From: Christoph Hellwig <hch@infradead.org>
To: xfs@oss.sgi.com
Subject: [PATCH 1/4] xfs: remove leftovers of old buffer log items in recovery code
Date: Wed, 01 Dec 2010 17:06:21 -0500 [thread overview]
Message-ID: <20101201220710.042656730@bombadil.infradead.org> (raw)
In-Reply-To: 20101201220620.340188389@bombadil.infradead.org
[-- Attachment #1: xfs-remove-blf_type-switches --]
[-- Type: text/plain, Size: 8640 bytes --]
XFS used to support different types of buffer log items long time ago.
Remove the switch statements checking the log item type in various
buffer recovery helpers that were left over from those days and the
rather useless xlog_recover_do_buffer_pass2 wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Index: xfs/fs/xfs/xfs_log_recover.c
===================================================================
--- xfs.orig/fs/xfs/xfs_log_recover.c 2010-11-29 15:06:43.921010269 +0100
+++ xfs/fs/xfs/xfs_log_recover.c 2010-11-29 16:33:20.495004054 +0100
@@ -1614,22 +1614,13 @@ xlog_recover_do_buffer_pass1(
xfs_buf_cancel_t *nextp;
xfs_buf_cancel_t *prevp;
xfs_buf_cancel_t **bucket;
- xfs_daddr_t blkno = 0;
- uint len = 0;
- ushort flags = 0;
-
- switch (buf_f->blf_type) {
- case XFS_LI_BUF:
- blkno = buf_f->blf_blkno;
- len = buf_f->blf_len;
- flags = buf_f->blf_flags;
- break;
- }
+ xfs_daddr_t blkno = buf_f->blf_blkno;
+ uint len = buf_f->blf_len;
/*
* If this isn't a cancel buffer item, then just return.
*/
- if (!(flags & XFS_BLF_CANCEL)) {
+ if (!(buf_f->blf_flags & XFS_BLF_CANCEL)) {
trace_xfs_log_recover_buf_not_cancel(log, buf_f);
return;
}
@@ -1767,77 +1758,38 @@ xlog_check_buffer_cancelled(
return 0;
}
-STATIC int
-xlog_recover_do_buffer_pass2(
- xlog_t *log,
- xfs_buf_log_format_t *buf_f)
-{
- xfs_daddr_t blkno = 0;
- ushort flags = 0;
- uint len = 0;
-
- switch (buf_f->blf_type) {
- case XFS_LI_BUF:
- blkno = buf_f->blf_blkno;
- flags = buf_f->blf_flags;
- len = buf_f->blf_len;
- break;
- }
-
- return xlog_check_buffer_cancelled(log, blkno, len, flags);
-}
-
/*
- * Perform recovery for a buffer full of inodes. In these buffers,
- * the only data which should be recovered is that which corresponds
- * to the di_next_unlinked pointers in the on disk inode structures.
- * The rest of the data for the inodes is always logged through the
- * inodes themselves rather than the inode buffer and is recovered
- * in xlog_recover_do_inode_trans().
+ * Perform recovery for a buffer full of inodes. In these buffers, the only
+ * data which should be recovered is that which corresponds to the
+ * di_next_unlinked pointers in the on disk inode structures. The rest of the
+ * data for the inodes is always logged through the inodes themselves rather
+ * than the inode buffer and is recovered in xlog_recover_inode_pass2().
*
- * The only time when buffers full of inodes are fully recovered is
- * when the buffer is full of newly allocated inodes. In this case
- * the buffer will not be marked as an inode buffer and so will be
- * sent to xlog_recover_do_reg_buffer() below during recovery.
+ * The only time when buffers full of inodes are fully recovered is when the
+ * buffer is full of newly allocated inodes. In this case the buffer will
+ * not be marked as an inode buffer and so will be sent to
+ * xlog_recover_do_reg_buffer() below during recovery.
*/
STATIC int
xlog_recover_do_inode_buffer(
- xfs_mount_t *mp,
+ struct xfs_mount *mp,
xlog_recover_item_t *item,
- xfs_buf_t *bp,
+ struct xfs_buf *bp,
xfs_buf_log_format_t *buf_f)
{
int i;
- int item_index;
- int bit;
- int nbits;
- int reg_buf_offset;
- int reg_buf_bytes;
+ int item_index = 0;
+ int bit = 0;
+ int nbits = 0;
+ int reg_buf_offset = 0;
+ int reg_buf_bytes = 0;
int next_unlinked_offset;
int inodes_per_buf;
xfs_agino_t *logged_nextp;
xfs_agino_t *buffer_nextp;
- unsigned int *data_map = NULL;
- unsigned int map_size = 0;
trace_xfs_log_recover_buf_inode_buf(mp->m_log, buf_f);
- switch (buf_f->blf_type) {
- case XFS_LI_BUF:
- data_map = buf_f->blf_data_map;
- map_size = buf_f->blf_map_size;
- break;
- }
- /*
- * Set the variables corresponding to the current region to
- * 0 so that we'll initialize them on the first pass through
- * the loop.
- */
- reg_buf_offset = 0;
- reg_buf_bytes = 0;
- bit = 0;
- nbits = 0;
- item_index = 0;
inodes_per_buf = XFS_BUF_COUNT(bp) >> mp->m_sb.sb_inodelog;
for (i = 0; i < inodes_per_buf; i++) {
next_unlinked_offset = (i * mp->m_sb.sb_inodesize) +
@@ -1852,18 +1804,18 @@ xlog_recover_do_inode_buffer(
* the current di_next_unlinked field.
*/
bit += nbits;
- bit = xfs_next_bit(data_map, map_size, bit);
+ bit = xfs_next_bit(buf_f->blf_data_map,
+ buf_f->blf_map_size, bit);
/*
* If there are no more logged regions in the
* buffer, then we're done.
*/
- if (bit == -1) {
+ if (bit == -1)
return 0;
- }
- nbits = xfs_contig_bits(data_map, map_size,
- bit);
+ nbits = xfs_contig_bits(buf_f->blf_data_map,
+ buf_f->blf_map_size, bit);
ASSERT(nbits > 0);
reg_buf_offset = bit << XFS_BLF_SHIFT;
reg_buf_bytes = nbits << XFS_BLF_SHIFT;
@@ -1875,9 +1827,8 @@ xlog_recover_do_inode_buffer(
* di_next_unlinked field, then move on to the next
* di_next_unlinked field.
*/
- if (next_unlinked_offset < reg_buf_offset) {
+ if (next_unlinked_offset < reg_buf_offset)
continue;
- }
ASSERT(item->ri_buf[item_index].i_addr != NULL);
ASSERT((item->ri_buf[item_index].i_len % XFS_BLF_CHUNK) == 0);
@@ -1913,36 +1864,29 @@ xlog_recover_do_inode_buffer(
* given buffer. The bitmap in the buf log format structure indicates
* where to place the logged data.
*/
-/*ARGSUSED*/
STATIC void
xlog_recover_do_reg_buffer(
struct xfs_mount *mp,
xlog_recover_item_t *item,
- xfs_buf_t *bp,
+ struct xfs_buf *bp,
xfs_buf_log_format_t *buf_f)
{
int i;
int bit;
int nbits;
- unsigned int *data_map = NULL;
- unsigned int map_size = 0;
int error;
trace_xfs_log_recover_buf_reg_buf(mp->m_log, buf_f);
- switch (buf_f->blf_type) {
- case XFS_LI_BUF:
- data_map = buf_f->blf_data_map;
- map_size = buf_f->blf_map_size;
- break;
- }
bit = 0;
i = 1; /* 0 is the buf format structure */
while (1) {
- bit = xfs_next_bit(data_map, map_size, bit);
+ bit = xfs_next_bit(buf_f->blf_data_map,
+ buf_f->blf_map_size, bit);
if (bit == -1)
break;
- nbits = xfs_contig_bits(data_map, map_size, bit);
+ nbits = xfs_contig_bits(buf_f->blf_data_map,
+ buf_f->blf_map_size, bit);
ASSERT(nbits > 0);
ASSERT(item->ri_buf[i].i_addr != NULL);
ASSERT(item->ri_buf[i].i_len % XFS_BLF_CHUNK == 0);
@@ -2182,13 +2126,9 @@ xlog_recover_do_buffer_trans(
int pass)
{
xfs_buf_log_format_t *buf_f = item->ri_buf[0].i_addr;
- xfs_mount_t *mp;
+ xfs_mount_t *mp = log->l_mp;
xfs_buf_t *bp;
int error;
- int cancel;
- xfs_daddr_t blkno;
- int len;
- ushort flags;
uint buf_flags;
if (pass == XLOG_RECOVER_PASS1) {
@@ -2206,47 +2146,32 @@ xlog_recover_do_buffer_trans(
* we call here will tell us whether or not to
* continue with the replay of this buffer.
*/
- cancel = xlog_recover_do_buffer_pass2(log, buf_f);
- if (cancel) {
+ if (xlog_check_buffer_cancelled(log, buf_f->blf_blkno,
+ buf_f->blf_len, buf_f->blf_flags)) {
trace_xfs_log_recover_buf_cancel(log, buf_f);
return 0;
}
}
trace_xfs_log_recover_buf_recover(log, buf_f);
- switch (buf_f->blf_type) {
- case XFS_LI_BUF:
- blkno = buf_f->blf_blkno;
- len = buf_f->blf_len;
- flags = buf_f->blf_flags;
- break;
- default:
- xfs_fs_cmn_err(CE_ALERT, log->l_mp,
- "xfs_log_recover: unknown buffer type 0x%x, logdev %s",
- buf_f->blf_type, log->l_mp->m_logname ?
- log->l_mp->m_logname : "internal");
- XFS_ERROR_REPORT("xlog_recover_do_buffer_trans",
- XFS_ERRLEVEL_LOW, log->l_mp);
- return XFS_ERROR(EFSCORRUPTED);
- }
- mp = log->l_mp;
buf_flags = XBF_LOCK;
- if (!(flags & XFS_BLF_INODE_BUF))
+ if (!(buf_f->blf_flags & XFS_BLF_INODE_BUF))
buf_flags |= XBF_MAPPED;
- bp = xfs_buf_read(mp->m_ddev_targp, blkno, len, buf_flags);
+ bp = xfs_buf_read(mp->m_ddev_targp, buf_f->blf_blkno, buf_f->blf_len,
+ buf_flags);
if (XFS_BUF_ISERROR(bp)) {
- xfs_ioerror_alert("xlog_recover_do..(read#1)", log->l_mp,
- bp, blkno);
+ xfs_ioerror_alert("xlog_recover_do..(read#1)", mp,
+ bp, buf_f->blf_blkno);
error = XFS_BUF_GETERROR(bp);
xfs_buf_relse(bp);
return error;
}
error = 0;
- if (flags & XFS_BLF_INODE_BUF) {
+ if (buf_f->blf_flags & XFS_BLF_INODE_BUF) {
error = xlog_recover_do_inode_buffer(mp, item, bp, buf_f);
- } else if (flags &
+ } else if (buf_f->blf_flags &
(XFS_BLF_UDQUOT_BUF|XFS_BLF_PDQUOT_BUF|XFS_BLF_GDQUOT_BUF)) {
xlog_recover_do_dquot_buffer(mp, log, item, bp, buf_f);
} else {
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2010-12-01 22:05 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-01 22:06 [PATCH 0/4] log recovery cleanups Christoph Hellwig
2010-12-01 22:06 ` Christoph Hellwig [this message]
2010-12-23 1:50 ` [PATCH 1/4] xfs: remove leftovers of old buffer log items in recovery code Dave Chinner
2010-12-01 22:06 ` [PATCH 2/4] xfs: use struct list_head for the buf cancel table Christoph Hellwig
2010-12-23 1:54 ` Dave Chinner
2010-12-01 22:06 ` [PATCH 3/4] xfs: refactor xlog_recover_commit_trans Christoph Hellwig
2010-12-16 21:18 ` Alex Elder
2010-12-20 11:28 ` Christoph Hellwig
2010-12-23 1:56 ` Dave Chinner
2010-12-01 22:06 ` [PATCH 4/4] xfs: untangle phase1 vs phase2 recovery helpers Christoph Hellwig
2010-12-23 2:06 ` Dave Chinner
2010-12-16 21:14 ` [PATCH 0/4] log recovery cleanups Alex Elder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101201220710.042656730@bombadil.infradead.org \
--to=hch@infradead.org \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox