From: Ian Kent <raven@themaw.net>
To: linux-xfs <linux-xfs@vger.kernel.org>
Cc: David Howells <dhowells@redhat.com>,
Dave Chinner <dchinner@redhat.com>,
Al Viro <viro@ZenIV.linux.org.uk>,
Eric Sandeen <sandeen@sandeen.net>
Subject: [REPOST PATCH v3 06/16] xfs: mount-api - make xfs_parse_param() take context .parse_param() args
Date: Tue, 24 Sep 2019 21:22:33 +0800 [thread overview]
Message-ID: <156933135322.20933.2166438700224340142.stgit@fedora-28> (raw)
In-Reply-To: <156933112949.20933.12761540130806431294.stgit@fedora-28>
Make xfs_parse_param() take arguments of the fs context operation
.parse_param() in preparation for switching to use the file system
mount context for mount.
The function fc_parse() only uses the file system context (fc here)
when calling log macros warnf() and invalf() which in turn check
only the fc->log field to determine if the message should be saved
to a context buffer (for later retrival by userspace) or logged
using printk().
Also the temporary function match_kstrtoint() is now unused, remove it.
Signed-off-by: Ian Kent <raven@themaw.net>
---
fs/xfs/xfs_super.c | 137 +++++++++++++++++++++++++++++++---------------------
1 file changed, 81 insertions(+), 56 deletions(-)
diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index b04aebab69ab..6792d46fa0be 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -191,57 +191,60 @@ suffix_kstrtoint(const char *s, unsigned int base, int *res)
return ret;
}
-STATIC int
-match_kstrtoint(const substring_t *s, unsigned int base, int *res)
-{
- const char *value;
- int ret;
-
- value = match_strdup(s);
- if (!value)
- return -ENOMEM;
- ret = suffix_kstrtoint(value, base, res);
- kfree(value);
- return ret;
-}
+struct xfs_fs_context {
+ int dsunit;
+ int dswidth;
+ uint8_t iosizelog;
+};
STATIC int
xfs_parse_param(
- int token,
- char *p,
- substring_t *args,
- struct xfs_mount *mp,
- int *dsunit,
- int *dswidth,
- uint8_t *iosizelog)
+ struct fs_context *fc,
+ struct fs_parameter *param)
{
+ struct xfs_fs_context *ctx = fc->fs_private;
+ struct xfs_mount *mp = fc->s_fs_info;
+ struct fs_parse_result result;
int iosize = 0;
+ int opt;
- switch (token) {
+ opt = fs_parse(fc, &xfs_fs_parameters, param, &result);
+ if (opt < 0) {
+ /*
+ * If fs_parse() returns -ENOPARAM and the parameter
+ * is "source" the VFS needs to handle this option
+ * in order to boot otherwise use the default case
+ * below to handle invalid options.
+ */
+ if (opt != -ENOPARAM ||
+ strcmp(param->key, "source") == 0)
+ return opt;
+ }
+
+ switch (opt) {
case Opt_logbufs:
- if (match_int(args, &mp->m_logbufs))
- return -EINVAL;
+ mp->m_logbufs = result.uint_32;
break;
case Opt_logbsize:
- if (match_kstrtoint(args, 10, &mp->m_logbsize))
+ if (suffix_kstrtoint(param->string, 10, &mp->m_logbsize))
return -EINVAL;
break;
case Opt_logdev:
kfree(mp->m_logname);
- mp->m_logname = match_strdup(args);
+ mp->m_logname = kstrdup(param->string, GFP_KERNEL);
if (!mp->m_logname)
return -ENOMEM;
break;
case Opt_rtdev:
kfree(mp->m_rtname);
- mp->m_rtname = match_strdup(args);
+ mp->m_rtname = kstrdup(param->string, GFP_KERNEL);
if (!mp->m_rtname)
return -ENOMEM;
break;
case Opt_allocsize:
- if (match_kstrtoint(args, 10, &iosize))
+ if (suffix_kstrtoint(param->string, 10, &iosize))
return -EINVAL;
- *iosizelog = ffs(iosize) - 1;
+ ctx->iosizelog = ffs(iosize) - 1;
break;
case Opt_grpid:
case Opt_bsdgroups:
@@ -264,12 +267,10 @@ xfs_parse_param(
mp->m_flags |= XFS_MOUNT_SWALLOC;
break;
case Opt_sunit:
- if (match_int(args, dsunit))
- return -EINVAL;
+ ctx->dsunit = result.uint_32;
break;
case Opt_swidth:
- if (match_int(args, dswidth))
- return -EINVAL;
+ ctx->dswidth = result.uint_32;
break;
case Opt_inode32:
mp->m_flags |= XFS_MOUNT_SMALL_INUMS;
@@ -348,7 +349,7 @@ xfs_parse_param(
break;
#endif
default:
- xfs_warn(mp, "unknown mount option [%s].", p);
+ xfs_warn(mp, "unknown mount option [%s].", param->key);
return -EINVAL;
}
@@ -373,10 +374,16 @@ xfs_parseargs(
{
const struct super_block *sb = mp->m_super;
char *p;
- substring_t args[MAX_OPT_ARGS];
- int dsunit = 0;
- int dswidth = 0;
- uint8_t iosizelog = 0;
+ struct fs_context fc;
+ struct xfs_fs_context context;
+ struct xfs_fs_context *ctx;
+ int ret;
+
+ memset(&fc, 0, sizeof(fc));
+ memset(&context, 0, sizeof(context));
+ fc.fs_private = &context;
+ ctx = &context;
+ fc.s_fs_info = mp;
/*
* set up the mount name first so all the errors will refer to the
@@ -413,16 +420,33 @@ xfs_parseargs(
goto done;
while ((p = strsep(&options, ",")) != NULL) {
- int token;
- int ret;
+ struct fs_parameter param;
+ char *value;
if (!*p)
continue;
- token = match_token(p, tokens, args);
- ret = xfs_parse_param(token, p, args, mp,
- &dsunit, &dswidth, &iosizelog);
- if (ret)
+ param.key = p;
+ param.type = fs_value_is_string;
+ param.string = NULL;
+ param.size = 0;
+
+ value = strchr(p, '=');
+ if (value) {
+ *value++ = 0;
+ param.size = strlen(value);
+ if (param.size > 0) {
+ param.string = kmemdup_nul(value,
+ param.size,
+ GFP_KERNEL);
+ if (!param.string)
+ return -ENOMEM;
+ }
+ }
+
+ ret = xfs_parse_param(&fc, ¶m);
+ kfree(param.string);
+ if (ret < 0)
return ret;
}
@@ -435,7 +459,8 @@ xfs_parseargs(
return -EINVAL;
}
- if ((mp->m_flags & XFS_MOUNT_NOALIGN) && (dsunit || dswidth)) {
+ if ((mp->m_flags & XFS_MOUNT_NOALIGN) &&
+ (ctx->dsunit || ctx->dswidth)) {
xfs_warn(mp,
"sunit and swidth options incompatible with the noalign option");
return -EINVAL;
@@ -448,28 +473,28 @@ xfs_parseargs(
}
#endif
- if ((dsunit && !dswidth) || (!dsunit && dswidth)) {
+ if ((ctx->dsunit && !ctx->dswidth) || (!ctx->dsunit && ctx->dswidth)) {
xfs_warn(mp, "sunit and swidth must be specified together");
return -EINVAL;
}
- if (dsunit && (dswidth % dsunit != 0)) {
+ if (ctx->dsunit && (ctx->dswidth % ctx->dsunit != 0)) {
xfs_warn(mp,
"stripe width (%d) must be a multiple of the stripe unit (%d)",
- dswidth, dsunit);
+ ctx->dswidth, ctx->dsunit);
return -EINVAL;
}
done:
- if (dsunit && !(mp->m_flags & XFS_MOUNT_NOALIGN)) {
+ if (ctx->dsunit && !(mp->m_flags & XFS_MOUNT_NOALIGN)) {
/*
* At this point the superblock has not been read
* in, therefore we do not know the block size.
* Before the mount call ends we will convert
* these to FSBs.
*/
- mp->m_dalign = dsunit;
- mp->m_swidth = dswidth;
+ mp->m_dalign = ctx->dsunit;
+ mp->m_swidth = ctx->dswidth;
}
if (mp->m_logbufs != -1 &&
@@ -491,18 +516,18 @@ xfs_parseargs(
return -EINVAL;
}
- if (iosizelog) {
- if (iosizelog > XFS_MAX_IO_LOG ||
- iosizelog < XFS_MIN_IO_LOG) {
+ if (ctx->iosizelog) {
+ if (ctx->iosizelog > XFS_MAX_IO_LOG ||
+ ctx->iosizelog < XFS_MIN_IO_LOG) {
xfs_warn(mp, "invalid log iosize: %d [not %d-%d]",
- iosizelog, XFS_MIN_IO_LOG,
+ ctx->iosizelog, XFS_MIN_IO_LOG,
XFS_MAX_IO_LOG);
return -EINVAL;
}
mp->m_flags |= XFS_MOUNT_DFLT_IOSIZE;
- mp->m_readio_log = iosizelog;
- mp->m_writeio_log = iosizelog;
+ mp->m_readio_log = ctx->iosizelog;
+ mp->m_writeio_log = ctx->iosizelog;
}
return 0;
next prev parent reply other threads:[~2019-09-24 13:22 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-24 13:21 [REPOST PATCH v3 00/16] xfs: mount API patch series Ian Kent
2019-09-24 13:22 ` [REPOST PATCH v3 01/16] vfs: Create fs_context-aware mount_bdev() replacement Ian Kent
2019-09-24 21:33 ` Al Viro
2019-09-25 5:15 ` Ian Kent
2019-09-24 13:22 ` [REPOST PATCH v3 02/16] xfs: remove very old mount option Ian Kent
2019-09-24 13:22 ` [REPOST PATCH v3 03/16] xfs: mount-api - add fs parameter description Ian Kent
2019-09-24 13:22 ` [REPOST PATCH v3 04/16] xfs: mount-api - refactor suffix_kstrtoint() Ian Kent
2019-09-24 13:22 ` [REPOST PATCH v3 05/16] xfs: mount-api - refactor xfs_parseags() Ian Kent
2019-09-24 13:22 ` Ian Kent [this message]
2019-09-24 14:37 ` [REPOST PATCH v3 06/16] xfs: mount-api - make xfs_parse_param() take context .parse_param() args Brian Foster
2019-09-25 0:20 ` Ian Kent
2019-09-25 14:33 ` Brian Foster
2019-09-26 2:57 ` Ian Kent
2019-09-26 3:32 ` Al Viro
2019-09-26 4:22 ` Ian Kent
2019-09-26 4:14 ` Al Viro
2019-09-26 7:06 ` Ian Kent
2019-09-26 7:34 ` Ian Kent
2019-09-26 13:05 ` David Howells
2019-09-24 13:22 ` [REPOST PATCH v3 07/16] xfs: mount-api - move xfs_parseargs() validation to a helper Ian Kent
2019-09-24 14:37 ` Brian Foster
2019-09-25 0:32 ` Ian Kent
2019-09-24 13:22 ` [REPOST PATCH v3 08/16] xfs: mount-api - refactor xfs_fs_fill_super() Ian Kent
2019-09-24 14:38 ` Brian Foster
2019-09-24 13:22 ` [REPOST PATCH v3 09/16] xfs: mount-api - add xfs_get_tree() Ian Kent
2019-09-24 14:38 ` Brian Foster
2019-09-25 7:42 ` Ian Kent
2019-09-25 8:07 ` Ian Kent
2019-09-25 14:34 ` Brian Foster
2019-09-26 3:27 ` Ian Kent
2019-09-26 11:14 ` Brian Foster
2019-09-27 1:16 ` Ian Kent
2019-09-27 11:02 ` Brian Foster
2019-09-24 13:22 ` [REPOST PATCH v3 10/16] xfs: mount-api - add xfs_remount_rw() helper Ian Kent
2019-09-24 13:22 ` [REPOST PATCH v3 11/16] xfs: mount-api - add xfs_remount_ro() helper Ian Kent
2019-09-24 14:38 ` Brian Foster
2019-09-25 5:19 ` Ian Kent
2019-09-24 13:23 ` [REPOST PATCH v3 12/16] xfs: mount api - add xfs_reconfigure() Ian Kent
2019-09-24 14:38 ` Brian Foster
2019-09-25 5:21 ` Ian Kent
2019-09-25 14:34 ` Brian Foster
2019-09-24 13:23 ` [REPOST PATCH v3 13/16] xfs: mount-api - add xfs_fc_free() Ian Kent
2019-09-24 13:23 ` [REPOST PATCH v3 14/16] xfs: mount-api - dont set sb in xfs_mount_alloc() Ian Kent
2019-09-24 13:23 ` [REPOST PATCH v3 15/16] xfs: mount-api - switch to new mount-api Ian Kent
2019-09-24 13:23 ` [REPOST PATCH v3 16/16] xfs: mount-api - remove legacy mount functions Ian Kent
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=156933135322.20933.2166438700224340142.stgit@fedora-28 \
--to=raven@themaw.net \
--cc=dchinner@redhat.com \
--cc=dhowells@redhat.com \
--cc=linux-xfs@vger.kernel.org \
--cc=sandeen@sandeen.net \
--cc=viro@ZenIV.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox