From: Dwight Engen <dwight.engen@oracle.com>
To: Dave Chinner <david@fromorbit.com>
Cc: xfs@oss.sgi.com
Subject: [PATCH 2/3] xfstests 313: user namespace uid/gids in an inode
Date: Thu, 27 Jun 2013 12:03:34 -0400 [thread overview]
Message-ID: <20130627120334.0c4de386@oracle.com> (raw)
In-Reply-To: <20130626010931.GA29376@dastard>
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
---
tests/generic/313 | 107 ++++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/313.out | 20 ++++++++++
tests/generic/group | 1 +
3 files changed, 128 insertions(+)
create mode 100644 tests/generic/313
create mode 100644 tests/generic/313.out
diff --git a/tests/generic/313 b/tests/generic/313
new file mode 100644
index 0000000..0dd6213
--- /dev/null
+++ b/tests/generic/313
@@ -0,0 +1,107 @@
+#! /bin/bash
+# FS QA Test No. 313
+#
+# Check uid/gid to/from disk with a user namespace. A new file
+# will be created from inside a userns. We check that the uid/gid
+# is correct from both inside the userns and also from init_user_ns.
+# We will then unmount and remount the file system and check the
+# uid/gid from both inside the userns and from init_user_ns to show
+# that the correct uid was flushed and brought back from disk.
+#
+#-----------------------------------------------------------------------
+# Copyright (C) 2013 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+
+_cleanup()
+{
+ cd /
+ umount $SCRATCH_DEV >/dev/null 2>&1
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+
+nsexec=$here/src/nsexec
+lstat64=$here/src/lstat64
+file=$SCRATCH_MNT/file1
+
+# real QA test starts here
+_supported_fs generic
+# only Linux supports user namespace
+_supported_os Linux
+
+[ -x $nsexec ] || _notrun "$nsexec executable not found"
+[ -x $lstat64 ] || _notrun "$lstat64 executable not found"
+
+rm -f $seqres.full
+
+_require_scratch
+_need_to_be_root
+_require_user
+qa_user_id=`grep $qa_user /etc/passwd |awk -F: '{print $3}'`
+
+_filter_output()
+{
+ sed \
+ -e "s/$qa_user_id/qa_user/g" \
+ -e "s!$SCRATCH_MNT!\$SCRATCH_MNT!"
+}
+
+_print_numeric_uid()
+{
+ echo "From init_user_ns"
+ $here/src/lstat64 $file |head -3 |_filter_output
+
+ echo "From user_ns"
+ $nsexec -s -U -M "0 $qa_user_id 1000" -G "0 $qa_user_id 1000" $here/src/lstat64 $file |head -3 |_filter_output
+}
+
+umount $SCRATCH_DEV >/dev/null 2>&1
+echo "*** MKFS ***" >>$seqres.full
+echo "" >>$seqres.full
+_scratch_mkfs >>$seqres.full 2>&1 || _fail "mkfs failed"
+_scratch_mount >>$seqres.full 2>&1 || _fail "mount failed"
+chmod 777 $SCRATCH_MNT
+
+# create $file as "root" in userns, which is $qa_user in parent namespace
+$nsexec -s -U -M "0 $qa_user_id 1000" -G "0 $qa_user_id 1000" touch $file
+
+_print_numeric_uid
+
+echo ""
+echo "*** Remounting ***"
+echo ""
+sync
+umount $SCRATCH_MNT >>$seqres.full 2>&1
+_scratch_mount >>$seqres.full 2>&1 || _fail "mount failed"
+
+_print_numeric_uid
+
+umount $SCRATCH_DEV >/dev/null 2>&1
+status=0
+exit
diff --git a/tests/generic/313.out b/tests/generic/313.out
new file mode 100644
index 0000000..eab14c4
--- /dev/null
+++ b/tests/generic/313.out
@@ -0,0 +1,20 @@
+QA output created by 313
+From init_user_ns
+ File: "$SCRATCH_MNT/file1"
+ Size: 0 Filetype: Regular File
+ Mode: (0644/-rw-r--r--) Uid: (qa_user) Gid: (qa_user)
+From user_ns
+ File: "$SCRATCH_MNT/file1"
+ Size: 0 Filetype: Regular File
+ Mode: (0644/-rw-r--r--) Uid: (0) Gid: (0)
+
+*** Remounting ***
+
+From init_user_ns
+ File: "$SCRATCH_MNT/file1"
+ Size: 0 Filetype: Regular File
+ Mode: (0644/-rw-r--r--) Uid: (qa_user) Gid: (qa_user)
+From user_ns
+ File: "$SCRATCH_MNT/file1"
+ Size: 0 Filetype: Regular File
+ Mode: (0644/-rw-r--r--) Uid: (0) Gid: (0)
diff --git a/tests/generic/group b/tests/generic/group
index bd443c1..5c2b4d7 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -115,3 +115,4 @@
310 auto
311 auto metadata log
312 auto quick prealloc enospc
+313 auto metadata quick
--
1.8.1.4
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2013-06-27 16:03 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-25 19:34 [PATCH] xfstests: 313,314: user namespace uid/gids in inode, ACL Dwight Engen
2013-06-26 1:09 ` Dave Chinner
2013-06-26 16:30 ` Dwight Engen
2013-06-27 16:03 ` [PATCH 1/3] xfstests: add nsexec user namespace helper Dwight Engen
2013-08-19 14:10 ` Rich Johnston
2013-08-19 15:03 ` Rich Johnston
2013-06-27 16:03 ` Dwight Engen [this message]
2013-08-19 14:10 ` [PATCH 2/3] xfstests 313: user namespace uid/gids in an inode Rich Johnston
2013-08-19 15:03 ` Rich Johnston
2013-06-27 16:03 ` [PATCH 3/3] xfstests 314: user namespace uid/gids in an ACL Dwight Engen
2013-08-19 14:11 ` Rich Johnston
2013-08-19 17:34 ` Dwight Engen
2013-08-19 17:34 ` [PATCH v2] xfstests generic/318: " Dwight Engen
2013-08-19 20:49 ` Rich Johnston
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130627120334.0c4de386@oracle.com \
--to=dwight.engen@oracle.com \
--cc=david@fromorbit.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox