public inbox for linux-xfs@vger.kernel.org
 help / color / mirror / Atom feed
From: Brian Foster <bfoster@redhat.com>
To: Dave Chinner <david@fromorbit.com>
Cc: xfs@oss.sgi.com
Subject: Re: [PATCH 5/6] xfs: add log attributes for log lsn and grant head data
Date: Thu, 26 Jun 2014 08:29:29 -0400	[thread overview]
Message-ID: <20140626122928.GB37470@bfoster.bfoster> (raw)
In-Reply-To: <20140626045256.GY4453@dastard>

On Thu, Jun 26, 2014 at 02:52:56PM +1000, Dave Chinner wrote:
> On Fri, Jun 06, 2014 at 09:13:33AM -0400, Brian Foster wrote:
> > Create log attributes to export the current runtime state of the log to
> > sysfs. Note that the filesystem should be frozen for consistency across
> > attributes.
> > 
> > The following per-mount attributes are created: log_head_lsn,
> > log_tail_lsn, reserve_grant_head and write_grant_head. These represent
> > the physical log head, tail and reserve and write grant heads
> > respectively. Attribute values are exported in the following format:
> > 
> > 	"cycle:[block,byte]"
> > 
> > ... where cycle represents the log cycle and [block,bytes] represents
> > either the basic block or byte offset of the log, depending on the
> > attribute.  Log sequence number (LSN) values are encoded in basic blocks
> > and grant heads are encoded in bytes. All values are in decimal format.
> > 
> > Signed-off-by: Brian Foster <bfoster@redhat.com>
> > ---
> >  fs/xfs/xfs_sysfs.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 66 insertions(+)
> > 
> > diff --git a/fs/xfs/xfs_sysfs.c b/fs/xfs/xfs_sysfs.c
> > index f837527..fbd82d5 100644
> > --- a/fs/xfs/xfs_sysfs.c
> > +++ b/fs/xfs/xfs_sysfs.c
> > @@ -23,6 +23,9 @@
> >  #include "xfs_trans_resv.h"
> >  #include "xfs_ag.h"
> >  #include "xfs_mount.h"
> > +#include "xfs_log_format.h"
> > +#include "xfs_log.h"
> > +#include "xfs_log_priv.h"
> >  
> >  struct xfs_sysfs_attr {
> >  	struct attribute attr;
> > @@ -57,7 +60,70 @@ struct kobj_type xfs_mp_ktype = {
> >  
> >  /* xlog */
> >  
> > +STATIC ssize_t
> > +log_head_lsn_show(
> > +	char	*buf,
> > +	void	*data)
> > +{
> > +	struct xlog *log = data;
> > +	int ret;
> > +
> > +	spin_lock(&log->l_icloglock);
> > +	ret = snprintf(buf, PAGE_SIZE, "%d:%d\n", log->l_curr_cycle,
> > +			log->l_curr_block);
> > +	spin_unlock(&log->l_icloglock);
> 
> I'd keep the snprintf() outside the iclog lock, just so sampling
> perturbs behaviour as little as possible. i.e. use cycle/block
> locals as per all the others.
> 

Ok, will fix...

> Otherwise, looks good.
> 
> Reviewed-by: Dave Chinner <dchinner@redhat.com>
> 

Thanks!

Brian

> -- 
> Dave Chinner
> david@fromorbit.com

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

  reply	other threads:[~2014-06-26 12:29 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-06 13:13 [PATCH 0/6] xfs sysfs support Brian Foster
2014-06-06 13:13 ` [PATCH 1/6] xfs: fix a couple error sequence jumps in xfs_mountfs() Brian Foster
2014-06-26  4:10   ` Dave Chinner
2014-06-06 13:13 ` [PATCH 2/6] xfs: add a sysfs kset Brian Foster
2014-06-26  4:13   ` Dave Chinner
2014-06-06 13:13 ` [PATCH 3/6] xfs: add xfs_mount sysfs kobject Brian Foster
2014-06-26  4:29   ` Dave Chinner
2014-06-06 13:13 ` [PATCH 4/6] xfs: add xlog sysfs kobject and attribute handlers Brian Foster
2014-06-26  4:47   ` Dave Chinner
2014-06-26 12:28     ` Brian Foster
2014-06-26 13:41       ` Brian Foster
2014-06-06 13:13 ` [PATCH 5/6] xfs: add log attributes for log lsn and grant head data Brian Foster
2014-06-26  4:52   ` Dave Chinner
2014-06-26 12:29     ` Brian Foster [this message]
2014-06-06 13:13 ` [PATCH 6/6] xfs: document log sysfs attributes in testing ABI Brian Foster
2014-06-26  5:03   ` Dave Chinner
2014-06-26 12:30     ` Brian Foster

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140626122928.GB37470@bfoster.bfoster \
    --to=bfoster@redhat.com \
    --cc=david@fromorbit.com \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox