public inbox for linux-xfs@vger.kernel.org
 help / color / mirror / Atom feed
From: Mark Tinguely <tinguely@sgi.com>
To: stable@vger.kernel.org
Cc: xfs@oss.sgi.com
Subject: [3.0-stable PATCH 13/36] xfs: Ensure inode reclaim can run during quotacheck
Date: Mon, 03 Dec 2012 17:42:21 -0600	[thread overview]
Message-ID: <20121203144310.016290469@sgi.com> (raw)
In-Reply-To: 20121203144208.143464631@sgi.com

[-- Attachment #1: 067 --]
[-- Type: text/plain, Size: 4620 bytes --]

From: Dave Chinner <dchinner@redhat.com>

Upstream commit: 8a00ebe4cfc90eda9ecb575ba97e22021cd8cf70

Because the mount process can run a quotacheck and consume lots of
inodes, we need to be able to run periodic inode reclaim during the
mount process. This will prevent running the system out of memory
during quota checks.

This essentially reverts 2bcf6e97, but that is safe to do now that
the quota sync code that was causing problems during long quotacheck
executions is now gone.

The reclaim work is currently protected from running during the
unmount process by a check against MS_ACTIVE. Unfortunately, this
also means that the reclaim work cannot run during mount.  The
unmount process should stop the reclaim cleanly before freeing
anything that the reclaim work depends on, so there is no need to
have this guard in place.

Also, the inode reclaim work is demand driven, so there is no need
to start it immediately during mount. It will be started the moment
an inode is queued for reclaim, so qutoacheck will trigger it just
fine.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
---
 fs/xfs/linux-2.6/xfs_super.c |   17 +++++++++--------
 fs/xfs/linux-2.6/xfs_sync.c  |   19 +++++++++----------
 2 files changed, 18 insertions(+), 18 deletions(-)

Index: b/fs/xfs/linux-2.6/xfs_super.c
===================================================================
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -994,7 +994,6 @@ xfs_fs_put_super(
 	 * structure so we don't have memory reclaim racing with us here.
 	 */
 	xfs_inode_shrinker_unregister(mp);
-	xfs_syncd_stop(mp);
 
 	/*
 	 * Blow away any referenced inode in the filestreams cache.
@@ -1006,6 +1005,7 @@ xfs_fs_put_super(
 	XFS_bflush(mp->m_ddev_targp);
 
 	xfs_unmountfs(mp);
+	xfs_syncd_stop(mp);
 	xfs_freesb(mp);
 	xfs_icsb_destroy_counters(mp);
 	xfs_close_devices(mp);
@@ -1378,22 +1378,22 @@ xfs_fs_fill_super(
 
 	xfs_inode_shrinker_register(mp);
 
-	error = xfs_mountfs(mp);
+	error = xfs_syncd_init(mp);
 	if (error)
 		goto out_filestream_unmount;
 
-	error = xfs_syncd_init(mp);
+	error = xfs_mountfs(mp);
 	if (error)
-		goto out_unmount;
+		goto out_syncd_stop;
 
 	root = igrab(VFS_I(mp->m_rootip));
 	if (!root) {
 		error = ENOENT;
-		goto out_syncd_stop;
+		goto out_unmount;
 	}
 	if (is_bad_inode(root)) {
 		error = EINVAL;
-		goto out_syncd_stop;
+		goto out_unmount;
 	}
 	sb->s_root = d_alloc_root(root);
 	if (!sb->s_root) {
@@ -1403,6 +1403,8 @@ xfs_fs_fill_super(
 
 	return 0;
 
+ out_syncd_stop:
+	xfs_syncd_stop(mp);
  out_filestream_unmount:
 	xfs_inode_shrinker_unregister(mp);
 	xfs_filestream_unmount(mp);
@@ -1420,8 +1422,6 @@ xfs_fs_fill_super(
 
  out_iput:
 	iput(root);
- out_syncd_stop:
-	xfs_syncd_stop(mp);
  out_unmount:
 	xfs_inode_shrinker_unregister(mp);
 
@@ -1435,6 +1435,7 @@ xfs_fs_fill_super(
 	XFS_bflush(mp->m_ddev_targp);
 
 	xfs_unmountfs(mp);
+	xfs_syncd_stop(mp);
 	goto out_free_sb;
 }
 
Index: b/fs/xfs/linux-2.6/xfs_sync.c
===================================================================
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -502,7 +502,15 @@ xfs_sync_worker(
 					struct xfs_mount, m_sync_work);
 	int		error;
 
-	if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
+	/*
+	 * We shouldn't write/force the log if we are in the mount/unmount
+	 * process or on a read only filesystem. The workqueue still needs to be
+	 * active in both cases, however, because it is used for inode reclaim
+	 * during these times. hence use the MS_ACTIVE flag to avoid doing
+	 * anything in these periods.
+	 */
+	if (!(mp->m_super->s_flags & MS_ACTIVE) &&
+	    !(mp->m_flags & XFS_MOUNT_RDONLY)) {
 		/* dgc: errors ignored here */
 		if (mp->m_super->s_frozen == SB_UNFROZEN &&
 		    xfs_log_need_covered(mp))
@@ -531,14 +539,6 @@ xfs_syncd_queue_reclaim(
 	struct xfs_mount        *mp)
 {
 
-	/*
-	 * We can have inodes enter reclaim after we've shut down the syncd
-	 * workqueue during unmount, so don't allow reclaim work to be queued
-	 * during unmount.
-	 */
-	if (!(mp->m_super->s_flags & MS_ACTIVE))
-		return;
-
 	rcu_read_lock();
 	if (radix_tree_tagged(&mp->m_perag_tree, XFS_ICI_RECLAIM_TAG)) {
 		queue_delayed_work(xfs_syncd_wq, &mp->m_reclaim_work,
@@ -607,7 +607,6 @@ xfs_syncd_init(
 	INIT_DELAYED_WORK(&mp->m_reclaim_work, xfs_reclaim_worker);
 
 	xfs_syncd_queue_sync(mp);
-	xfs_syncd_queue_reclaim(mp);
 
 	return 0;
 }


_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

  parent reply	other threads:[~2012-12-03 23:40 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-03 23:42 [3.0-stable PATCH 00/36] Proposed 3.0-stable bug patches Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 01/36] xfs: fix possible overflow in xfs_ioc_trim() Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 02/36] xfs: fix allocation length overflow in xfs_bmapi_write() Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 03/36] xfs: mark the xfssyncd workqueue as non-reentrant Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 04/36] xfs: xfs_trans_add_item() - dont assign in ASSERT() when compare is intended Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 05/36] xfs: only take the ILOCK in xfs_reclaim_inode() Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 06/36] xfs: fallback to vmalloc for large buffers in xfs_attrmulti_attr_get Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 07/36] xfs: fallback to vmalloc for large buffers in xfs_getbmap Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 08/36] xfs: fix deadlock in xfs_rtfree_extent Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 09/36] xfs: Fix open flag handling in open_by_handle code Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 10/36] xfs: Account log unmount transaction correctly Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 11/36] xfs: fix fstrim offset calculations Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 12/36] xfs: dont fill statvfs with project quota for a directory Mark Tinguely
2012-12-03 23:42 ` Mark Tinguely [this message]
2012-12-03 23:42 ` [3.0-stable PATCH 14/36] xfs: use shared ilock mode for direct IO writes by default Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 15/36] xfs: punch all delalloc blocks beyond EOF on write failure Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 16/36] xfs: page type check in writeback only checks last buffer Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 17/36] xfs: punch new delalloc blocks out of failed writes inside EOF Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 18/36] xfs: dont assert on delalloc regions beyond EOF Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 19/36] xfs: limit specualtive delalloc to maxioffset Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 20/36] xfs: Use preallocation for inodes with extsz hints Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 21/36] xfs: Dont allocate new buffers on every call to _xfs_buf_find Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 22/36] xfs: clean up buffer allocation Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 23/36] xfs: fix buffer lookup race on allocation failure Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 24/36] xfs: use iolock on XFS_IOC_ALLOCSP calls Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 25/36] xfs: Properly exclude IO type flags from buffer flags Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 26/36] xfs: flush outstanding buffers on log mount failure Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 27/36] xfs: protect xfs_sync_worker with s_umount semaphore Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 28/36] xfs: fix memory reclaim deadlock on agi buffer Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 29/36] xfs: xfs_vm_writepage clear iomap_valid when Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 30/36] xfs: fix allocbt cursor leak in xfs_alloc_ag_vextent_near Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 31/36] xfs: shutdown xfs_sync_worker before the log Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 32/36] xfs: really fix the cursor leak in xfs_alloc_ag_vextent_near Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 33/36] xfs: check for stale inode before acquiring iflock on push Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 34/36] xfs: stop the sync worker before xfs_unmountfs Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 35/36] xfs: zero allocation_args on the kernel stack Mark Tinguely
2012-12-03 23:42 ` [3.0-stable PATCH 36/36] xfs: only update the last_sync_lsn when a transaction completes Mark Tinguely
2012-12-04 21:44 ` [3.0-stable PATCH 00/36] Proposed 3.0-stable bug patches Ben Myers
2012-12-05 21:45 ` Dave Chinner
2012-12-06 17:27   ` Mark Tinguely
2012-12-07 10:06     ` Dave Chinner
2012-12-07 21:15       ` Ben Myers
2012-12-08 12:06         ` Christoph Hellwig
2012-12-08 19:12         ` Greg KH
2012-12-10  0:24         ` Dave Chinner
2012-12-10 22:03           ` Ben Myers

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121203144310.016290469@sgi.com \
    --to=tinguely@sgi.com \
    --cc=stable@vger.kernel.org \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox