Repair XFS from 1/3 of the table

Repair XFS from 1/3 of the table

[Alessio Di Maria]

[-- Attachment #1.1: Type: text/plain, Size: 1587 bytes --]

Hi, for fist i'm sorry for my bad English..
so,
I'm trying to do a recovery from my NAS,
After it stopped, 3 disk of 4 was reinitialized so, raid partition was
deleted on disk 1 2 and 3, and first about 5m was zero filled..
I'm actually work on a copy of that...
in my luck, the XFS superblock was on 4th disk..
I was able to rebuild RAID5 with the original configuration and now i can
read RAW files up to few kb... i was able to read a 15Mb zip file, and some
big jpeg, so i can say that RAID it's working fine

At sector 384 of the raid volume start the xfs superblock, i made a
loopback at this offset,
mounting it.. but obviusly it said that was not clean.
making xfs_repair i get anything, but with xfs_repair -L i had infinite
list of lost inode, and than i was able to mount the partition,
but with any file, only the lost + found directory with few but complete
files...

On the NAS there were Big Files of ISCSI, in the lost + found i find one of
this, big 100Gb.. now i don't know how i can recovery the rest..

Is it possible to find lost inode?

i tryied with many programs to get back the original Filesystem but
anything up the Lost + Found directory after the repair...
I know that XFS is based on sparse file, and so i can't find my file and
hope to copy it contigusly (about 5Gb) cose the fs reidirect zero filled
zone... in addiction i can't do a RAW recovery cose in the deep of 2.7Tb i
find MFT entryies and system files inner ISCSI units...
So what chache?
Wha can i do myself?

I know that a DIY approach it this case is hard
Many Thaks in advance of any reponse!

[-- Attachment #1.2: Type: text/html, Size: 1911 bytes --]

[-- Attachment #2: Type: text/plain, Size: 121 bytes --]

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

Re: Repair XFS from 1/3 of the table

[Dave Chinner]

On Fri, Sep 19, 2014 at 10:58:49PM +0200, Alessio Di Maria wrote:
> Hi, for fist i'm sorry for my bad English..
> so,
> I'm trying to do a recovery from my NAS,
> After it stopped, 3 disk of 4 was reinitialized so, raid partition was
> deleted on disk 1 2 and 3, and first about 5m was zero filled..

So you lost the root inode and a lot of other critical metadata.

> I'm actually work on a copy of that...
> in my luck, the XFS superblock was on 4th disk..
> I was able to rebuild RAID5 with the original configuration and now i can
> read RAW files up to few kb... i was able to read a 15Mb zip file, and some
> big jpeg, so i can say that RAID it's working fine
> 
> At sector 384 of the raid volume start the xfs superblock, i made a
> loopback at this offset,
> mounting it.. but obviusly it said that was not clean.
> making xfs_repair i get anything, but with xfs_repair -L i had infinite
> list of lost inode, and than i was able to mount the partition,
> but with any file, only the lost + found directory with few but complete
> files...

That happens when you lose the root inode.

> On the NAS there were Big Files of ISCSI, in the lost + found i find one of
> this, big 100Gb.. now i don't know how i can recovery the rest..

If you had regions of of the drives zeroed, then you've lost data
randomly in the files in the filesystem. It's basically
unrecoverable if you don't have a backup.

> Is it possible to find lost inode?

You can google for xfs_irecover, but you've already run xfs_repair
and so it's going to be mostly useless at this point.

> i tryied with many programs to get back the original Filesystem but
> anything up the Lost + Found directory after the repair...
> I know that XFS is based on sparse file, and so i can't find my file and
> hope to copy it contigusly (about 5Gb) cose the fs reidirect zero filled
> zone... in addiction i can't do a RAW recovery cose in the deep of 2.7Tb i
> find MFT entryies and system files inner ISCSI units...
> So what chache?
> Wha can i do myself?

If xfs_repair hasn't recovered the inodes that contained the files
you care about, then it's almost certain that you've lost
those files forever unless you have a backup. You can try grepping
the raw device for sectors that contain signatures you care about,
but that only works for contiguous files that were lost (that's
effectively what photorec does).

Other than that, there's nothing that can be done to recover what
has been lost from the corpse you have on your hands...

Cheers,

Dave.
-- 
Dave Chinner
david@fromorbit.com

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs