public inbox for linux-xfs@vger.kernel.org
 help / color / mirror / Atom feed
From: Dave Chinner <david@fromorbit.com>
To: Christoph Hellwig <hch@infradead.org>
Cc: xfs@oss.sgi.com
Subject: Re: [PATCH] XFS: Ensure we force all busy extents in range to disk
Date: Sat, 2 Jan 2010 23:05:34 +1100	[thread overview]
Message-ID: <20100102120534.GF13802@discord.disaster> (raw)
In-Reply-To: <20100102112329.GA27329@infradead.org>

On Sat, Jan 02, 2010 at 06:23:29AM -0500, Christoph Hellwig wrote:
> Looks good, and quite interestin that we never could it before.
> 
> Some nipicks below:
> 
> > +	/*
> > +	 * search pagb_list for this slot, skipping open slots. We have to
> > +	 * search the entire array as there may be multiple overlaps and
> > +	 * we have to get the most recent LSN for the log force to push out
> > +	 * all the transactions that span the range.
> > +	 */
> > +	for (bsy = pag->pagb_list; cnt; bsy++, cnt--) {
> 
> Maybe you coult convert this to a more standard loop idiom while you're
> at it:
> 
> 	for (cnt = 0; cnt < pag->pagb_count; cnt++) {
> 		bsy = &pag->pagb_list[cnt];

Done.

> > +		if (!bsy->busy_tp)
> > +			continue;
> >  
> > +		bend = bsy->busy_start + bsy->busy_length - 1;
> > +		if ((bno > bend) || (uend < bsy->busy_start))
> 
> no need for the inner braces here.

And done. Patch below.

> And btw, the standard subsystem prefix is all lower case, xfs:, not
> XFS:.

One of these days I'll get it right ;)

> Also it seems like this patch requires your perag-lookup fixes first.

Yes. I've kind of been assuming that they will go in after reviews
and fixups are completed.

> Time to get them into the for-2.6.34 git tree ASAP as a base to work
> against.  That might also make it easier to work on the lockless patch
> separately.

Agreed.

Cheers,

Dave.
-- 
Dave Chinner
david@fromorbit.com


xfs: Ensure we force all busy extents in range to disk

When we search for and find a busy extent during allocation we force
the log out to ensure the extent free transaction is on disk before
the allocation transaction. The curret implementation has a subtle
bug in it - it does not handle multiple overlapping ranges.

That is, if we free lots of little extents into a single contiguous
extent, then allocate the contiguous extent, the busy search code
stops searching at the first extent it finds that overlaps the
allocated range. It then uses the commit LSN of the transaction to
force the log out to.

Unfortunately, the other busy ranges might have more recent commit
LSNs than the first busy extent that is found, and this results in
xfs_alloc_search_busy() returning before all the extent free
transactions are on disk for the range being allocated. This can
lead to potential metadata corruption or stale data exposure after
a crash because log replay won't replay all the extent free
transactions that cover the allocation range.

Signed-off-by: Dave Chinner <david@fromorbit.com>
---
 fs/xfs/linux-2.6/xfs_trace.h |    9 +++++--
 fs/xfs/xfs_alloc.c           |   47 +++++++++++++++++++----------------------
 2 files changed, 28 insertions(+), 28 deletions(-)

diff --git a/fs/xfs/linux-2.6/xfs_trace.h b/fs/xfs/linux-2.6/xfs_trace.h
index 5ec1475..2b0819a 100644
--- a/fs/xfs/linux-2.6/xfs_trace.h
+++ b/fs/xfs/linux-2.6/xfs_trace.h
@@ -1064,14 +1064,15 @@ TRACE_EVENT(xfs_alloc_unbusy,
 
 TRACE_EVENT(xfs_alloc_busysearch,
 	TP_PROTO(struct xfs_mount *mp, xfs_agnumber_t agno, xfs_agblock_t agbno,
-		 xfs_extlen_t len, int found),
-	TP_ARGS(mp, agno, agbno, len, found),
+		 xfs_extlen_t len, int found, xfs_lsn_t lsn),
+	TP_ARGS(mp, agno, agbno, len, found, lsn),
 	TP_STRUCT__entry(
 		__field(dev_t, dev)
 		__field(xfs_agnumber_t, agno)
 		__field(xfs_agblock_t, agbno)
 		__field(xfs_extlen_t, len)
 		__field(int, found)
+		__field(xfs_lsn_t, lsn)
 	),
 	TP_fast_assign(
 		__entry->dev = mp->m_super->s_dev;
@@ -1079,12 +1080,14 @@ TRACE_EVENT(xfs_alloc_busysearch,
 		__entry->agbno = agbno;
 		__entry->len = len;
 		__entry->found = found;
+		__entry->lsn = lsn;
 	),
-	TP_printk("dev %d:%d agno %u agbno %u len %u %s",
+	TP_printk("dev %d:%d agno %u agbno %u len %u force lsn 0x%llx %s",
 		  MAJOR(__entry->dev), MINOR(__entry->dev),
 		  __entry->agno,
 		  __entry->agbno,
 		  __entry->len,
+		  __entry->lsn,
 		  __print_symbolic(__entry->found, XFS_BUSY_STATES))
 );
 
diff --git a/fs/xfs/xfs_alloc.c b/fs/xfs/xfs_alloc.c
index d58ca99..c9ee98d 100644
--- a/fs/xfs/xfs_alloc.c
+++ b/fs/xfs/xfs_alloc.c
@@ -2565,43 +2565,40 @@ xfs_alloc_search_busy(xfs_trans_t *tp,
 	struct xfs_perag	*pag;
 	xfs_perag_busy_t	*bsy;
 	xfs_agblock_t		uend, bend;
-	xfs_lsn_t		lsn;
+	xfs_lsn_t		lsn = 0;
 	int			cnt;
 
 	pag = xfs_perag_get(tp->t_mountp, agno);
 	spin_lock(&pag->pagb_lock);
-	cnt = pag->pagb_count;
-
 	uend = bno + len - 1;
 
-	/* search pagb_list for this slot, skipping open slots */
-	for (bsy = pag->pagb_list; cnt; bsy++) {
+	/*
+	 * search pagb_list for this slot, skipping open slots. We have to
+	 * search the entire array as there may be multiple overlaps and
+	 * we have to get the most recent LSN for the log force to push out
+	 * all the transactions that span the range.
+	 */
+	for (cnt = 0; cnt < pag->pagb_count; cnt++) {
+		bsy = &pag->pagb_list[cnt];
+		if (!bsy->busy_tp)
+			continue;
 
-		/*
-		 * (start1,length1) within (start2, length2)
-		 */
-		if (bsy->busy_tp != NULL) {
-			bend = bsy->busy_start + bsy->busy_length - 1;
-			if ((bno > bend) || (uend < bsy->busy_start)) {
-				cnt--;
-			} else {
-				break;
-			}
-		}
-	}
+		bend = bsy->busy_start + bsy->busy_length - 1;
+		if (bno > bend || uend < bsy->busy_start)
+			continue;
 
-	trace_xfs_alloc_busysearch(tp->t_mountp, agno, bno, len, !!cnt);
+		/* (start1,length1) within (start2, length2) */
+		if (XFS_LSN_CMP(bsy->busy_tp->t_commit_lsn, lsn) > 0)
+			lsn = bsy->busy_tp->t_commit_lsn;
+	}
+	spin_unlock(&pag->pagb_lock);
+	xfs_perag_put(pag);
+	trace_xfs_alloc_busysearch(tp->t_mountp, agno, bno, len, !!cnt, lsn);
 
 	/*
 	 * If a block was found, force the log through the LSN of the
 	 * transaction that freed the block
 	 */
-	if (cnt) {
-		lsn = bsy->busy_tp->t_commit_lsn;
-		spin_unlock(&pag->pagb_lock);
+	if (lsn)
 		xfs_log_force(tp->t_mountp, lsn, XFS_LOG_FORCE|XFS_LOG_SYNC);
-	} else {
-		spin_unlock(&pag->pagb_lock);
-	}
-	xfs_perag_put(pag);
 }

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

      reply	other threads:[~2010-01-02 12:04 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-02  2:38 [PATCH] XFS: Ensure we force all busy extents in range to disk Dave Chinner
2010-01-02 11:23 ` Christoph Hellwig
2010-01-02 12:05   ` Dave Chinner [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100102120534.GF13802@discord.disaster \
    --to=david@fromorbit.com \
    --cc=hch@infradead.org \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox