From: Brian Foster <bfoster@redhat.com>
To: Eric Sandeen <sandeen@sandeen.net>
Cc: "Carlos E. R." <carlos.e.r@opensuse.org>,
XFS mailing list <xfs@oss.sgi.com>
Subject: Re: Subject : Happened again, 20140811 -- Got "Internal error XFS_WANT_CORRUPTED_GOTO". Filesystem needs reformatting to correct issue.
Date: Tue, 12 Aug 2014 17:59:43 -0400 [thread overview]
Message-ID: <20140812215943.GA39704@bfoster.bfoster> (raw)
In-Reply-To: <53EA86DE.5060508@sandeen.net>
On Tue, Aug 12, 2014 at 02:27:58PM -0700, Eric Sandeen wrote:
> On 8/12/14, 9:51 AM, Brian Foster wrote:
> > On Tue, Aug 12, 2014 at 02:17:00AM +0200, Carlos E. R. wrote:
> > Content-ID: <alpine.LSU.2.11.1408120142170.21410@minas-tirith.valinor>
> >
> >
> > El 2014-08-12 a las 00:36 +0200, Carlos E. R. escribió:
> >>>> El 2014-08-11 a las 16:56 -0500, Mark Tinguely escribió:
> >
> >>>> but all of them are about 401M before compression. The upload will take
> >>>> long, my ADSL upload is 0.3M/s at most.
> >
> >
> > I have shared (view) on google drive a folder with the three files. Both
> > Brian Foster and Mark Tinguely should have got a link on the mail from me.
> > If somebody else wants access, just tell me.
> >
> >
> >> I see the same thing from repair that was in your repair output:
> >
> >> block (1,12608397-12608397) multiply claimed by cnt space tree, state - 2
> >
> >> If I take a look at the btrees as is, I see "235:[12608397,10]" included
> >> in the bnobt (fsb 0x200aa55) and "270:[12608397,10]" in the cntbt (fsb
> >> 0x2000781). If I skip the mount, zero the log and repair, everything
> >> seems Ok. I can allocate the remainder of available space and rm -rf
> >> everything in the fs without an error.
> >
> >> Once I replay the log, I see "272:[12608397,10] 273:[12608397,10]" in
> >> the cntbt, which is clearly a duplicate entry. This is what repair
> >> detects and cleans up and seems to lead to the shutdown. E.g., if I
> >> mount and use the fs, I can hit an assert or failure just by attempting
> >> to allocate the rest of the space in the fs. If that is the state of the
> >> fs on disk, it's only a matter of time we explode due to allocating and
> >> freeing that range of space or possibly attempting to allocate that
> >> space twice.
> >
> >> Mark mentioned that he didn't see the superblock item in the log with
> >> regard to the freeze. I don't see that either... which perhaps suggests
> >> that this all happens during the wake-from-hibernate sequence..? My
> >> understanding is that we should freeze on hibernate, thus force
> >> everything out to the log, write an unmount record and then dirty the
> >> log with a superblock transaction. Therefore, that should be the only
> >> item in the log post-freeze. Here, we have various items in the log
> >> including several logged buffers that correspond to the cntbt block that
> >> ends up corrupted (daddr 0xf427c08).
>
> What freeze? look at hibernate(), nothing but a sync:
>
> /**
> * hibernate - Carry out system hibernation, including saving the image.
> */
> int hibernate(void)
> {
> ...
> printk(KERN_INFO "PM: Syncing filesystems ... ");
> sys_sync();
> printk("done.\n");
>
> error = freeze_processes();
> if (error)
> goto Exit;
>
>
> AFAIK there is no freeze call involved.
>
Eep, not sure why I was thinking there was a freeze there. It appears
not. I guess that explains why the log contains what it does. Thanks for
pointing that out...
Brian
> -Eric
>
> _______________________________________________
> xfs mailing list
> xfs@oss.sgi.com
> http://oss.sgi.com/mailman/listinfo/xfs
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2014-08-12 21:59 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-02 9:57 Got "Internal error XFS_WANT_CORRUPTED_GOTO". Filesystem needs reformatting to correct issue Carlos E. R.
2014-07-02 12:04 ` Brian Foster
2014-07-02 13:07 ` Mark Tinguely
2014-07-03 2:54 ` Carlos E. R.
2014-07-03 3:00 ` Carlos E. R.
2014-07-03 9:43 ` Dave Chinner
2014-07-03 17:40 ` Brian Foster
2014-07-03 23:34 ` Carlos E. R.
2014-07-04 0:04 ` Dave Chinner
2014-07-04 1:29 ` Carlos E. R.
2014-07-04 1:40 ` Dave Chinner
2014-07-04 2:42 ` Carlos E. R.
2014-07-04 3:12 ` Carlos E. R.
2014-07-04 12:40 ` Brian Foster
2014-07-04 13:36 ` Carlos E. R.
2014-07-03 17:39 ` Brian Foster
2014-07-04 21:32 ` Carlos E. R.
2014-07-05 12:28 ` Brian Foster
2014-07-12 0:30 ` Carlos E. R.
2014-07-12 1:30 ` Carlos E. R.
2014-07-12 1:45 ` Carlos E. R.
2014-07-12 14:26 ` Brian Foster
2014-07-12 14:19 ` Brian Foster
2014-08-11 14:23 ` Subject : Happened again, 20140811 -- " Carlos E. R.
2014-08-11 14:44 ` Brian Foster
2014-08-11 14:58 ` Carlos E. R.
2014-08-11 17:05 ` Carlos E. R.
2014-08-11 21:31 ` Carlos E. R.
[not found] ` <53E938CC.4010103@sgi.com>
2014-08-11 22:01 ` Carlos E. R.
2014-08-11 14:57 ` Mark Tinguely
2014-08-11 15:34 ` Carlos E. R.
2014-08-11 16:14 ` Brian Foster
2014-08-11 17:08 ` Carlos E. R.
2014-08-11 21:27 ` Mark Tinguely
2014-08-11 21:50 ` Carlos E. R.
2014-08-11 21:56 ` Mark Tinguely
2014-08-11 22:36 ` Carlos E. R.
2014-08-12 0:17 ` Carlos E. R.
2014-08-12 16:51 ` Brian Foster
2014-08-12 21:17 ` Carlos E. R.
2014-08-13 12:04 ` Brian Foster
2014-08-13 13:29 ` Mark Tinguely
2014-08-13 21:04 ` Dave Chinner
2014-08-12 21:27 ` Eric Sandeen
2014-08-12 21:57 ` Dave Chinner
2014-08-12 21:59 ` Brian Foster [this message]
2014-08-12 22:21 ` Eric Sandeen
2014-08-12 23:16 ` Dave Chinner
2014-08-13 0:07 ` Carlos E. R.
2014-09-30 22:27 ` Happened again, 20140930 " Carlos E. R.
2014-10-01 0:45 ` Dave Chinner
2014-10-01 2:48 ` Carlos E. R.
2014-10-01 3:04 ` Eric Sandeen
2014-10-02 11:32 ` Jan Kara
2014-10-02 11:46 ` Carlos E. R.
2014-10-05 14:28 ` Carlos E. R.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140812215943.GA39704@bfoster.bfoster \
--to=bfoster@redhat.com \
--cc=carlos.e.r@opensuse.org \
--cc=sandeen@sandeen.net \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox