From: Dave Chinner <david@fromorbit.com>
To: Jeff Liu <jeff.liu@oracle.com>
Cc: Mark Tinguely <tinguely@sgi.com>, "xfs@oss.sgi.com" <xfs@oss.sgi.com>
Subject: Re: [PATCH 1/2] xfs: Remove XFS_MOUNT_RETERR
Date: Thu, 2 May 2013 11:12:11 +1000 [thread overview]
Message-ID: <20130502011211.GR10481@dastard> (raw)
In-Reply-To: <518125C9.8000008@oracle.com>
On Wed, May 01, 2013 at 10:25:13PM +0800, Jeff Liu wrote:
> From: Jie Liu <jeff.liu@oracle.com>
>
> XFS_MOUNT_RETERR is going to be set at xfs_parseargs() if
> mp->m_dalign is enabled, so any time we enter "if (mp->m_dalign)"
> branch in xfs_update_alignment(), XFS_MOUNT_RETERR is set and
> so we always be emitting a warning and returning an error.
>
> Hence, we can remove it and get rid of a couple of redundant
> check up against it at xfs_upate_alignment().
>
> Thanks Dave Chinner for the confirmation.
>
> Signed-off-by: Jie Liu <jeff.liu@oracle.com>
> Cc: Dave Chinner <dchinner@redhat.com>
> Cc: Mark Tinguely <tinguely@sgi.com>
> ---
> fs/xfs/xfs_mount.c | 39 ++++++++++++---------------------------
> fs/xfs/xfs_mount.h | 2 --
> fs/xfs/xfs_super.c | 5 +----
> 3 files changed, 13 insertions(+), 33 deletions(-)
>
> diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
> index 3806088..29e8de8 100644
> --- a/fs/xfs/xfs_mount.c
> +++ b/fs/xfs/xfs_mount.c
> @@ -872,42 +872,27 @@ xfs_update_alignment(xfs_mount_t *mp)
> */
> if ((BBTOB(mp->m_dalign) & mp->m_blockmask) ||
> (BBTOB(mp->m_swidth) & mp->m_blockmask)) {
> - if (mp->m_flags & XFS_MOUNT_RETERR) {
> - xfs_warn(mp, "alignment check failed: "
> - "(sunit/swidth vs. blocksize)");
> - return XFS_ERROR(EINVAL);
> - }
> - mp->m_dalign = mp->m_swidth = 0;
> + xfs_warn(mp, "alignment check failed: "
> + "(sunit/swidth vs. blocksize)");
Let's convert these format strings to a single line at the same
time and be consistent with output. ie:
xfs_warn(mp,
"alignment check failed: sunit/swidth vs. blocksize(%d)",
sbp->sb_blocksize);
> + return XFS_ERROR(EINVAL);
> } else {
> /*
> * Convert the stripe unit and width to FSBs.
> */
> mp->m_dalign = XFS_BB_TO_FSBT(mp, mp->m_dalign);
> if (mp->m_dalign && (sbp->sb_agblocks % mp->m_dalign)) {
> - if (mp->m_flags & XFS_MOUNT_RETERR) {
> - xfs_warn(mp, "alignment check failed: "
> - "(sunit/swidth vs. ag size)");
> - return XFS_ERROR(EINVAL);
> - }
> - xfs_warn(mp,
> - "stripe alignment turned off: sunit(%d)/swidth(%d) "
> - "incompatible with agsize(%d)",
> - mp->m_dalign, mp->m_swidth,
> - sbp->sb_agblocks);
> -
> - mp->m_dalign = 0;
> - mp->m_swidth = 0;
> + xfs_warn(mp, "alignment check failed: "
> + "sunit(%d)/swidth(%d) incompatible with agsize(%d)",
"alignment check failed: sunit/swidth vs. agsize(%d)",
sbp->sb_agblocks);
> + mp->m_dalign, mp->m_swidth,
> + sbp->sb_agblocks);
> + return XFS_ERROR(EINVAL);
> } else if (mp->m_dalign) {
> mp->m_swidth = XFS_BB_TO_FSBT(mp, mp->m_swidth);
> } else {
> - if (mp->m_flags & XFS_MOUNT_RETERR) {
> - xfs_warn(mp, "alignment check failed: "
> - "sunit(%d) less than bsize(%d)",
> - mp->m_dalign,
> - mp->m_blockmask +1);
> - return XFS_ERROR(EINVAL);
> - }
> - mp->m_swidth = 0;
> + xfs_warn(mp, "alignment check failed: "
> + "sunit(%d) less than bsize(%d)",
> + mp->m_dalign, mp->m_blockmask + 1);
"alignment check failed: sunit(%d) less than bsize(%d)",
mp->m_dalign, sbp->sb_blocksize);
> + return XFS_ERROR(EINVAL);
> }
> }
>
> diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
> index bc90706..8145412 100644
> --- a/fs/xfs/xfs_mount.h
> +++ b/fs/xfs/xfs_mount.h
> @@ -230,8 +230,6 @@ typedef struct xfs_mount {
> operations, typically for
> disk errors in metadata */
> #define XFS_MOUNT_DISCARD (1ULL << 5) /* discard unused blocks */
> -#define XFS_MOUNT_RETERR (1ULL << 6) /* return alignment errors to
> - user */
> #define XFS_MOUNT_NOALIGN (1ULL << 7) /* turn off stripe alignment
> allocations */
> #define XFS_MOUNT_ATTR2 (1ULL << 8) /* allow use of attr2 format */
> diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
> index ea341ce..51da4d2 100644
> --- a/fs/xfs/xfs_super.c
> +++ b/fs/xfs/xfs_super.c
> @@ -446,11 +446,8 @@ done:
> * Before the mount call ends we will convert
> * these to FSBs.
> */
> - if (dsunit) {
> + if (dsunit)
> mp->m_dalign = dsunit;
> - mp->m_flags |= XFS_MOUNT_RETERR;
> - }
> -
> if (dswidth)
> mp->m_swidth = dswidth;
This code can be simplified, too. We've already done this check:
if ((dsunit && !dswidth) || (!dsunit && dswidth)) {
xfs_warn(mp, "sunit and swidth must be specified together");
return EINVAL;
}
So we know that dsunit/dswidth are either both zero or both set, so
the above code could simply end up as:
if (dsunit && !(mp->m_flags & XFS_MOUNT_NOALIGN)) {
/*
* At this point the superblock has not been read
* in, therefore we do not know the block size.
* Before the mount call ends we will convert
* these to FSBs.
*/
mp->m_dalign = dsunit;
mp->m_swidth = dswidth;
}
Cheers,
Dave.
--
Dave Chinner
david@fromorbit.com
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2013-05-02 1:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-01 14:25 [PATCH 1/2] xfs: Remove XFS_MOUNT_RETERR Jeff Liu
2013-05-02 1:12 ` Dave Chinner [this message]
2013-05-02 6:55 ` Jeff Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130502011211.GR10481@dastard \
--to=david@fromorbit.com \
--cc=jeff.liu@oracle.com \
--cc=tinguely@sgi.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox