public inbox for linux-xfs@vger.kernel.org
 help / color / mirror / Atom feed
From: Ben Myers <bpm@sgi.com>
To: Carlos Maiolino <cmaiolino@redhat.com>
Cc: xfs@oss.sgi.com
Subject: Re: [PATCH] xfstests 276: Ensure lost+found is not created with wrong link count
Date: Mon, 12 Dec 2011 13:30:33 -0600	[thread overview]
Message-ID: <20111212193033.GX29840@sgi.com> (raw)
In-Reply-To: <1323449801-29183-1-git-send-email-cmaiolino@redhat.com>

On Fri, Dec 09, 2011 at 02:56:41PM -0200, Carlos Maiolino wrote:
> xfs_repair was leaving lost+found directory with a wrong link count when a
> cleaned inode was re-used to create lost+found. This test case confirm that,
> after xfs_repair is executed, the lost+found inode is left in a consistent
> state.
> See commit: 198b747f255346bca64408875763b6ca0ed3d57d from xfsprogs tree
> 
> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>

Looks like a pretty good test... please address Eric and Dave's
suggestions and repost.

Reviewed-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com

> ---
>  276     |   86 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  276.out |    2 +
>  group   |    1 +
>  3 files changed, 89 insertions(+), 0 deletions(-)
>  create mode 100755 276
>  create mode 100644 276.out
> 
> diff --git a/276 b/276
> new file mode 100755
> index 0000000..970169d
> --- /dev/null
> +++ b/276
> @@ -0,0 +1,86 @@
> +#! /bin/bash
> +# FS QA Test No. 276
> +#
> +# Test xfs_repair to ensure it fixes the lost+found link count
> +# at the first run. See also commit 198b747f255346bca64408875763b6ca0ed3d57d
> +# from xfsprogs tree.
> +# 
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2011 Red Hat, Inc.  All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#-----------------------------------------------------------------------
> +#
> +# creator
> +owner=cmaiolino@redhat.com
> +
> +seq=`basename $0`
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +    cd /
> +    rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common.rc
> +. ./common.filter
> +
> +# real QA test starts here
> +_supported_fs xfs 
> +_supported_os Linux
> +_require_scratch
> +_scratch_mkfs >/dev/null 2>&1
> +_scratch_mount
> +
> +mkdir -p $SCRATCH_MNT/dir/subdir
> +
> +#get inodes to be changed
> +DIR_INO=`ls -i $SCRATCH_MNT |awk '{print $1}'`
> +SUBDIR_INO=`ls -i $SCRATCH_MNT/dir |awk '{print $1}'`
> +
> +_scratch_unmount
> +
> +echo "Silence is goodness..."
> +
> +# Corrupt DIR
> +xfs_db -x -c "inode $DIR_INO" -c "write u.sfdir2.list[0].inumber.i4 0" $SCRATCH_DEV > /dev/null 2>&1
> +xfs_db -x -c "inode $DIR_INO" -c "write u.sfdir2.list[0].name 0" $SCRATCH_DEV >/dev/null 2>&1
> +xfs_db -x -c "inode $DIR_INO" -c "write u.sfdir2.list[0].offset 0" $SCRATCH_DEV >/dev/null 2>&1
> +xfs_db -x -c "inode $DIR_INO" -c "write u.sfdir2.list[0].namelen 0" $SCRATCH_DEV >/dev/null 2>&1
> +xfs_db -x -c "inode $DIR_INO" -c "write u.sfdir2.hdr.parent.i4 0" $SCRATCH_DEV >/dev/null 2>&1
> +xfs_db -x -c "inode $DIR_INO" -c "write core.nlinkv2 0" $SCRATCH_DEV >/dev/null 2>&1
> +
> +# Corrupt SUBDIR
> +xfs_db -x -c "inode $SUBDIR_INO" -c "write u.sfdir2.hdr.parent.i4 0" $SCRATCH_DEV >/dev/null 2>&1
> +xfs_db -x -c "inode $SUBDIR_INO" -c "write core.nlinkv2 0" $SCRATCH_DEV >/dev/null 2>&1
> +
> +xfs_check $SCRATCH_DEV >/dev/null 2>&1
> +xfs_repair $SCRATCH_DEV >/dev/null 2>&1
> +RESULT=`xfs_check $SCRATCH_DEV`
> +
> +if [ "$RESULT" == "" ]; then
> +	status=0
> +else
> +	echo "$RESULT"
> +fi
> +# if error
> +exit
> diff --git a/276.out b/276.out
> new file mode 100644
> index 0000000..8b8888b
> --- /dev/null
> +++ b/276.out
> @@ -0,0 +1,2 @@
> +QA output created by 276
> +Silence is goodness...
> diff --git a/group b/group
> index 08d999a..16e9f10 100644
> --- a/group
> +++ b/group
> @@ -389,3 +389,4 @@ deprecated
>  273 auto rw
>  274 auto rw
>  275 auto rw
> +276 repair
> -- 
> 1.7.6.4
> 
> _______________________________________________
> xfs mailing list
> xfs@oss.sgi.com
> http://oss.sgi.com/mailman/listinfo/xfs

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

      parent reply	other threads:[~2011-12-12 19:30 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-09 16:56 [PATCH] xfstests 276: Ensure lost+found is not created with wrong link count Carlos Maiolino
2011-12-09 19:21 ` Eric Sandeen
2011-12-09 22:25   ` Dave Chinner
2011-12-12 19:30 ` Ben Myers [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20111212193033.GX29840@sgi.com \
    --to=bpm@sgi.com \
    --cc=cmaiolino@redhat.com \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox