From: Eryu Guan <eguan@redhat.com>
To: fstests@vger.kernel.org
Cc: linux-xfs@vger.kernel.org, darrick.wong@oracle.com,
Eryu Guan <eguan@redhat.com>
Subject: [PATCH] generic/158,304: filter dedupe error message
Date: Fri, 30 Dec 2016 12:08:54 +0800 [thread overview]
Message-ID: <20161230040854.17512-1-eguan@redhat.com> (raw)
Kernel commit 22725ce4e4a0 ("vfs: fix isize/pos/len checks for reflink &
dedupe") added more checks on reflink and dedupe, rejected dedupe past
EOF early and explicitly, and causes generic/158 and generic/304 to fail.
Try dedupe from past EOF
-dedupe: Invalid argument
+XFS_IOC_FILE_EXTENT_SAME: Invalid argument
Try dedupe to past EOF, destination offset beyond EOF
Fix it by replacing fs-specific ioctl in error message to "dedupe".
Signed-off-by: Eryu Guan <eguan@redhat.com>
---
common/reflink | 7 +++++++
tests/generic/158 | 7 +++++--
tests/generic/158.out | 4 ++--
tests/generic/304 | 9 ++++++---
tests/generic/304.out | 2 +-
5 files changed, 21 insertions(+), 8 deletions(-)
diff --git a/common/reflink b/common/reflink
index 64ee04f..7306efd 100644
--- a/common/reflink
+++ b/common/reflink
@@ -241,6 +241,13 @@ _dedupe_range() {
$XFS_IO_PROG $xfs_io_args -f -c "dedupe $file1 $offset1 $offset2 $len" "$file2"
}
+# Filter fs-specific ioctl in error message to "dedupe"
+# e.g. replace XFS_IOC_FILE_EXTENT_SAME with dedupe
+_filter_dedupe()
+{
+ sed -e 's/XFS_IOC_FILE_EXTENT_SAME/dedupe/g'
+}
+
# Create a file of interleaved unwritten and reflinked blocks
_weave_reflink_unwritten() {
blksz=$1
diff --git a/tests/generic/158 b/tests/generic/158
index 086c522..77ab1ce 100755
--- a/tests/generic/158
+++ b/tests/generic/158
@@ -81,10 +81,12 @@ mkfifo $testdir1/fifo1
sync
_filter_enotty() {
+ _filter_dedupe | \
sed -e 's/Inappropriate ioctl for device/Invalid argument/g'
}
_filter_eperm() {
+ _filter_dedupe | \
sed -e 's/Permission denied/Invalid argument/g'
}
@@ -98,7 +100,8 @@ echo "Try overlapping dedupe"
_dedupe_range $testdir1/file1 0 $testdir1/file1 1 $((blksz * 2))
echo "Try dedupe from past EOF"
-_dedupe_range $testdir1/file1 $(( (blks + 10) * blksz)) $testdir1/file1 0 $blksz
+_dedupe_range $testdir1/file1 $(( (blks + 10) * blksz)) $testdir1/file1 0 $blksz \
+ 2>&1 | _filter_dedupe
echo "Try dedupe to past EOF, destination offset beyond EOF"
_dedupe_range $testdir1/file1 0 $testdir1/file1 $(( (blks + 10) * blksz)) \
@@ -109,7 +112,7 @@ _dedupe_range $testdir1/file1 0 $testdir1/file1 $(( (blks - 1) * blksz)) \
$((blksz * 2))
echo "Try to dedupe a dir"
-_dedupe_range $testdir1/dir1 0 $testdir1/file2 0 $blksz
+_dedupe_range $testdir1/dir1 0 $testdir1/file2 0 $blksz 2>&1 | _filter_dedupe
echo "Try to dedupe a device"
_dedupe_range $testdir1/dev1 0 $testdir1/file2 0 $blksz 2>&1 | _filter_enotty
diff --git a/tests/generic/158.out b/tests/generic/158.out
index 9b82ddf..3a9596f 100644
--- a/tests/generic/158.out
+++ b/tests/generic/158.out
@@ -14,9 +14,9 @@ dedupe: Invalid argument
Try dedupe to past EOF, destination offset behind EOF
dedupe: Invalid argument
Try to dedupe a dir
-XFS_IOC_FILE_EXTENT_SAME: Is a directory
+dedupe: Is a directory
Try to dedupe a device
-XFS_IOC_FILE_EXTENT_SAME: Invalid argument
+dedupe: Invalid argument
Try to dedupe to a dir
TEST_DIR/test-158/dir1: Is a directory
Try to dedupe to a device
diff --git a/tests/generic/304 b/tests/generic/304
index b7ee7b9..8f0a3b4 100755
--- a/tests/generic/304
+++ b/tests/generic/304
@@ -75,13 +75,16 @@ echo "Dedupe high offset to low offset"
_dedupe_range $testdir/file1 $bigoff_64k $testdir/file6 1048576 65535 >> $seqres.full
echo "Dedupe past source file EOF (should fail)"
-_dedupe_range $testdir/file2 524288 $testdir/file7 0 1048576 >> $seqres.full
+_dedupe_range $testdir/file2 524288 $testdir/file7 0 1048576 \
+ 2>&1 >> $seqres.full | _filter_dedupe
echo "Dedupe max size at nonzero offset (should fail)"
-_dedupe_range $testdir/file2 524288 $testdir/file8 0 $len >> $seqres.full
+_dedupe_range $testdir/file2 524288 $testdir/file8 0 $len \
+ 2>&1 >> $seqres.full | _filter_dedupe
echo "Dedupe with huge off/len (should fail)"
-_dedupe_range $testdir/file2 $bigoff_64k $testdir/file9 0 $bigoff_64k >> $seqres.full
+_dedupe_range $testdir/file2 $bigoff_64k $testdir/file9 0 $bigoff_64k \
+ 2>&1 >> $seqres.full | _filter_dedupe
echo "Check file creation"
_test_cycle_mount
diff --git a/tests/generic/304.out b/tests/generic/304.out
index 7b5ff0e..fbba6f3 100644
--- a/tests/generic/304.out
+++ b/tests/generic/304.out
@@ -14,7 +14,7 @@ dedupe: Invalid argument
Dedupe max size at nonzero offset (should fail)
dedupe: Invalid argument
Dedupe with huge off/len (should fail)
-XFS_IOC_FILE_EXTENT_SAME: Invalid argument
+dedupe: Invalid argument
Check file creation
file3
7ffffffffffffffe: 61 a
--
2.9.3
next reply other threads:[~2016-12-30 4:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-30 4:08 Eryu Guan [this message]
2017-01-03 20:01 ` [PATCH] generic/158,304: filter dedupe error message Darrick J. Wong
2017-01-04 3:27 ` Eryu Guan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161230040854.17512-1-eguan@redhat.com \
--to=eguan@redhat.com \
--cc=darrick.wong@oracle.com \
--cc=fstests@vger.kernel.org \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).