From: Amir Goldstein <amir73il@gmail.com>
To: Eryu Guan <eguan@redhat.com>
Cc: Josef Bacik <jbacik@fb.com>,
"Darrick J . Wong" <darrick.wong@oracle.com>,
Christoph Hellwig <hch@lst.de>,
fstests@vger.kernel.org, linux-xfs@vger.kernel.org
Subject: [PATCH v2 12/14] replay-log: add support for replaying ops in target device sector range
Date: Wed, 30 Aug 2017 17:51:44 +0300 [thread overview]
Message-ID: <1504104706-11965-13-git-send-email-amir73il@gmail.com> (raw)
In-Reply-To: <1504104706-11965-1-git-send-email-amir73il@gmail.com>
Using command line options --start-sector and --end-sector, only
operations acting on the specified target device range will be
replayed.
Single vebbose mode (-v) prints out only replayed operations.
Double verbose mode (-vv) prints out also skipped operations.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
---
src/log-writes/log-writes.c | 33 +++++++++++++++++++++++++++++++--
src/log-writes/log-writes.h | 2 ++
src/log-writes/replay-log.c | 31 +++++++++++++++++++++++++++++++
3 files changed, 64 insertions(+), 2 deletions(-)
diff --git a/src/log-writes/log-writes.c b/src/log-writes/log-writes.c
index ba66a5c..d832c2a 100644
--- a/src/log-writes/log-writes.c
+++ b/src/log-writes/log-writes.c
@@ -119,6 +119,24 @@ int log_discard(struct log *log, struct log_write_entry *entry)
/*
* @log: the log we are replaying.
+ * @entry: entry to be replayed.
+ *
+ * @return: 0 if we should replay the entry, > 0 if we should skip it.
+ *
+ * Should we skip the entry in our log or replay onto the replay device.
+ */
+int log_should_skip(struct log *log, struct log_write_entry *entry)
+{
+ if (!entry->nr_sectors)
+ return 0;
+ if (entry->sector + entry->nr_sectors < log->start_sector ||
+ entry->sector > log->end_sector)
+ return 1;
+ return 0;
+}
+
+/*
+ * @log: the log we are replaying.
* @entry: where we put the entry.
* @read_data: read the entry data as well, entry must be log->sectorsize sized
* if this is set.
@@ -137,6 +155,7 @@ int log_replay_next_entry(struct log *log, struct log_write_entry *entry,
char *buf;
ssize_t ret;
off_t offset;
+ u64 skip = 0;
if (log->cur_entry >= log->nr_entries)
return 1;
@@ -158,9 +177,11 @@ int log_replay_next_entry(struct log *log, struct log_write_entry *entry,
}
}
- if (log_writes_verbose) {
+ skip = log_should_skip(log, entry);
+ if (log_writes_verbose > 1 || (log_writes_verbose && !skip)) {
offset = lseek(log->logfd, 0, SEEK_CUR);
- printf("replaying %d@%llu: sector %llu, size %llu, flags %llu\n",
+ printf("%s %d@%llu: sector %llu, size %llu, flags %llu\n",
+ skip ? "skipping" : "replaying",
(int)log->cur_entry - 1, offset / log->sectorsize,
(unsigned long long)le64_to_cpu(entry->sector),
(unsigned long long)size,
@@ -173,6 +194,14 @@ int log_replay_next_entry(struct log *log, struct log_write_entry *entry,
if (flags & LOG_DISCARD_FLAG)
return log_discard(log, entry);
+ if (skip) {
+ if (lseek(log->logfd, size, SEEK_CUR) == (off_t)-1) {
+ fprintf(stderr, "Error seeking in log: %d\n", errno);
+ return -1;
+ }
+ return 0;
+ }
+
buf = malloc(size);
if (!buf) {
fprintf(stderr, "Error allocating buffer %llu entry %llu\n", (unsigned long long)size, (unsigned long long)log->cur_entry - 1);
diff --git a/src/log-writes/log-writes.h b/src/log-writes/log-writes.h
index 13f98ff..fc84acf 100644
--- a/src/log-writes/log-writes.h
+++ b/src/log-writes/log-writes.h
@@ -53,6 +53,8 @@ struct log {
int replayfd;
unsigned long flags;
u64 sectorsize;
+ u64 start_sector;
+ u64 end_sector;
u64 nr_entries;
u64 cur_entry;
u64 max_zero_size;
diff --git a/src/log-writes/replay-log.c b/src/log-writes/replay-log.c
index 87c03a2..971974b 100644
--- a/src/log-writes/replay-log.c
+++ b/src/log-writes/replay-log.c
@@ -20,6 +20,8 @@ enum option_indexes {
FSCK,
CHECK,
START_MARK,
+ START_SECTOR,
+ END_SECTOR,
};
static struct option long_options[] = {
@@ -37,6 +39,8 @@ static struct option long_options[] = {
{"fsck", required_argument, NULL, 0},
{"check", required_argument, NULL, 0},
{"start-mark", required_argument, NULL, 0},
+ {"start-sector", required_argument, NULL, 0},
+ {"end-sector", required_argument, NULL, 0},
{ NULL, 0, NULL, 0 },
};
@@ -61,6 +65,12 @@ static void usage(void)
"--check\n");
fprintf(stderr, "\t--check [<number>|flush|fua] when to check the "
"file system, mush specify --fsck\n");
+ fprintf(stderr, "\t--start-sector <sector> - replay ops on region "
+ "from <sector> onto <device>\n");
+ fprintf(stderr, "\t--end-sector <sector> - replay ops on region "
+ "to <sector> onto <device>\n");
+ fprintf(stderr, "\t-v or --verbose - print replayed ops\n");
+ fprintf(stderr, "\t-vv - print also skipped ops\n");
exit(1);
}
@@ -120,6 +130,8 @@ int main(int argc, char **argv)
struct log_write_entry *entry;
u64 stop_flags = 0;
u64 start_entry = 0;
+ u64 start_sector = 0;
+ u64 end_sector = -1ULL;
u64 run_limit = 0;
u64 num_entries = 0;
u64 check_number = 0;
@@ -240,6 +252,22 @@ int main(int argc, char **argv)
tmp = NULL;
}
break;
+ case START_SECTOR:
+ start_sector = strtoull(optarg, &tmp, 0);
+ if (tmp && *tmp != '\0') {
+ fprintf(stderr, "Invalid sector number\n");
+ exit(1);
+ }
+ tmp = NULL;
+ break;
+ case END_SECTOR:
+ end_sector = strtoull(optarg, &tmp, 0);
+ if (tmp && *tmp != '\0') {
+ fprintf(stderr, "Invalid sector number\n");
+ exit(1);
+ }
+ tmp = NULL;
+ break;
default:
usage();
}
@@ -257,6 +285,9 @@ int main(int argc, char **argv)
if (!discard)
log->flags |= LOG_IGNORE_DISCARD;
+ log->start_sector = start_sector;
+ log->end_sector = end_sector;
+
entry = malloc(log->sectorsize);
if (!entry) {
fprintf(stderr, "Couldn't allocate buffer\n");
--
2.7.4
next prev parent reply other threads:[~2017-08-30 14:51 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-30 14:51 [PATCH v2 00/14] Crash consistency xfstest using dm-log-writes Amir Goldstein
2017-08-30 14:51 ` [PATCH v2 01/14] common/rc: convert some egrep to grep Amir Goldstein
2017-08-30 15:45 ` Darrick J. Wong
2017-08-30 14:51 ` [PATCH v2 02/14] common/rc: fix _require_xfs_io_command params check Amir Goldstein
2017-08-30 16:17 ` Darrick J. Wong
2017-08-30 14:51 ` [PATCH v2 03/14] fsx: fixes to random seed Amir Goldstein
2017-08-30 14:51 ` [PATCH v2 04/14] fsx: fix path of .fsx* files Amir Goldstein
2017-08-30 14:51 ` [PATCH v2 05/14] fsx: fix compile warnings Amir Goldstein
2017-08-30 14:51 ` [PATCH v2 06/14] fsx: add support for integrity check with dm-log-writes target Amir Goldstein
2017-08-30 14:51 ` [PATCH v2 07/14] fsx: add optional logid prefix to log messages Amir Goldstein
2017-09-05 10:46 ` Eryu Guan
2017-09-05 11:24 ` Amir Goldstein
2017-09-05 11:31 ` Eryu Guan
2017-09-07 7:10 ` Amir Goldstein
2017-08-30 14:51 ` [PATCH v2 08/14] fsx: add support for --record-ops Amir Goldstein
2017-08-30 14:51 ` [PATCH v2 09/14] fsx: add support for -g filldata Amir Goldstein
2017-09-05 10:50 ` Eryu Guan
2017-09-05 11:29 ` Amir Goldstein
2017-09-05 11:33 ` Eryu Guan
2017-08-30 14:51 ` [PATCH v2 10/14] log-writes: add replay-log program to replay dm-log-writes target Amir Goldstein
2017-09-05 11:03 ` Eryu Guan
2017-09-05 13:40 ` Amir Goldstein
2017-08-30 14:51 ` [PATCH v2 11/14] replay-log: output log replay offset in verbose mode Amir Goldstein
2017-08-30 14:51 ` Amir Goldstein [this message]
2017-09-05 11:07 ` [PATCH v2 12/14] replay-log: add support for replaying ops in target device sector range Eryu Guan
2017-09-05 11:41 ` Amir Goldstein
2017-08-30 14:51 ` [PATCH v2 13/14] fstests: add support for working with dm-log-writes target Amir Goldstein
2017-09-05 11:22 ` Eryu Guan
2017-09-05 15:15 ` Amir Goldstein
2017-08-30 14:51 ` [PATCH v2 14/14] fstests: add crash consistency fsx test using dm-log-writes Amir Goldstein
2017-09-05 11:28 ` Eryu Guan
2017-09-05 11:52 ` Amir Goldstein
2017-08-30 15:04 ` [PATCH v2 00/14] Crash consistency xfstest " Amir Goldstein
2017-08-30 15:23 ` Josef Bacik
2017-08-30 18:39 ` Amir Goldstein
2017-08-30 18:55 ` Josef Bacik
2017-08-30 19:43 ` Amir Goldstein
2017-08-31 3:38 ` Eryu Guan
2017-09-01 7:29 ` Amir Goldstein
2017-09-01 7:45 ` Eryu Guan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1504104706-11965-13-git-send-email-amir73il@gmail.com \
--to=amir73il@gmail.com \
--cc=darrick.wong@oracle.com \
--cc=eguan@redhat.com \
--cc=fstests@vger.kernel.org \
--cc=hch@lst.de \
--cc=jbacik@fb.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).