Re: [PATCH 3/3] xfs: prevent needless mount warning causing test failures

[Ben Myers <bpm@sgi.com>]

On Fri, Apr 27, 2012 at 07:45:22PM +1000, Dave Chinner wrote:
> From: Dave Chinner <dchinner@redhat.com>
> 
> Often mounting small filesystem with small logs will emit a warning
> such as:
> 
> XFS (vdb): Invalid block length (0x2000) for buffer
> 
> during log recovery. This causes tests to randomly fail because this
> output causes the clean filesystem checks on test completion to
> think the filesystem is inconsistent.
> 
> The cause of the error is simply that log recovery is asking for a
> buffer size that is larger than the log when zeroing the tail. This
> is because the buffer size is rounded up, and if the right head and
> tail conditions exist then the buffer size can be larger than the log.
> Limit the variable size xlog_get_bp() callers to requesting buffers
> smaller than the log.
> 
> Signed-off-by: Dave Chinner <dchinner@redhat.com>
> ---
>  fs/xfs/xfs_log_recover.c |    4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
> index d7abe5f..ca38690 100644
> --- a/fs/xfs/xfs_log_recover.c
> +++ b/fs/xfs/xfs_log_recover.c
> @@ -441,6 +441,8 @@ xlog_find_verify_cycle(
>  	 * a log sector, or we're out of luck.
>  	 */
>  	bufblks = 1 << ffs(nbblks);
> +	while (bufblks > log->l_logBBsize)
> +		bufblks >>= 1;

AFAICS you don't need a loop here.  The following would be sufficient to make
xlog_buf_bbcount_valid return 0. 

if (bufblks > log->l_logBBsize)
	bufblks = log->l_logBBsize;

It is a bit more obviously correct.

-Ben

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs