Re: xfs mount/create options (was: XFS status update for August 2010)

[Michael Monnerie <michael.monnerie@is.it-management.at>]

[-- Attachment #1.1: Type: Text/Plain, Size: 1913 bytes --]

I looked into man mkfs now, which brings up these questions:

On Sonntag, 5. September 2010 Dave Chinner wrote:
>         - relatime,logbufs=8,attr=2,barrier are all defaults.

Why isn't logbsize=256k default, when it's suggested most of the time 
anyway? On machines with 32MiB or more 32k is the default, but most 
machines these days have multi-gigabytes of RAM, so at least for 
RAM>1GiB that could be made default.

>         - largeio only affects stat(2) output if you have
>           sunit/swidth set - unlikely on a laptop drive, and has
>           no effect on unlink performance.
>         - swalloc only affects allocation if sunit/swidth are set
>           and has no effect on unlink performance.

Hm, it seems I don't understand that. I tried now on different servers, 
using
stat -f /disks/db --format '%s %S'
4096 4096

That filesystems were all created with su=64k,swidth=(values 4-8 
depending on RAID). So I retried specifying directly in the mount 
options: sunit=128,swidth=512
and it still reports "4096" for %s - or is %s not the value I should 
look for? Some of the filesystems even have allocsize= specified, still 
always 4096 is given back. Where is my problem?

And while I am at it: Why does "mount" not provide the su=/sw= options 
that we can use to create a filesystem? Would make life easier, as it's 
much easier to read su=64k,sw=7 than sunit=128,swidth=896.

When I defined su/sw on mkfs, is it enough, or would I always have to 
specify sunit/swidth with every mount too?

-- 
mit freundlichen Grüssen,
Michael Monnerie, Ing. BSc

it-management Internet Services
http://proteger.at [gesprochen: Prot-e-schee]
Tel: 0660 / 415 65 31

****** Aktuelles Radiointerview! ******
http://www.it-podcast.at/aktuelle-sendung.html

// Wir haben im Moment zwei Häuser zu verkaufen:
// http://zmi.at/langegg/
// http://zmi.at/haus2009/

[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

[-- Attachment #2: Type: text/plain, Size: 121 bytes --]

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs