From: Brian Foster <bfoster@redhat.com>
To: Dave Chinner <david@fromorbit.com>
Cc: willy@linux.intel.com, xfs@oss.sgi.com
Subject: Re: [PATCH 1/4] xfs: call dax_fault on read page faults for DAX
Date: Tue, 21 Jul 2015 07:50:24 -0400 [thread overview]
Message-ID: <20150721115022.GA23013@bfoster.bfoster> (raw)
In-Reply-To: <1437440945-23457-2-git-send-email-david@fromorbit.com>
On Tue, Jul 21, 2015 at 11:09:02AM +1000, Dave Chinner wrote:
> From: Dave Chinner <dchinner@redhat.com>
>
> When modifying the patch series to handle the XFS MMAP_LOCK nesting
> of page faults, I botched the conversion of the read page fault
> path, and so it is only every calling through the page cache. Re-add
> the necessary __dax_fault() call for such files.
>
> Because the get_blocks callback on read faults may not set up the
> mapping buffer correctly to allow unwritten extent completion to be
> run, we need to allow callers of __dax_fault() to pass a null
> complete_unwritten() callback. The DAX code always zeros the
> unwritten page when it is read faulted so there are no stale data
> exposure issues with not doing the conversion. The only downside
> will be the potential for increased CPU overhead on repeated read
> faults of the same page. If this proves to be a problem, then the
> filesystem needs to fix it's get_block callback and provide a
> convert_unwritten() callback to the read fault path.
>
> Signed-off-by: Dave Chinner <dchinner@redhat.com>
> ---
For the XFS bits:
Reviewed-by: Brian Foster <bfoster@redhat.com>
> fs/dax.c | 9 ++++++++-
> fs/xfs/xfs_file.c | 21 +++++++++++++++------
> 2 files changed, 23 insertions(+), 7 deletions(-)
>
> diff --git a/fs/dax.c b/fs/dax.c
> index c3e21cc..86d2cee 100644
> --- a/fs/dax.c
> +++ b/fs/dax.c
> @@ -319,6 +319,11 @@ static int dax_insert_mapping(struct inode *inode, struct buffer_head *bh,
> * @vma: The virtual memory area where the fault occurred
> * @vmf: The description of the fault
> * @get_block: The filesystem method used to translate file offsets to blocks
> + * @complete_unwritten: The filesystem method used to convert unwritten blocks
> + * to written so the data written to them is exposed. This is required for
> + * write faults, but optional for read faults as dax_insert_mapping() will
> + * always do the right thing on a read fault (i.e. zero the underlying
> + * page).
> *
> * When a page fault occurs, filesystems may call this helper in their
> * fault handler for DAX files. __dax_fault() assumes the caller has done all
> @@ -339,6 +344,8 @@ int __dax_fault(struct vm_area_struct *vma, struct vm_fault *vmf,
> int error;
> int major = 0;
>
> + WARN_ON_ONCE((vmf->flags & FAULT_FLAG_WRITE) && !complete_unwritten);
> +
> size = (i_size_read(inode) + PAGE_SIZE - 1) >> PAGE_SHIFT;
> if (vmf->pgoff >= size)
> return VM_FAULT_SIGBUS;
> @@ -437,7 +444,7 @@ int __dax_fault(struct vm_area_struct *vma, struct vm_fault *vmf,
> * as for normal BH based IO completions.
> */
> error = dax_insert_mapping(inode, &bh, vma, vmf);
> - if (buffer_unwritten(&bh))
> + if (buffer_unwritten(&bh) && complete_unwritten)
> complete_unwritten(&bh, !error);
>
> out:
> diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
> index f0e8249..db4acc1 100644
> --- a/fs/xfs/xfs_file.c
> +++ b/fs/xfs/xfs_file.c
> @@ -1514,18 +1514,27 @@ xfs_filemap_fault(
> struct vm_area_struct *vma,
> struct vm_fault *vmf)
> {
> - struct xfs_inode *ip = XFS_I(file_inode(vma->vm_file));
> + struct inode *inode = file_inode(vma->vm_file);
> int ret;
>
> - trace_xfs_filemap_fault(ip);
> + trace_xfs_filemap_fault(XFS_I(inode));
>
> /* DAX can shortcut the normal fault path on write faults! */
> - if ((vmf->flags & FAULT_FLAG_WRITE) && IS_DAX(VFS_I(ip)))
> + if ((vmf->flags & FAULT_FLAG_WRITE) && IS_DAX(inode))
> return xfs_filemap_page_mkwrite(vma, vmf);
>
> - xfs_ilock(ip, XFS_MMAPLOCK_SHARED);
> - ret = filemap_fault(vma, vmf);
> - xfs_iunlock(ip, XFS_MMAPLOCK_SHARED);
> + xfs_ilock(XFS_I(inode), XFS_MMAPLOCK_SHARED);
> + if (IS_DAX(inode)) {
> + /*
> + * we do not want to trigger unwritten extent conversion on read
> + * faults - that is unnecessary overhead and would also require
> + * changes to xfs_get_blocks_direct() to map unwritten extent
> + * ioend for conversion on read-only mappings.
> + */
> + ret = __dax_fault(vma, vmf, xfs_get_blocks_direct, NULL);
> + } else
> + ret = filemap_fault(vma, vmf);
> + xfs_iunlock(XFS_I(inode), XFS_MMAPLOCK_SHARED);
>
> return ret;
> }
> --
> 2.1.4
>
> _______________________________________________
> xfs mailing list
> xfs@oss.sgi.com
> http://oss.sgi.com/mailman/listinfo/xfs
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2015-07-21 11:50 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-21 1:09 [PATCH 0/4] xfs: various fixes Dave Chinner
2015-07-21 1:09 ` [PATCH 1/4] xfs: call dax_fault on read page faults for DAX Dave Chinner
2015-07-21 11:50 ` Brian Foster [this message]
2015-07-21 13:57 ` Matthew Wilcox
2015-07-24 1:31 ` [PATCH 1/4 v2] " Dave Chinner
2015-07-24 13:44 ` Matthew Wilcox
2015-07-21 1:09 ` [PATCH 2/4] xfs: remote attribute headers contain an invalid LSN Dave Chinner
2015-07-21 11:50 ` Brian Foster
2015-07-21 1:09 ` [PATCH 3/4] xfs: remote attributes need to be considered data Dave Chinner
2015-07-21 11:50 ` Brian Foster
2015-07-21 1:09 ` [PATCH 4/4] xfs: xfs_bunmapi() does not need XFS_BMAPI_METADATA flag Dave Chinner
2015-07-21 11:50 ` Brian Foster
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150721115022.GA23013@bfoster.bfoster \
--to=bfoster@redhat.com \
--cc=david@fromorbit.com \
--cc=willy@linux.intel.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox