xfs_copy: refactor log format code into new helper
Date: Fri, 2 Oct 2015 14:19:54 -0400 [thread overview]
Message-ID: <1443809995-20395-18-git-send-email-bfoster@redhat.com> (raw)
In-Reply-To: <1443809995-20395-1-git-send-email-bfoster@redhat.com>
The xfs_copy log format code is mostly open-coded into the main()
function of the application. Support for v5 superblock log formatting
will require an alternate mechanism than that utilized for v4
superblocks and older.
As such, refactor the log formatting code into new helper functions. The
top-level helper iterates the copy target devices and another helper
implements the log format magic. This patch does not change existing
behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
---
copy/xfs_copy.c | 69 +++++++++++++++++++++++++++++++++++++--------------------
1 file changed, 45 insertions(+), 24 deletions(-)
diff --git a/copy/xfs_copy.c b/copy/xfs_copy.c
index e03796a..a5f25ad 100644
--- a/copy/xfs_copy.c
+++ b/copy/xfs_copy.c
@@ -62,8 +62,9 @@ pthread_mutex_t mainwait;
#define ACTIVE 1
#define INACTIVE 2
-xfs_off_t write_log_trailer(int fd, wbuf *w, xfs_mount_t *mp);
-xfs_off_t write_log_header(int fd, wbuf *w, xfs_mount_t *mp);
+xfs_off_t write_log_trailer(int fd, wbuf *w, xfs_mount_t *mp);
+xfs_off_t write_log_header(int fd, wbuf *w, xfs_mount_t *mp);
+static void format_logs(struct xfs_mount *);
/* general purpose message reporting routine */
@@ -518,7 +519,7 @@ main(int argc, char **argv)
int i, j;
int howfar = 0;
int open_flags;
- xfs_off_t pos, end_pos;
+ xfs_off_t pos;
size_t length;
int c;
__uint64_t size, sizeb;
@@ -1160,29 +1161,11 @@ main(int argc, char **argv)
}
if (kids > 0) {
- if (!duplicate) {
-
+ if (!duplicate)
/* write a clean log using the specified UUID */
- for (j = 0, tcarg = targ; j < num_targets; j++) {
- w_buf.owner = tcarg;
- w_buf.length = rounddown(w_buf.size,
- w_buf.min_io_size);
- pos = write_log_header(
- source_fd, &w_buf, mp);
- end_pos = write_log_trailer(
- source_fd, &w_buf, mp);
- w_buf.position = pos;
- memset(w_buf.data, 0, w_buf.length);
-
- while (w_buf.position < end_pos) {
- do_write(tcarg, NULL);
- w_buf.position += w_buf.length;
- }
- tcarg++;
- }
- } else {
+ format_logs(mp);
+ else
num_ags = 1;
- }
/* reread and rewrite superblocks (UUID and in-progress) */
/* [backwards, so inprogress bit only updated when done] */
@@ -1284,3 +1267,41 @@ write_log_trailer(int fd, wbuf *buf, xfs_mount_t *mp)
return buf->position;
}
+
+/*
+ * Clear a log by writing a record at the head, the tail and zeroing everything
+ * in between.
+ */
+static void
+clear_log(
+ struct xfs_mount *mp,
+ thread_args *tcarg)
+{
+ xfs_off_t pos;
+ xfs_off_t end_pos;
+
+ w_buf.owner = tcarg;
+ w_buf.length = rounddown(w_buf.size, w_buf.min_io_size);
+ pos = write_log_header(source_fd, &w_buf, mp);
+ end_pos = write_log_trailer(source_fd, &w_buf, mp);
+ w_buf.position = pos;
+ memset(w_buf.data, 0, w_buf.length);
+
+ while (w_buf.position < end_pos) {
+ do_write(tcarg, NULL);
+ w_buf.position += w_buf.length;
+ }
+}
+
+static void
+format_logs(
+ struct xfs_mount *mp)
+{
+ thread_args *tcarg;
+ int i;
+
+ for (i = 0, tcarg = targ; i < num_targets; i++) {
+ clear_log(mp, tcarg);
+ tcarg++;
+ }
+}
--
2.1.0
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2015-10-02 18:20 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-02 18:19 [PATCH v3 00/18] xfsprogs: format the log correctly on v5 supers Brian Foster
2015-10-02 18:19 ` [PATCH v3 01/18] libxfs: validate metadata LSNs against log on v5 superblocks Brian Foster
2015-10-02 18:19 ` [PATCH v3 02/18] libxfs: track largest metadata LSN in use via verifiers Brian Foster
2015-10-02 18:19 ` [PATCH v3 03/18] libxfs: don't hardcode cycle 1 into unmount op header Brian Foster
2015-10-02 18:19 ` [PATCH v3 04/18] libxfs: pass lsn param to log clear and record header logging helpers Brian Foster
2015-10-02 18:19 ` [PATCH v3 05/18] libxfs: add ability to clear log to arbitrary log cycle Brian Foster
2015-10-02 18:19 ` [PATCH v3 06/18] libxlog: pull struct xlog out of xlog_is_dirty() Brian Foster
2015-10-02 18:19 ` [PATCH v3 07/18] xfs_repair: track log state throughout all recovery phases Brian Foster
2015-10-02 18:19 ` [PATCH v3 08/18] xfs_repair: process the log in no_modify mode Brian Foster
2015-10-02 18:19 ` [PATCH v3 09/18] xfs_repair: format the log with forward cycle number on v5 supers Brian Foster
2015-10-02 18:19 ` [PATCH v3 10/18] xfs_repair: don't clear the log by default Brian Foster
2015-10-02 18:19 ` [PATCH v3 11/18] xfs_repair: seed the max lsn from log state in phase 2 Brian Foster
2015-10-02 18:19 ` [PATCH v3 12/18] xfs_db: do not reset current lsn from uuid command on v5 supers Brian Foster
2015-10-02 18:19 ` [PATCH v3 13/18] db/metadump: bump lsn when log is cleared " Brian Foster
2015-10-02 18:19 ` [PATCH v3 14/18] xfs_copy: check for dirty log on non-duplicate copies Brian Foster
2015-10-02 18:19 ` [PATCH v3 15/18] xfs_copy: genericize write helper to facilitate separate log buf Brian Foster
2015-10-02 18:19 ` [PATCH v3 16/18] xfs_copy: store data buf alignment in buf data structure Brian Foster
2015-10-02 18:19 ` Brian Foster [this message]
2015-10-02 18:19 ` [PATCH v3 18/18] xfs_copy: format v5 sb logs correctly Brian Foster
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443809995-20395-18-git-send-email-bfoster@redhat.com \
--to=bfoster@redhat.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox