public inbox for linux-xfs@vger.kernel.org
 help / color / mirror / Atom feed
From: Christoph Hellwig <hch@infradead.org>
To: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>,
	Marius Tolzmann <tolzmann@molgen.mpg.de>,
	xfs@oss.sgi.com
Subject: Re: [PATCH] xfstests: check block truncation after write failure
Date: Wed, 10 Nov 2010 07:55:00 -0500	[thread overview]
Message-ID: <20101110125500.GA9828@infradead.org> (raw)
In-Reply-To: <20101109223426.GO2715@dastard>

Below is a version using od.  The output in case of failure is not
quite as easily readable as the original, but in the end portability
wins:

---
From: Christoph Hellwig <hch@lst.de>
Subject: [PATCH] xfstests: check block truncation after write failure
Cc: Marius Tolzmann <tolzmann@molgen.mpg.de>

Extraced from  https://bugzilla.kernel.org/show_bug.cgi?id=22452
"data corruption after mmap()ing a file and writev() some data to another file"

Signed-off-by: Christoph Hellwig <hch@lst.de>

Index: xfstests-dev/246
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ xfstests-dev/246	2010-11-10 12:50:10.000000000 +0000
@@ -0,0 +1,60 @@
+#! /bin/bash
+# FS QA Test No. 246
+#
+# Check that truncation after failed writes does not zero too much data.
+#
+# Based on a bug report and testcase from
+# Marius Tolzmann <tolzmann@molgen.mpg.de>
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2010 Christoph Hellwig.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+#-----------------------------------------------------------------------
+#
+# creator
+owner=hch@lst.de
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+
+file=$TEST_DIR/mmap-writev
+
+_cleanup()
+{
+	rm -rf $file
+	rm -rf $file.NEW
+}
+
+trap "_cleanup ; exit \$status" 0 1 2 3 15
+
+echo -n "cccccccccc" > $file
+$here/src/t_mmap_writev $file $file.NEW
+od -t x2 $file.NEW
+
+status=0
+exit $status
Index: xfstests-dev/246.out
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ xfstests-dev/246.out	2010-11-10 12:50:30.000000000 +0000
@@ -0,0 +1,4 @@
+QA output created by 246
+0000000 6161 6161 6161 6161 6161 6262 6262 6262
+0000020 6262 6262 6363 6363 6363 6363 6363
+0000036
Index: xfstests-dev/group
===================================================================
--- xfstests-dev.orig/group	2010-11-10 12:40:29.000000000 +0000
+++ xfstests-dev/group	2010-11-10 12:40:40.000000000 +0000
@@ -359,3 +359,4 @@ deprecated
 243 auto quick prealloc
 244 auto quota quick
 245 auto quick dir
+246 auto quick rw
Index: xfstests-dev/src/Makefile
===================================================================
--- xfstests-dev.orig/src/Makefile	2010-11-10 12:39:26.000000000 +0000
+++ xfstests-dev/src/Makefile	2010-11-10 12:40:40.000000000 +0000
@@ -10,7 +10,8 @@ TARGETS = dirstress fill fill2 getpagesi
 	mmapcat append_reader append_writer dirperf metaperf \
 	devzero feature alloc fault fstest t_access_root \
 	godown resvtest writemod makeextents itrash rename \
-	multi_open_unlink dmiperf unwritten_sync genhashnames t_holes
+	multi_open_unlink dmiperf unwritten_sync genhashnames t_holes \
+	t_mmap_writev
 
 LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
 	preallo_rw_pattern_writer ftrunc trunc fs_perms testx looptest \
Index: xfstests-dev/src/t_mmap_writev.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ xfstests-dev/src/t_mmap_writev.c	2010-11-10 12:40:40.000000000 +0000
@@ -0,0 +1,70 @@
+/*
+    mmap() a file and writev() back to another file
+         - kernel bug #22452 testcase
+
+    Copyright (C) 2010
+         by D.Buczek - Max Planck Institute for Molecular Genetics Berlin
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#include <sys/types.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include <sys/mman.h>
+#include <string.h>
+#include <sys/uio.h>
+#include <unistd.h>
+
+int main(int argc, char **argv)
+{
+	char *file = argv[1];
+	char *new_file = argv[2];
+	int fd;
+	int fd_new;
+	void *base;
+
+	struct iovec iovec[3]=
+	{
+		{ "aaaaaaaaaa" , 10 },
+		{ "bbbbbbbbbb" , 10 },
+	 	{ NULL , 10 }
+	};
+
+	int i;
+
+	fd=open(file, O_RDONLY);
+	if (fd==-1) {perror("open");exit(1);}
+
+	base = mmap(NULL,16384,PROT_READ,MAP_SHARED,fd,0);
+	if  (base == (void *)-1) { perror("mmap");exit(1); }
+
+	unlink(new_file);
+
+	fd_new=open(new_file,O_RDWR|O_CREAT,0666);
+	if (fd_new==-1) {perror("creat");exit(1);}
+
+	iovec[2].iov_base=(char *)base;
+	i=writev(fd_new,iovec,sizeof(iovec)/sizeof(*iovec));
+	if (i==-1) {perror("writev");exit(1);}
+
+	close(fd_new);
+	munmap(base,16384);
+	close(fd);
+
+	return 0;
+}

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

  reply	other threads:[~2010-11-10 12:53 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-09 11:49 [PATCH] xfstests: check block truncation after write failure Christoph Hellwig
2010-11-09 22:34 ` Dave Chinner
2010-11-10 12:55   ` Christoph Hellwig [this message]
2010-11-17  9:17     ` Christoph Hellwig
2010-11-19 14:53     ` Eric Sandeen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20101110125500.GA9828@infradead.org \
    --to=hch@infradead.org \
    --cc=david@fromorbit.com \
    --cc=tolzmann@molgen.mpg.de \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox