linux-xfs.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: stable@vger.kernel.org
Cc: linux-xfs@vger.kernel.org, Brian Foster <bfoster@redhat.com>,
	Dave Chinner <david@fromorbit.com>
Subject: [PATCH 16/32] xfs: pass post-eof speculative prealloc blocks to bmapi
Date: Mon,  9 Jan 2017 16:38:47 +0100	[thread overview]
Message-ID: <1483976343-661-17-git-send-email-hch@lst.de> (raw)
In-Reply-To: <1483976343-661-1-git-send-email-hch@lst.de>

From: Brian Foster <bfoster@redhat.com>

commit f782088c9e5d08e9494c63e68b4e85716df3e5f8 upstream.

xfs_file_iomap_begin_delay() implements post-eof speculative
preallocation by extending the block count of the requested delayed
allocation. Now that xfs_bmapi_reserve_delalloc() has been updated to
handle prealloc blocks separately and tag the inode, update
xfs_file_iomap_begin_delay() to use the new parameter and rely on the
former to tag the inode.

Note that this patch does not change behavior.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
---
 fs/xfs/xfs_iomap.c | 33 +++++++++++++--------------------
 1 file changed, 13 insertions(+), 20 deletions(-)

diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index e4bfde2..15a83813 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -536,10 +536,11 @@ xfs_file_iomap_begin_delay(
 	xfs_fileoff_t		offset_fsb = XFS_B_TO_FSBT(mp, offset);
 	xfs_fileoff_t		maxbytes_fsb =
 		XFS_B_TO_FSB(mp, mp->m_super->s_maxbytes);
-	xfs_fileoff_t		end_fsb, orig_end_fsb;
+	xfs_fileoff_t		end_fsb;
 	int			error = 0, eof = 0;
 	struct xfs_bmbt_irec	got;
 	xfs_extnum_t		idx;
+	xfs_fsblock_t		prealloc_blocks = 0;
 
 	ASSERT(!XFS_IS_REALTIME_INODE(ip));
 	ASSERT(!xfs_get_extsz_hint(ip));
@@ -594,33 +595,32 @@ xfs_file_iomap_begin_delay(
 	 * the lower level functions are updated.
 	 */
 	count = min_t(loff_t, count, 1024 * PAGE_SIZE);
-	end_fsb = orig_end_fsb =
-		min(XFS_B_TO_FSB(mp, offset + count), maxbytes_fsb);
+	end_fsb = min(XFS_B_TO_FSB(mp, offset + count), maxbytes_fsb);
 
 	if (eof) {
-		xfs_fsblock_t	prealloc_blocks;
-
 		prealloc_blocks = xfs_iomap_prealloc_size(ip, offset, count, idx);
 		if (prealloc_blocks) {
 			xfs_extlen_t	align;
 			xfs_off_t	end_offset;
+			xfs_fileoff_t	p_end_fsb;
 
 			end_offset = XFS_WRITEIO_ALIGN(mp, offset + count - 1);
-			end_fsb = XFS_B_TO_FSBT(mp, end_offset) +
-				prealloc_blocks;
+			p_end_fsb = XFS_B_TO_FSBT(mp, end_offset) +
+					prealloc_blocks;
 
 			align = xfs_eof_alignment(ip, 0);
 			if (align)
-				end_fsb = roundup_64(end_fsb, align);
+				p_end_fsb = roundup_64(p_end_fsb, align);
 
-			end_fsb = min(end_fsb, maxbytes_fsb);
-			ASSERT(end_fsb > offset_fsb);
+			p_end_fsb = min(p_end_fsb, maxbytes_fsb);
+			ASSERT(p_end_fsb > offset_fsb);
+			prealloc_blocks = p_end_fsb - end_fsb;
 		}
 	}
 
 retry:
 	error = xfs_bmapi_reserve_delalloc(ip, XFS_DATA_FORK, offset_fsb,
-			end_fsb - offset_fsb, 0, &got, &idx, eof);
+			end_fsb - offset_fsb, prealloc_blocks, &got, &idx, eof);
 	switch (error) {
 	case 0:
 		break;
@@ -628,8 +628,8 @@ xfs_file_iomap_begin_delay(
 	case -EDQUOT:
 		/* retry without any preallocation */
 		trace_xfs_delalloc_enospc(ip, offset, count);
-		if (end_fsb != orig_end_fsb) {
-			end_fsb = orig_end_fsb;
+		if (prealloc_blocks) {
+			prealloc_blocks = 0;
 			goto retry;
 		}
 		/*FALLTHRU*/
@@ -637,13 +637,6 @@ xfs_file_iomap_begin_delay(
 		goto out_unlock;
 	}
 
-	/*
-	 * Tag the inode as speculatively preallocated so we can reclaim this
-	 * space on demand, if necessary.
-	 */
-	if (end_fsb != orig_end_fsb)
-		xfs_inode_set_eofblocks_tag(ip);
-
 	trace_xfs_iomap_alloc(ip, offset, count, 0, &got);
 done:
 	if (isnullstartblock(got.br_startblock))
-- 
2.1.4


  parent reply	other threads:[~2017-01-09 15:39 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-09 15:38 4.9-stable updates for XFS Christoph Hellwig
2017-01-09 15:38 ` [PATCH 01/32] xfs: don't call xfs_sb_quota_from_disk twice Christoph Hellwig
2017-01-09 15:38 ` [PATCH 02/32] xfs: check return value of _trans_reserve_quota_nblks Christoph Hellwig
2017-01-09 15:38 ` [PATCH 03/32] xfs: don't skip cow forks w/ delalloc blocks in cowblocks scan Christoph Hellwig
2017-01-09 15:38 ` [PATCH 04/32] xfs: don't BUG() on mixed direct and mapped I/O Christoph Hellwig
2017-01-09 15:38 ` [PATCH 05/32] xfs: provide helper for counting extents from if_bytes Christoph Hellwig
2017-01-09 15:38 ` [PATCH 06/32] xfs: check minimum block size for CRC filesystems Christoph Hellwig
2017-01-09 15:38 ` [PATCH 07/32] xfs: fix unbalanced inode reclaim flush locking Christoph Hellwig
2017-01-09 15:38 ` [PATCH 08/32] xfs: new inode extent list lookup helpers Christoph Hellwig
2017-01-09 15:38 ` [PATCH 09/32] xfs: factor rmap btree size into the indlen calculations Christoph Hellwig
2017-01-09 15:38 ` [PATCH 10/32] xfs: always succeed when deduping zero bytes Christoph Hellwig
2017-01-09 15:38 ` [PATCH 11/32] xfs: remove prev argument to xfs_bmapi_reserve_delalloc Christoph Hellwig
2017-01-09 15:38 ` [PATCH 12/32] xfs: track preallocation separately in xfs_bmapi_reserve_delalloc() Christoph Hellwig
2017-01-09 15:38 ` [PATCH 13/32] xfs: use new extent lookup helpers in __xfs_reflink_reserve_cow Christoph Hellwig
2017-01-09 15:38 ` [PATCH 14/32] xfs: clean up cow fork reservation and tag inodes correctly Christoph Hellwig
2017-01-09 15:38 ` [PATCH 15/32] xfs: use new extent lookup helpers xfs_file_iomap_begin_delay Christoph Hellwig
2017-01-09 15:38 ` Christoph Hellwig [this message]
2017-01-09 15:38 ` [PATCH 17/32] xfs: Move AGI buffer type setting to xfs_read_agi Christoph Hellwig
2017-01-09 15:38 ` [PATCH 18/32] xfs: pass state not whichfork to trace_xfs_extlist Christoph Hellwig
2017-01-09 15:38 ` [PATCH 19/32] xfs: handle cow fork in xfs_bmap_trace_exlist Christoph Hellwig
2017-01-09 15:38 ` [PATCH 20/32] xfs: forbid AG btrees with level == 0 Christoph Hellwig
2017-01-09 15:38 ` [PATCH 21/32] xfs: check for bogus values in btree block headers Christoph Hellwig
2017-01-09 15:38 ` [PATCH 22/32] xfs: complain if we don't get nextents bmap records Christoph Hellwig
2017-01-09 15:38 ` [PATCH 23/32] xfs: don't crash if reading a directory results in an unexpected hole Christoph Hellwig
2017-01-09 15:38 ` [PATCH 24/32] xfs: error out if trying to add attrs and anextents > 0 Christoph Hellwig
2017-01-09 15:38 ` [PATCH 25/32] xfs: don't allow di_size with high bit set Christoph Hellwig
2017-01-09 15:38 ` [PATCH 26/32] xfs: don't cap maximum dedupe request length Christoph Hellwig
2017-01-09 15:38 ` [PATCH 27/32] xfs: ignore leaf attr ichdr.count in verifier during log replay Christoph Hellwig
2017-01-09 15:38 ` [PATCH 28/32] xfs: use GPF_NOFS when allocating btree cursors Christoph Hellwig
2017-01-09 15:39 ` [PATCH 29/32] xfs: fix double-cleanup when CUI recovery fails Christoph Hellwig
2017-01-09 15:39 ` [PATCH 30/32] xfs: use the actual AG length when reserving blocks Christoph Hellwig
2017-01-09 15:39 ` [PATCH 31/32] xfs: fix crash and data corruption due to removal of busy COW extents Christoph Hellwig
2017-01-09 15:39 ` [PATCH 32/32] xfs: fix max_retries _show and _store functions Christoph Hellwig
2017-01-10  0:21 ` 4.9-stable updates for XFS Darrick J. Wong
2017-01-10 10:37 ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1483976343-661-17-git-send-email-hch@lst.de \
    --to=hch@lst.de \
    --cc=bfoster@redhat.com \
    --cc=david@fromorbit.com \
    --cc=linux-xfs@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).