* Re: [PATCH 3/3] ioctl_xfs_ioc_getfsmap.2: document XFS_IOC_GETFSMAP ioctl [not found] ` <32A3DAED-21FC-4252-B53E-3503764342E8@dilger.ca> @ 2016-08-30 19:09 ` Darrick J. Wong 2016-09-08 23:38 ` Dave Chinner 0 siblings, 1 reply; 7+ messages in thread From: Darrick J. Wong @ 2016-08-30 19:09 UTC (permalink / raw) To: Andreas Dilger Cc: linux-man, linux-api, xfs, linux-xfs, mtk.manpages, linux-fsdevel, linux-btrfs [add a few more relevant lists to cc] On Mon, Aug 29, 2016 at 03:34:11PM -0600, Andreas Dilger wrote: > On Aug 25, 2016, at 5:26 PM, Darrick J. Wong <darrick.wong@oracle.com> wrote: > > > > Document the new XFS_IOC_GETFSMAP ioctl that returns the physical > > layout of a (disk-based) filesystem. > > > > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> > > --- > > man2/ioctl_xfs_ioc_getfsmap.2 | 294 +++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 294 insertions(+) > > create mode 100644 man2/ioctl_xfs_ioc_getfsmap.2 > > > > > > diff --git a/man2/ioctl_xfs_ioc_getfsmap.2 b/man2/ioctl_xfs_ioc_getfsmap.2 > > new file mode 100644 > > index 0000000..0d9ed47 > > --- /dev/null > > +++ b/man2/ioctl_xfs_ioc_getfsmap.2 > > @@ -0,0 +1,294 @@ > > +.\" Copyright (c) 2016, Oracle. All rights reserved. > > +.\" > > +.\" %%%LICENSE_START(GPLv2+_DOC_FULL) > > +.\" This is free documentation; you can redistribute it and/or > > +.\" modify it under the terms of the GNU General Public License as > > +.\" published by the Free Software Foundation; either version 2 of > > +.\" the License, or (at your option) any later version. > > +.\" > > +.\" The GNU General Public License's references to "object code" > > +.\" and "executables" are to be interpreted as the output of any > > +.\" document formatting or typesetting system, including > > +.\" intermediate and printed output. > > +.\" > > +.\" This manual is distributed in the hope that it will be useful, > > +.\" but WITHOUT ANY WARRANTY; without even the implied warranty of > > +.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > +.\" GNU General Public License for more details. > > +.\" > > +.\" You should have received a copy of the GNU General Public > > +.\" License along with this manual; if not, see > > +.\" <http://www.gnu.org/licenses/>. > > +.\" %%%LICENSE_END > > +.TH IOCTL-XFS_IOC_GETFSMAP 2 2016-07-20 "Linux" "Linux Programmer's Manual" > > +.SH NAME > > +ioctl_xfs_ioc_getfsmap \- retrieve the physical layout of the filesystem > > +.SH SYNOPSIS > > +.br > > +.B #include <sys/ioctl.h> > > +.br > > +.B #include <linux/fs.h> > > +.sp > > +.BI "int ioctl(int " fd ", XFS_IOC_GETFSMAP, struct getfsmap * " arg ); > > +.SH DESCRIPTION > > +This > > +.BR ioctl (2) > > +retrieves physical extent mappings for a filesystem. > > +This information can be used to discover which files are mapped to a physical > > +block, examine free space, or find known bad blocks, among other things. > > + > > +The sole argument to this ioctl should be an array of the following > > +structure: > > +.in +4n > > +.nf > > + > > +struct getfsmap { > > + __u32 fmv_device; /* device id */ > > + __u32 fmv_unused1; /* future use, must be zero */ > > + __u64 fmv_block; /* starting block */ > > + __u64 fmv_owner; /* owner id */ > > + __u64 fmv_offset; /* file offset of segment */ > > + __u64 fmv_length; /* length of segment, blocks */ > > + __u32 fmv_oflags; /* mapping flags */ > > + __u32 fmv_iflags; /* control flags (1st structure) */ > > + __u32 fmv_count; /* # of entries in array incl. input */ > > + __u32 fmv_entries; /* # of entries filled in (output). */ > > + __u64 fmv_unused2; /* future use, must be zero */ > > +}; > > + > > +.fi > > +.in > > +The array must contain at least two elements. > > +The first two array elements specify the lowest and highest reverse-mapping > > +keys, respectively, for which userspace would like physical mapping > > +information. > > +A reverse mapping key consists of the tuple (device, block, owner, offset). > > +The owner and offset fields are part of the key because some filesystems > > +support sharing physical blocks between multiple files and > > +therefore may return multiple mappings for a given physical block. > > + > > +.SS Fields of struct getfsmap > > +.PP > > +The > > +.I fmv_device > > +field contains a 32-bit cookie to uniquely identify the underlying storage > > +device. > > +If the > > +.B FMV_HOF_DEV_T > > +flag is set in the header's > > +.I fmv_oflags > > +field, this field contains a dev_t from which major and minor numbers can > > +be extracted. > > +If the flag is not set, this field contains a value that must be unique > > +for each storage device. > > + > > +.PP > > +The > > +.I fmv_unused1 > > +field must be zero in the first two array elements. > > + > > +.PP > > +The > > +.I fmv_block > > +field contains the 512-byte sector address of the extent. > > Why would you use 512-byte sectors in a new interface? I started designing XFS GETFSMAP with the intent of making it feel familiar to anyone who'd already used the XFS GETBMAP interface. Hence you pass in an array of struct getfsmap[N] where the start of the array are key fields and the rest are filled out by the kernel, and the units are 512-byte blocks. As a result, some things (special owners in particular) are strongly influenced by XFS. Ofc then LSF happened and the btrfs developers expressed a desire to have a similar call, so now it's out for review on fsdevel. Now there's a question of whether or not we can create a generic enough interface to fit the major filesystems so as not to expose a bunch of balkanized fsmap ioctls to userspace. I also haven't heard much from the btrfs list in previous review cycles. (I say that more in reference to the 'special owners' below than any other part of GETFSMAP.) > I recall for FIEMAP that some filesystems may not have files aligned > to sector offsets, and we just used byte offsets. Storage like > NVDIMMs are cacheline granular, so I don't think it makes sense to > tie this to old disk sector sizes. Alternately, the units could be > in terms of fs blocks as returned by statvfs.st_bsize, but mixing > units for fmv_block, fmv_offset, fmv_length is uneeded complexity. Ugh. I'd rather just change the units to bytes rather than force all the users to multiply things. :) > > + > > +.PP > > +The > > +.I fmv_owner > > +field contains the owner of the extent. > > +This is generally an inode number, though if > > +.B FMV_OF_SPECIAL_OWNER > > +is set in the > > +.I fmv_oflags > > +field, then the owner value is one of the following special values: > > +.TP > > +.B FMV_OWN_FREE > > +Free space. > > +.TP > > +.B FMV_OWN_UNKNOWN > > +This extent has an unknown owner. > > +.TP > > +.B FMV_OWN_FS > > +Static filesystem metadata. "Static filesystem metadata. This information must exist at this disk address; on XFS, this is the AG superblock, AGF, AGI, and AGFL headers." > > +.TP > > +.B FMV_OWN_LOG > > +The filesystem journal. > > +.TP > > +.B FMV_OWN_AG > > +Allocation group metadata. "Allocation group metadata. On XFS these are the free space btrees and the reverse mapping btree." > > +.TP > > +.B FMV_OWN_INODES > > +Inodes. > > +.TP > > +.B FMV_OWN_DEFECTIVE: > > +This extent has been marked defective either by the filesystem or the > > +underlying device. > > These above ones are relatively clear what they are. The next items > are not very clear what they are, These all are very XFS-specific special owner codes; most of them correspond directly to the special owners in the XFS reverse-mapping structure. OWN_FS = AG superblock OWN_AG = free space and rmap btrees OWN_INODES = inode records OWN_INOBT = inode btree pointing to inode record blocks OWN_REFC = reference count btree OWN_COW = extent being used for a copy-on-write OWN_LOG = internal log For ext4, we could probably reuse the owner codes: OWN_FS = superblock + group descriptors OWN_AG = block/inode bitmaps OWN_INODES = inode table OWN_LOG = journal Granted, we could also just smush everything into OWN_METADATA such that the only special owners would be FREE, METADATA, COW, and DEFECTIVE. I don't like that because now the kernel decides to throw away information that userspace might be able to use, because I prefer more expressive APIs. Though I do see the counter-argument that userspace should not have direct access to metadata and therefore needn't know more than it's metadata. I'd much rather just add more special owner codes for any other filesystem that has distinguishable metadata types that are not covered by the existing OWN_ codes. We /do/ have 2^64 possible values, so it's not like we're going to run out. > and whether they need to be exported as specific items, or could > they just be lumped under "FMV_OWN_FS"? If they serve some specific > purpose, at a minimum they need better descriptions. > > > +.TP > > +.B FMV_OWN_INOBT > > +The inode index, if one is provided. "Inode indexing information. On XFS this is the inode btree and free inode btree." ? > > +.TP > > +.B FMV_OWN_REFC > > +Reference counting indexes. "Reference count information. On XFS this is the refcount btree." ? > > +.TP > > +.B FMV_OWN_COW > > +This extent is being used to stage a copy-on-write. I'm not sure if you found this description to be lacking; I think it's fine. > > + > > +.PP > > +The > > +.I fmv_offset > > +field contains the logical address of the reverse mapping record, in units > > +of 512-byte blocks. > > +This field has no meaning if the > > +.BR FMV_OF_SPECIAL_OWNER " or " FMV_OF_EXTENT_MAP > > +flags are set in > > +.IR fmv_oflags "." > > + > > +.PP > > +The > > +.I fmv_length > > +field contains the length of the extent, in units of 512-byte blocks. > > +This field must be zero in the second array element. > > + > > +.PP > > +The > > +.I fmv_oflags > > +field is a bitmask of extent state flags. > > +In the header, the bits are: > > +.TP > > +.B FMV_HOF_DEV_T > > +All > > +.I fmv_device > > +values will be in dev_t format. > > +If this flag is not set, the value is merely a 32-bit cookie that will be > > +unique for each physical device. > > +.TP > > +In a non-header, the bits are: > > +.TP > > +.B FMV_OF_PREALLOC > > +The extent is allocated but not yet written. > > +.TP > > +.B FMV_OF_ATTR_FORK > > +This extent contains extended attribute data. > > +.TP > > +.B FMV_OF_EXTENT_MAP > > +This extent contains extent map information for the owner. > > +.TP > > +.B FMV_OF_SHARED > > +Parts of this extent may be shared. > > +.TP > > +.B FMV_OF_SPECIAL_OWNER > > +The > > +.I fmv_owner > > +field contains a special value instead of an inode number. > > +.TP > > +.B FMV_OF_LAST > > +This is the last record in the filesystem. > > + > > +.PP > > +The > > +.I fmv_iflags > > +field is a bitmask passed to the kernel to alter the output. > > +There are no flags defined, so this value must be zero in the first > > +two array elements. > > It seems like there are several fields in the structure that are used for > only input or only output? Does it make more sense to have one structure > used only for the input request, and then the array of values returned be > in a different structure? I'm not necessarily requesting that it be changed, > but it definitely is something I noticed a few times while reading this doc. I've been thinking about rearranging this a bit, since the flags handling is very awkward with the current array structure. Each rmap has its own flags; we may someday want to pass operation flags into the ioctl; and we currently have one operation flag to pass back to userspace. Each of those flags can be a separate field. I think people will get confused about FMV_OF_* and FMV_HOF_* being referenced in oflags, and iflags has no meaning for returned records. So, this instead? struct getfsmap_rec { u32 device; /* device id */ u32 flags; /* mapping flags */ u64 block; /* physical addr, bytes */ u64 owner; /* inode or special owner code */ u64 offset; /* file offset of mapping, bytes */ u64 length; /* length of segment, bytes */ u64 reserved; /* will be set to zero */ }; /* 48 bytes */ struct getfsmap_head { u32 iflags; /* none defined yet */ u32 oflags; /* FMV_HOF_DEV_T */ u32 count; /* # entries in recs array */ u32 entries; /* # entries filled in (output) */ u64 reserved[2]; /* must be zero */ struct getfsmap_rec keys[2]; /* low and high keys for the mapping search */ struct getfsmap_rec recs[0]; }; /* 32 bytes + 2*48 = 128 bytes */ #define XFS_IOC_GETFSMAP _IOWR('X', 59, struct getfsmap_head) This also means that userspace can set up for the next ioctl invocation with memcpy(&head->keys[0], &head->recs[head->entries - 1]). Yes, I think I like this better. Everyone else, please chime in. :) --D > Cheers, Andreas > > > +.PP > > +The > > +.I fmv_count > > +field contains the number of elements in the array being passed to the > > +kernel. > > +This count must include the two control elements at the start of the > > +array. > > +The value must be specified in the first array element; in the second > > +element this field must be zero. > > + > > +If this value is 2, > > +.I fmv_entries > > +will be set to the number of records that would have been returned had > > +the array been large enough; > > +no extent information will be returned. > > + > > +.PP > > +The > > +.I fmv_entries > > +field contains the number of elements in the array that contain useful > > +information if the ioctl returns a non-error value. > > +This value does not include the two control elements at the start of the array. > > +This value is only set in the first array element; > > +in the second element, this field must be zero. > > + > > +.PP > > +The > > +.I fmv_unused2 > > +field must be zero in the first two array elements. > > + > > +.SS Array Elements > > +.PP > > +The key fields (fmv_device, fmv_block, fmv_owner, fmv_offset) of the first > > +element of the array specify the lowest extent record in the keyspace that > > +the caller wants returned. > > +For example, if the key is set to (0, 36, 0, 0), the filesystem will > > +only return records for extents starting at or above sector 36 on > > +disk. > > +For convenience, the > > +.I fmv_length > > +field will be added to the > > +.IR fmv_block " and " fmv_offset > > +fields as appropriate so that the (fmv_device, fmv_block, fmv_owner, > > +fmv_offset, fmv_length) fields in the last array element can be copied > > +into the first element to seed the next ioctl call. > > + > > +The key fields of the second element of the array specify the highest > > +extent record in the keyspace that the caller wants returned. > > +Returning to our example above, if that example key were instead > > +passed in via the second array element, the filesystem will not return > > +records for extents going past sector 36 on disk. > > +For convenience, the four key fields can be set to ~0 (all ones) to > > +signify "end of filesystem". > > + > > +If > > +.I fmv_count > > +in the first element of the array is 2, then > > +.I fmv_entries > > +in the first element of the array will be set to the number of extent > > +records found in the filesystem. > > +Otherwise, > > +.I fmv_entries > > +will be set to the number of extents actually returned, and the subsequent > > +array elements will be filled out with extent information. > > +In these > > +subsequent array elements, the fields > > +.IR fmv_iflags ", " fmv_count ", " fmv_entries ", and " fmv_unused1 > > +will be set to zero by the filesystem. > > + > > +.SH RETURN VALUE > > +On error, \-1 is returned, and > > +.I errno > > +is set to indicate the error. > > +.PP > > +.SH ERRORS > > +Error codes can be one of, but are not limited to, the following: > > +.TP > > +.B EINVAL > > +The array is not long enough, or a non-zero value was passed in one of the > > +fields that must be zero. > > +.TP > > +.B EFAULT > > +The pointer passed in was not mapped to a valid memory address. > > +.TP > > +.B EBADF > > +.IR fd > > +is not open for reading. > > +.TP > > +.B EPERM > > +This query is not allowed. > > +.TP > > +.B EOPNOTSUPP > > +The filesystem does not support this command. > > + > > +.SH CONFORMING TO > > +This API is Linux-specific. > > +Not all filesystems support it. > > +.fi > > +.in > > +.SH SEE ALSO > > +.BR ioctl (2) > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > Cheers, Andreas > > > > > _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 3/3] ioctl_xfs_ioc_getfsmap.2: document XFS_IOC_GETFSMAP ioctl 2016-08-30 19:09 ` [PATCH 3/3] ioctl_xfs_ioc_getfsmap.2: document XFS_IOC_GETFSMAP ioctl Darrick J. Wong @ 2016-09-08 23:38 ` Dave Chinner 2016-09-09 6:07 ` Darrick J. Wong 0 siblings, 1 reply; 7+ messages in thread From: Dave Chinner @ 2016-09-08 23:38 UTC (permalink / raw) To: Darrick J. Wong Cc: Andreas Dilger, linux-man, linux-api, xfs, linux-xfs, mtk.manpages, linux-fsdevel, linux-btrfs On Tue, Aug 30, 2016 at 12:09:49PM -0700, Darrick J. Wong wrote: > > I recall for FIEMAP that some filesystems may not have files aligned > > to sector offsets, and we just used byte offsets. Storage like > > NVDIMMs are cacheline granular, so I don't think it makes sense to > > tie this to old disk sector sizes. Alternately, the units could be > > in terms of fs blocks as returned by statvfs.st_bsize, but mixing > > units for fmv_block, fmv_offset, fmv_length is uneeded complexity. > > Ugh. I'd rather just change the units to bytes rather than force all > the users to multiply things. :) Yup, units need to be either in disk addresses (i.e. 512 byte units) or bytes. If people can't handle disk addresses (seems to be the case), the bytes it should be. > I'd much rather just add more special owner codes for any other > filesystem that has distinguishable metadata types that are not > covered by the existing OWN_ codes. We /do/ have 2^64 possible > values, so it's not like we're going to run out. This is diagnositc information as much as anything, just like fiemap is diagnostic information. So if we have specific type information, it needs to be reported accurately to be useful. Hence I really don't care if the users and developers of other fs types don't understand what the special owner codes that a specific filesystem returns mean. i.e. it's not useful user information - only a tool that groks the specific filesystem is going to be able to anything useful with special owner codes. So, IMO, there's little point trying to make them generic or to even trying to define and explain them in the man page.... > > It seems like there are several fields in the structure that are used for > > only input or only output? Does it make more sense to have one structure > > used only for the input request, and then the array of values returned be > > in a different structure? I'm not necessarily requesting that it be changed, > > but it definitely is something I noticed a few times while reading this doc. > > I've been thinking about rearranging this a bit, since the flags > handling is very awkward with the current array structure. Each > rmap has its own flags; we may someday want to pass operation flags > into the ioctl; and we currently have one operation flag to pass back > to userspace. Each of those flags can be a separate field. I think > people will get confused about FMV_OF_* and FMV_HOF_* being referenced > in oflags, and iflags has no meaning for returned records. Yup, that's what I initially noticed when I glanced at this. The XFS getbmap interface is just plain nasty, and we shouldn't be copying that API pattern if we can help it. > So, this instead? > > struct getfsmap_rec { > u32 device; /* device id */ > u32 flags; /* mapping flags */ > u64 block; /* physical addr, bytes */ > u64 owner; /* inode or special owner code */ > u64 offset; /* file offset of mapping, bytes */ > u64 length; /* length of segment, bytes */ > u64 reserved; /* will be set to zero */ > }; /* 48 bytes */ > > struct getfsmap_head { > u32 iflags; /* none defined yet */ > u32 oflags; /* FMV_HOF_DEV_T */ > u32 count; /* # entries in recs array */ > u32 entries; /* # entries filled in (output) */ > u64 reserved[2]; /* must be zero */ > > struct getfsmap_rec keys[2]; /* low and high keys for the mapping search */ > struct getfsmap_rec recs[0]; > }; /* 32 bytes + 2*48 = 128 bytes */ > > #define XFS_IOC_GETFSMAP _IOWR('X', 59, struct getfsmap_head) > > This also means that userspace can set up for the next ioctl > invocation with memcpy(&head->keys[0], &head->recs[head->entries - 1]). > > Yes, I think I like this better. Everyone else, please chime in. :) That's pretty much the structure I was going to suggest - it matches the fiemap pattern. i.e control parameters are separated from record data. I'd dump a bit more reserved space in the structure, though; we've got heaps of flag space for future expansion, but if we need to pass new parameters into/out of the kernel we'll quickly use the reserved space. Cheers, Dave. -- Dave Chinner david@fromorbit.com _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 3/3] ioctl_xfs_ioc_getfsmap.2: document XFS_IOC_GETFSMAP ioctl 2016-09-08 23:38 ` Dave Chinner @ 2016-09-09 6:07 ` Darrick J. Wong 2016-09-10 0:00 ` Dave Chinner 0 siblings, 1 reply; 7+ messages in thread From: Darrick J. Wong @ 2016-09-09 6:07 UTC (permalink / raw) To: Dave Chinner Cc: Andreas Dilger, linux-man, linux-api, xfs, linux-xfs, mtk.manpages, linux-fsdevel, linux-btrfs On Fri, Sep 09, 2016 at 09:38:06AM +1000, Dave Chinner wrote: > On Tue, Aug 30, 2016 at 12:09:49PM -0700, Darrick J. Wong wrote: > > > I recall for FIEMAP that some filesystems may not have files aligned > > > to sector offsets, and we just used byte offsets. Storage like > > > NVDIMMs are cacheline granular, so I don't think it makes sense to > > > tie this to old disk sector sizes. Alternately, the units could be > > > in terms of fs blocks as returned by statvfs.st_bsize, but mixing > > > units for fmv_block, fmv_offset, fmv_length is uneeded complexity. > > > > Ugh. I'd rather just change the units to bytes rather than force all > > the users to multiply things. :) > > Yup, units need to be either in disk addresses (i.e. 512 byte units) > or bytes. If people can't handle disk addresses (seems to be the > case), the bytes it should be. <nod> > > I'd much rather just add more special owner codes for any other > > filesystem that has distinguishable metadata types that are not > > covered by the existing OWN_ codes. We /do/ have 2^64 possible > > values, so it's not like we're going to run out. > > This is diagnositc information as much as anything, just like > fiemap is diagnostic information. So if we have specific type > information, it needs to be reported accurately to be useful. > > Hence I really don't care if the users and developers of other fs > types don't understand what the special owner codes that a specific > filesystem returns mean. i.e. it's not useful user information - > only a tool that groks the specific filesystem is going to be able > to anything useful with special owner codes. So, IMO, there's little > point trying to make them generic or to even trying to define and > explain them in the man page.... <shrug> I'm ok with describing generally what each special owner code means. Maybe the manpage could be more explicit about "None of these codes are useful unless you're a low level filesystem tool"? > > > It seems like there are several fields in the structure that are used for > > > only input or only output? Does it make more sense to have one structure > > > used only for the input request, and then the array of values returned be > > > in a different structure? I'm not necessarily requesting that it be changed, > > > but it definitely is something I noticed a few times while reading this doc. > > > > I've been thinking about rearranging this a bit, since the flags > > handling is very awkward with the current array structure. Each > > rmap has its own flags; we may someday want to pass operation flags > > into the ioctl; and we currently have one operation flag to pass back > > to userspace. Each of those flags can be a separate field. I think > > people will get confused about FMV_OF_* and FMV_HOF_* being referenced > > in oflags, and iflags has no meaning for returned records. > > Yup, that's what I initially noticed when I glanced at this. The XFS > getbmap interface is just plain nasty, and we shouldn't be copying > that API pattern if we can help it. Lol ok. :) > > So, this instead? > > > > struct getfsmap_rec { > > u32 device; /* device id */ > > u32 flags; /* mapping flags */ > > u64 block; /* physical addr, bytes */ > > u64 owner; /* inode or special owner code */ > > u64 offset; /* file offset of mapping, bytes */ > > u64 length; /* length of segment, bytes */ > > u64 reserved; /* will be set to zero */ > > }; /* 48 bytes */ > > > > struct getfsmap_head { > > u32 iflags; /* none defined yet */ > > u32 oflags; /* FMV_HOF_DEV_T */ > > u32 count; /* # entries in recs array */ > > u32 entries; /* # entries filled in (output) */ > > u64 reserved[2]; /* must be zero */ > > > > struct getfsmap_rec keys[2]; /* low and high keys for the mapping search */ > > struct getfsmap_rec recs[0]; > > }; /* 32 bytes + 2*48 = 128 bytes */ > > > > #define XFS_IOC_GETFSMAP _IOWR('X', 59, struct getfsmap_head) > > > > This also means that userspace can set up for the next ioctl > > invocation with memcpy(&head->keys[0], &head->recs[head->entries - 1]). > > > > Yes, I think I like this better. Everyone else, please chime in. :) > > That's pretty much the structure I was going to suggest - it matches > the fiemap pattern. i.e control parameters are separated from record > data. I'd dump a bit more reserved space in the structure, though; > we've got heaps of flag space for future expansion, but if we need > to pass new parameters into/out of the kernel we'll quickly use the > reserved space. I padded struct fsmap with enough reserved space to make it an even 64 bytes, and padded struct fsmap_head so that the space before keys is 64 bytes in length. See v3 patch of the ioctl manpage. --D > > Cheers, > > Dave. > -- > Dave Chinner > david@fromorbit.com _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 3/3] ioctl_xfs_ioc_getfsmap.2: document XFS_IOC_GETFSMAP ioctl 2016-09-09 6:07 ` Darrick J. Wong @ 2016-09-10 0:00 ` Dave Chinner 2016-09-11 18:56 ` Darrick J. Wong 0 siblings, 1 reply; 7+ messages in thread From: Dave Chinner @ 2016-09-10 0:00 UTC (permalink / raw) To: Darrick J. Wong Cc: Andreas Dilger, linux-man, linux-api, xfs, linux-xfs, mtk.manpages, linux-fsdevel, linux-btrfs On Thu, Sep 08, 2016 at 11:07:16PM -0700, Darrick J. Wong wrote: > On Fri, Sep 09, 2016 at 09:38:06AM +1000, Dave Chinner wrote: > > On Tue, Aug 30, 2016 at 12:09:49PM -0700, Darrick J. Wong wrote: > > > > I recall for FIEMAP that some filesystems may not have files aligned > > > > to sector offsets, and we just used byte offsets. Storage like > > > > NVDIMMs are cacheline granular, so I don't think it makes sense to > > > > tie this to old disk sector sizes. Alternately, the units could be > > > > in terms of fs blocks as returned by statvfs.st_bsize, but mixing > > > > units for fmv_block, fmv_offset, fmv_length is uneeded complexity. > > > > > > Ugh. I'd rather just change the units to bytes rather than force all > > > the users to multiply things. :) > > > > Yup, units need to be either in disk addresses (i.e. 512 byte units) > > or bytes. If people can't handle disk addresses (seems to be the > > case), the bytes it should be. > > <nod> > > > > I'd much rather just add more special owner codes for any other > > > filesystem that has distinguishable metadata types that are not > > > covered by the existing OWN_ codes. We /do/ have 2^64 possible > > > values, so it's not like we're going to run out. > > > > This is diagnositc information as much as anything, just like > > fiemap is diagnostic information. So if we have specific type > > information, it needs to be reported accurately to be useful. > > > > Hence I really don't care if the users and developers of other fs > > types don't understand what the special owner codes that a specific > > filesystem returns mean. i.e. it's not useful user information - > > only a tool that groks the specific filesystem is going to be able > > to anything useful with special owner codes. So, IMO, there's little > > point trying to make them generic or to even trying to define and > > explain them in the man page.... > > <shrug> I'm ok with describing generally what each special owner code > means. Maybe the manpage could be more explicit about "None of these > codes are useful unless you're a low level filesystem tool"? You can add that, but it doesn't address the underlying problem. i.e. that we can add/change the codes, their name, meaning, etc, and now there's a third party man page that is incorrect and out of date. It's the same problem with documenting filesystem specific mount options in mount(8). Better, IMO, is to simple say "refer to filesystem specific documentation for a description of these special values". e.g. refer them to the XFS Filesystem Structure document where this is all spelled out in enough detail to be useful for someone thinking that they might want to use them.... Cheers, Dave. -- Dave Chinner david@fromorbit.com _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 3/3] ioctl_xfs_ioc_getfsmap.2: document XFS_IOC_GETFSMAP ioctl 2016-09-10 0:00 ` Dave Chinner @ 2016-09-11 18:56 ` Darrick J. Wong 0 siblings, 0 replies; 7+ messages in thread From: Darrick J. Wong @ 2016-09-11 18:56 UTC (permalink / raw) To: Dave Chinner Cc: Andreas Dilger, linux-man, linux-api, xfs, linux-xfs, mtk.manpages, linux-fsdevel, linux-btrfs On Sat, Sep 10, 2016 at 10:00:29AM +1000, Dave Chinner wrote: > On Thu, Sep 08, 2016 at 11:07:16PM -0700, Darrick J. Wong wrote: > > On Fri, Sep 09, 2016 at 09:38:06AM +1000, Dave Chinner wrote: > > > On Tue, Aug 30, 2016 at 12:09:49PM -0700, Darrick J. Wong wrote: > > > > > I recall for FIEMAP that some filesystems may not have files aligned > > > > > to sector offsets, and we just used byte offsets. Storage like > > > > > NVDIMMs are cacheline granular, so I don't think it makes sense to > > > > > tie this to old disk sector sizes. Alternately, the units could be > > > > > in terms of fs blocks as returned by statvfs.st_bsize, but mixing > > > > > units for fmv_block, fmv_offset, fmv_length is uneeded complexity. > > > > > > > > Ugh. I'd rather just change the units to bytes rather than force all > > > > the users to multiply things. :) > > > > > > Yup, units need to be either in disk addresses (i.e. 512 byte units) > > > or bytes. If people can't handle disk addresses (seems to be the > > > case), the bytes it should be. > > > > <nod> > > > > > > I'd much rather just add more special owner codes for any other > > > > filesystem that has distinguishable metadata types that are not > > > > covered by the existing OWN_ codes. We /do/ have 2^64 possible > > > > values, so it's not like we're going to run out. > > > > > > This is diagnositc information as much as anything, just like > > > fiemap is diagnostic information. So if we have specific type > > > information, it needs to be reported accurately to be useful. > > > > > > Hence I really don't care if the users and developers of other fs > > > types don't understand what the special owner codes that a specific > > > filesystem returns mean. i.e. it's not useful user information - > > > only a tool that groks the specific filesystem is going to be able > > > to anything useful with special owner codes. So, IMO, there's little > > > point trying to make them generic or to even trying to define and > > > explain them in the man page.... > > > > <shrug> I'm ok with describing generally what each special owner code > > means. Maybe the manpage could be more explicit about "None of these > > codes are useful unless you're a low level filesystem tool"? > > You can add that, but it doesn't address the underlying problem. > i.e. that we can add/change the codes, their name, meaning, etc, > and now there's a third party man page that is incorrect and out of > date. It's the same problem with documenting filesystem specific > mount options in mount(8). Better, IMO, is to simple say "refer to > filesystem specific documentation for a description of these special > values". e.g. refer them to the XFS Filesystem Structure > document where this is all spelled out in enough detail to be useful > for someone thinking that they might want to use them.... We could simply put a manpage in the xfsprogs source documenting the XFS owner codes and let other implementers make their own manpage with a discussion of the owner codes (and whatever other quirks they have). Sort of fragments things, but that's probably unavoidable. :) --D > > Cheers, > > Dave. > -- > Dave Chinner > david@fromorbit.com ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v2 3/3] ioctl_getfsmap.2: document the GETFSMAP ioctl [not found] ` <147216760214.32321.8331561706153372268.stgit@birch.djwong.org> [not found] ` <32A3DAED-21FC-4252-B53E-3503764342E8@dilger.ca> @ 2016-09-04 5:36 ` Darrick J. Wong 2016-09-09 6:17 ` [PATCH v3 " Darrick J. Wong 2 siblings, 0 replies; 7+ messages in thread From: Darrick J. Wong @ 2016-09-04 5:36 UTC (permalink / raw) To: mtk.manpages Cc: linux-man, linux-api, xfs, linux-xfs, Andreas Dilger, linux-fsdevel, linux-btrfs Document the new GETFSMAP ioctl that returns the physical layout of a (disk-based) filesystem. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> --- man2/ioctl_getfsmap.2 | 313 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 313 insertions(+) create mode 100644 man2/ioctl_getfsmap.2 diff --git a/man2/ioctl_getfsmap.2 b/man2/ioctl_getfsmap.2 new file mode 100644 index 0000000..99de417 --- /dev/null +++ b/man2/ioctl_getfsmap.2 @@ -0,0 +1,313 @@ +.\" Copyright (c) 2016, Oracle. All rights reserved. +.\" +.\" %%%LICENSE_START(GPLv2+_DOC_FULL) +.\" This is free documentation; you can redistribute it and/or +.\" modify it under the terms of the GNU General Public License as +.\" published by the Free Software Foundation; either version 2 of +.\" the License, or (at your option) any later version. +.\" +.\" The GNU General Public License's references to "object code" +.\" and "executables" are to be interpreted as the output of any +.\" document formatting or typesetting system, including +.\" intermediate and printed output. +.\" +.\" This manual is distributed in the hope that it will be useful, +.\" but WITHOUT ANY WARRANTY; without even the implied warranty of +.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.\" GNU General Public License for more details. +.\" +.\" You should have received a copy of the GNU General Public +.\" License along with this manual; if not, see +.\" <http://www.gnu.org/licenses/>. +.\" %%%LICENSE_END +.TH IOCTL-GETFSMAP 2 2016-09-03 "Linux" "Linux Programmer's Manual" +.SH NAME +ioctl_getfsmap \- retrieve the physical layout of the filesystem +.SH SYNOPSIS +.br +.B #include <sys/ioctl.h> +.br +.B #include <linux/fs.h> +.sp +.BI "int ioctl(int " fd ", GETFSMAP, struct fsmap_head * " arg ); +.SH DESCRIPTION +This +.BR ioctl (2) +retrieves physical extent mappings for a filesystem. +This information can be used to discover which files are mapped to a physical +block, examine free space, or find known bad blocks, among other things. + +The sole argument to this ioctl should be a pointer to a single +.BR "struct fsmap_head" ":" +.in +4n +.nf + +struct fsmap { + __u32 fmr_device; /* device id */ + __u32 fmr_flags; /* mapping flags */ + __u64 fmr_physical; /* device offset of segment */ + __u64 fmr_owner; /* owner id */ + __u64 fmr_offset; /* file offset of segment */ + __u64 fmr_length; /* length of segment */ + __u64 fmr_reserved; /* future use, must be zero */ +}; + +struct fsmap_head { + __u32 fmh_iflags; /* control flags */ + __u32 fmh_oflags; /* output flags */ + __u32 fmh_count; /* # of entries in array incl. input */ + __u32 fmh_entries; /* # of entries filled in (output). */ + __u64 fmh_reserved[2]; /* must be zero */ + + struct fsmap fmh_keys[2]; /* low and high keys for the mapping search */ + struct fsmap fmh_recs[0]; /* returned records */ +}; + +.fi +.in +The two +.I fmh_keys +array elements specify the lowest and highest reverse-mapping +keys, respectively, for which userspace would like physical mapping +information. +A reverse mapping key consists of the tuple (device, block, owner, offset). +The owner and offset fields are part of the key because some filesystems +support sharing physical blocks between multiple files and +therefore may return multiple mappings for a given physical block. +.PP +Filesystem mappings are copied into the +.I fmh_recs +array, which immediately follows the header data. +.SS Fields of struct fsmap_head +.PP +The +.I fmh_iflags +field is a bitmask passed to the kernel to alter the output. +There are no flags defined, so this value must be zero. + +.PP +The +.I fmh_oflags +field is a bitmask of flags that concern all output mappings. +If +.B FMH_OF_DEV_T +is set, then the +.I fmr_device +field represents a +.B dev_t +structure containing the major and minor numbers of the block device. + +.PP +The +.I fmh_count +field contains the number of elements in the array being passed to the +kernel. +If this value is 0, +.I fmh_entries +will be set to the number of records that would have been returned had +the array been large enough; +no mapping information will be returned. + +.PP +The +.I fmh_entries +field contains the number of elements in the +.I fmh_recs +array that contain useful information. + +.PP +The +.I fmh_reserved +fields must be set to zero. + +.SS Keys +.PP +The two key records in +.B fsmap_head.fmh_keys +specify the lowest and highest extent records in the keyspace that the caller +wants returned. +A filesystem that can share blocks between files likely requires the tuple +.RI "(" "device" ", " "physical" ", " "owner" ", " "offset" ", " "flags" ")" +to uniquely index any filesystem mapping record. +Classic non-sharing filesystems might be able to identify any record with only +.RI "(" "device" ", " "physical" ", " "flags" ")." +For example, if the low key is set to (0, 36864, 0, 0, 0), the filesystem will +only return records for extents starting at or above 36KiB on disk. +If the high key is set to (0, 1048576, 0, 0, 0), only records below 1MiB will +be returned. +By convention, the field +.B fsmap_head.fmh_keys[0] +must contain the low key and +.B fsmap_head.fmh_keys[1] +must contain the high key for the request. +.PP +For convenience, if +.B fmr_length +is set in the low key, it will be added to +.IR fmr_block " or " fmr_offset +as appropriate. +The caller can take advantage of this subtlety to set up subsequent calls +by copying +.B fsmap_head.fmh_recs[fsmap_head.fmh_entries - 1] +into the low key. + +.SS Fields of struct fsmap +.PP +The +.I fmr_device +field contains a 32-bit cookie to uniquely identify the underlying storage +device. +If the +.B FMH_OF_DEV_T +flag is set in the header's +.I fmh_oflags +field, this field contains a +.B dev_t +from which major and minor numbers can be extracted. +If the flag is not set, this field contains a value that must be unique +for each unique storage device. + +.PP +The +.I fmr_physical +field contains the disk address of the extent in bytes. + +.PP +The +.I fmr_owner +field contains the owner of the extent. +This is an inode number unless +.B FMR_OF_SPECIAL_OWNER +is set in the +.I fmr_flags +field, in which case the owner value is one of the following special values: +.RS 0.4i +.TP +.B FMR_OWN_FREE +Free space. +.TP +.B FMR_OWN_UNKNOWN +This extent has an unknown owner. +.TP +.B FMR_OWN_FS +Static filesystem metadata which exists at a fixed address. +On XFS these are the AG superblock, AGF, AGFL, and AGI headers. +.TP +.B FMR_OWN_LOG +The filesystem journal. +.TP +.B FMR_OWN_AG +Allocation group metadata. +On XFS these are the free space btrees or the reverse mapping btrees. +.TP +.B FMR_OWN_INOBT +Inode indexing, if any are provided. +On XFS these are the inode and free inode btrees. +.TP +.B FMR_OWN_INODES +Inode records. +.TP +.B FMR_OWN_REFC +Reference count information. +On XFS this is the reference count btree. +.TP +.B FMR_OWN_COW +This extent is being used to stage a copy-on-write. +.TP +.B FMR_OWN_DEFECTIVE: +This extent has been marked defective either by the filesystem or the +underlying device. +.RE + +.PP +The +.I fmr_offset +field contains the logical address in the mapping record in bytes. +This field has no meaning if the +.BR FMR_OF_SPECIAL_OWNER " or " FMR_OF_EXTENT_MAP +flags are set in +.IR fmr_flags "." + +.PP +The +.I fmr_length +field contains the length of the extent in bytes. + +.PP +The +.I fmr_flags +field is a bitmask of extent state flags. +The bits are: +.RS 0.4i +.TP +.B FMR_OF_PREALLOC +The extent is allocated but not yet written. +.TP +.B FMR_OF_ATTR_FORK +This extent contains extended attribute data. +.TP +.B FMR_OF_EXTENT_MAP +This extent contains extent map information for the owner. +.TP +.B FMR_OF_SHARED +Parts of this extent may be shared. +.TP +.B FMR_OF_SPECIAL_OWNER +The +.I fmr_owner +field contains a special value instead of an inode number. +.TP +.B FMR_OF_LAST +This is the last record in the filesystem. +.RE + +.PP +The +.I fmr_reserved +field will be set to zero. + +.SH RETURN VALUE +On error, \-1 is returned, and +.I errno +is set to indicate the error. +.PP +.SH ERRORS +Error codes can be one of, but are not limited to, the following: +.TP +.B EINVAL +The array is not long enough, or a non-zero value was passed in one of the +fields that must be zero. +.TP +.B EFAULT +The pointer passed in was not mapped to a valid memory address. +.TP +.B EBADF +.IR fd +is not open for reading. +.TP +.B EPERM +This query is not allowed. +.TP +.B EOPNOTSUPP +The filesystem does not support this command. +.TP +.B EUCLEAN +The filesystem metadata is corrupt and needs repair. +.TP +.B EBADMSG +The filesystem has detected a checksum error in the metadata. +.TP +.B ENOMEM +Insufficient memory to process the request. + +.SH EXAMPLE +.TP +Please see io/fsmap.c in the xfsprogs distribution for a sample program. + +.SH CONFORMING TO +This API is Linux-specific. +Not all filesystems support it. +.fi +.in +.SH SEE ALSO +.BR ioctl (2) _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v3 3/3] ioctl_getfsmap.2: document the GETFSMAP ioctl [not found] ` <147216760214.32321.8331561706153372268.stgit@birch.djwong.org> [not found] ` <32A3DAED-21FC-4252-B53E-3503764342E8@dilger.ca> 2016-09-04 5:36 ` [PATCH v2 3/3] ioctl_getfsmap.2: document the GETFSMAP ioctl Darrick J. Wong @ 2016-09-09 6:17 ` Darrick J. Wong 2 siblings, 0 replies; 7+ messages in thread From: Darrick J. Wong @ 2016-09-09 6:17 UTC (permalink / raw) To: Dave Chinner, Theodore Ts'o, Josef Bacik, Mark Fasheh Cc: linux-fsdevel, linux-api, linux-man, adilger, linux-xfs, xfs, linux-btrfs, mtk.manpages, linux-ext4 Document the new GETFSMAP ioctl that returns the physical layout of a (disk-based) filesystem. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> --- man2/ioctl_getfsmap.2 | 313 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 313 insertions(+) create mode 100644 man2/ioctl_getfsmap.2 diff --git a/man2/ioctl_getfsmap.2 b/man2/ioctl_getfsmap.2 new file mode 100644 index 0000000..fac3ff4 --- /dev/null +++ b/man2/ioctl_getfsmap.2 @@ -0,0 +1,313 @@ +.\" Copyright (c) 2016, Oracle. All rights reserved. +.\" +.\" %%%LICENSE_START(GPLv2+_DOC_FULL) +.\" This is free documentation; you can redistribute it and/or +.\" modify it under the terms of the GNU General Public License as +.\" published by the Free Software Foundation; either version 2 of +.\" the License, or (at your option) any later version. +.\" +.\" The GNU General Public License's references to "object code" +.\" and "executables" are to be interpreted as the output of any +.\" document formatting or typesetting system, including +.\" intermediate and printed output. +.\" +.\" This manual is distributed in the hope that it will be useful, +.\" but WITHOUT ANY WARRANTY; without even the implied warranty of +.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.\" GNU General Public License for more details. +.\" +.\" You should have received a copy of the GNU General Public +.\" License along with this manual; if not, see +.\" <http://www.gnu.org/licenses/>. +.\" %%%LICENSE_END +.TH IOCTL-GETFSMAP 2 2016-09-08 "Linux" "Linux Programmer's Manual" +.SH NAME +ioctl_getfsmap \- retrieve the physical layout of the filesystem +.SH SYNOPSIS +.br +.B #include <sys/ioctl.h> +.br +.B #include <linux/fs.h> +.sp +.BI "int ioctl(int " fd ", GETFSMAP, struct fsmap_head * " arg ); +.SH DESCRIPTION +This +.BR ioctl (2) +retrieves physical extent mappings for a filesystem. +This information can be used to discover which files are mapped to a physical +block, examine free space, or find known bad blocks, among other things. + +The sole argument to this ioctl should be a pointer to a single +.BR "struct fsmap_head" ":" +.in +4n +.nf + +struct fsmap { + __u32 fmr_device; /* device id */ + __u32 fmr_flags; /* mapping flags */ + __u64 fmr_physical; /* device offset of segment */ + __u64 fmr_owner; /* owner id */ + __u64 fmr_offset; /* file offset of segment */ + __u64 fmr_length; /* length of segment */ + __u64 fmr_reserved[3]; /* must be zero */ +}; + +struct fsmap_head { + __u32 fmh_iflags; /* control flags */ + __u32 fmh_oflags; /* output flags */ + __u32 fmh_count; /* # of entries in array incl. input */ + __u32 fmh_entries; /* # of entries filled in (output). */ + __u64 fmh_reserved[6]; /* must be zero */ + + struct fsmap fmh_keys[2]; /* low and high keys for the mapping search */ + struct fsmap fmh_recs[]; /* returned records */ +}; + +.fi +.in +The two +.I fmh_keys +array elements specify the lowest and highest reverse-mapping +keys, respectively, for which userspace would like physical mapping +information. +A reverse mapping key consists of the tuple (device, block, owner, offset). +The owner and offset fields are part of the key because some filesystems +support sharing physical blocks between multiple files and +therefore may return multiple mappings for a given physical block. +.PP +Filesystem mappings are copied into the +.I fmh_recs +array, which immediately follows the header data. +.SS Fields of struct fsmap_head +.PP +The +.I fmh_iflags +field is a bitmask passed to the kernel to alter the output. +There are no flags defined, so this value must be zero. + +.PP +The +.I fmh_oflags +field is a bitmask of flags that concern all output mappings. +If +.B FMH_OF_DEV_T +is set, then the +.I fmr_device +field represents a +.B dev_t +structure containing the major and minor numbers of the block device. + +.PP +The +.I fmh_count +field contains the number of elements in the array being passed to the +kernel. +If this value is 0, +.I fmh_entries +will be set to the number of records that would have been returned had +the array been large enough; +no mapping information will be returned. + +.PP +The +.I fmh_entries +field contains the number of elements in the +.I fmh_recs +array that contain useful information. + +.PP +The +.I fmh_reserved +fields must be set to zero. + +.SS Keys +.PP +The two key records in +.B fsmap_head.fmh_keys +specify the lowest and highest extent records in the keyspace that the caller +wants returned. +A filesystem that can share blocks between files likely requires the tuple +.RI "(" "device" ", " "physical" ", " "owner" ", " "offset" ", " "flags" ")" +to uniquely index any filesystem mapping record. +Classic non-sharing filesystems might be able to identify any record with only +.RI "(" "device" ", " "physical" ", " "flags" ")." +For example, if the low key is set to (0, 36864, 0, 0, 0), the filesystem will +only return records for extents starting at or above 36KiB on disk. +If the high key is set to (0, 1048576, 0, 0, 0), only records below 1MiB will +be returned. +By convention, the field +.B fsmap_head.fmh_keys[0] +must contain the low key and +.B fsmap_head.fmh_keys[1] +must contain the high key for the request. +.PP +For convenience, if +.B fmr_length +is set in the low key, it will be added to +.IR fmr_block " or " fmr_offset +as appropriate. +The caller can take advantage of this subtlety to set up subsequent calls +by copying +.B fsmap_head.fmh_recs[fsmap_head.fmh_entries - 1] +into the low key. + +.SS Fields of struct fsmap +.PP +The +.I fmr_device +field contains a 32-bit cookie to uniquely identify the underlying storage +device. +If the +.B FMH_OF_DEV_T +flag is set in the header's +.I fmh_oflags +field, this field contains a +.B dev_t +from which major and minor numbers can be extracted. +If the flag is not set, this field contains a value that must be unique +for each unique storage device. + +.PP +The +.I fmr_physical +field contains the disk address of the extent in bytes. + +.PP +The +.I fmr_owner +field contains the owner of the extent. +This is an inode number unless +.B FMR_OF_SPECIAL_OWNER +is set in the +.I fmr_flags +field, in which case the owner value is one of the following special values: +.RS 0.4i +.TP +.B FMR_OWN_FREE +Free space. +.TP +.B FMR_OWN_UNKNOWN +This extent is in use but its owner is not known. +.TP +.B FMR_OWN_FS +Static filesystem metadata which exists at a fixed address. +On XFS these are the AG superblock, AGF, AGFL, and AGI headers. +.TP +.B FMR_OWN_LOG +The filesystem journal. +.TP +.B FMR_OWN_AG +Allocation group metadata. +On XFS these are the free space btrees or the reverse mapping btrees. +.TP +.B FMR_OWN_INOBT +Inode indexing, if any are provided. +On XFS these are the inode and free inode btrees. +.TP +.B FMR_OWN_INODES +Inode records. +.TP +.B FMR_OWN_REFC +Reference count information. +On XFS this is the reference count btree. +.TP +.B FMR_OWN_COW +This extent is being used to stage a copy-on-write. +.TP +.B FMR_OWN_DEFECTIVE: +This extent has been marked defective either by the filesystem or the +underlying device. +.RE + +.PP +The +.I fmr_offset +field contains the logical address in the mapping record in bytes. +This field has no meaning if the +.BR FMR_OF_SPECIAL_OWNER " or " FMR_OF_EXTENT_MAP +flags are set in +.IR fmr_flags "." + +.PP +The +.I fmr_length +field contains the length of the extent in bytes. + +.PP +The +.I fmr_flags +field is a bitmask of extent state flags. +The bits are: +.RS 0.4i +.TP +.B FMR_OF_PREALLOC +The extent is allocated but not yet written. +.TP +.B FMR_OF_ATTR_FORK +This extent contains extended attribute data. +.TP +.B FMR_OF_EXTENT_MAP +This extent contains extent map information for the owner. +.TP +.B FMR_OF_SHARED +Parts of this extent may be shared. +.TP +.B FMR_OF_SPECIAL_OWNER +The +.I fmr_owner +field contains a special value instead of an inode number. +.TP +.B FMR_OF_LAST +This is the last record in the filesystem. +.RE + +.PP +The +.I fmr_reserved +field will be set to zero. + +.SH RETURN VALUE +On error, \-1 is returned, and +.I errno +is set to indicate the error. +.PP +.SH ERRORS +Error codes can be one of, but are not limited to, the following: +.TP +.B EINVAL +The array is not long enough, or a non-zero value was passed in one of the +fields that must be zero. +.TP +.B EFAULT +The pointer passed in was not mapped to a valid memory address. +.TP +.B EBADF +.IR fd +is not open for reading. +.TP +.B EPERM +This query is not allowed. +.TP +.B EOPNOTSUPP +The filesystem does not support this command. +.TP +.B EUCLEAN +The filesystem metadata is corrupt and needs repair. +.TP +.B EBADMSG +The filesystem has detected a checksum error in the metadata. +.TP +.B ENOMEM +Insufficient memory to process the request. + +.SH EXAMPLE +.TP +Please see io/fsmap.c in the xfsprogs distribution for a sample program. + +.SH CONFORMING TO +This API is Linux-specific. +Not all filesystems support it. +.fi +.in +.SH SEE ALSO +.BR ioctl (2) ^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-09-11 18:56 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <147216758326.32321.8525481353986871349.stgit@birch.djwong.org>
[not found] ` <147216760214.32321.8331561706153372268.stgit@birch.djwong.org>
[not found] ` <32A3DAED-21FC-4252-B53E-3503764342E8@dilger.ca>
2016-08-30 19:09 ` [PATCH 3/3] ioctl_xfs_ioc_getfsmap.2: document XFS_IOC_GETFSMAP ioctl Darrick J. Wong
2016-09-08 23:38 ` Dave Chinner
2016-09-09 6:07 ` Darrick J. Wong
2016-09-10 0:00 ` Dave Chinner
2016-09-11 18:56 ` Darrick J. Wong
2016-09-04 5:36 ` [PATCH v2 3/3] ioctl_getfsmap.2: document the GETFSMAP ioctl Darrick J. Wong
2016-09-09 6:17 ` [PATCH v3 " Darrick J. Wong
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).