From: "Luis R. Rodriguez" <mcgrof@kernel.org>
To: sandeen@sandeen.net, linux-xfs@vger.kernel.org
Cc: jack@suse.com, jeffm@suse.com, okurz@suse.com,
lpechacek@suse.com, "Luis R. Rodriguez" <mcgrof@kernel.org>
Subject: [PATCH 7/9] mkfs.xfs: move ropts to struct mkfs_xfs_opts
Date: Fri, 3 Mar 2017 15:13:14 -0800 [thread overview]
Message-ID: <20170303231316.12716-8-mcgrof@kernel.org> (raw)
In-Reply-To: <20170303231316.12716-1-mcgrof@kernel.org>
This moves all main() ropts to struct mkfs_xfs_opts in
order to help with clutter and later enable re-parsing
options for other purposes.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
---
mkfs/xfs_mkfs.c | 98 +++++++++++++++++++++++++++------------------------------
1 file changed, 47 insertions(+), 51 deletions(-)
diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
index b2f4495d858d..39ab08148687 100644
--- a/mkfs/xfs_mkfs.c
+++ b/mkfs/xfs_mkfs.c
@@ -779,6 +779,10 @@ struct mkfs_xfs_opts {
int nlflag;
int nvflag; /* unused */
int nsflag;
+
+ char *rtextsize;
+ char *rtsize;
+ int norsflag;
};
#define TERABYTES(count, blog) ((__uint64_t)(count) << (40 - (blog)))
@@ -1728,6 +1732,34 @@ parse_subopts(
}
}
break;
+ case 'r':
+ while (*p != '\0') {
+ switch (getsubopt(&p, (char **)ropts.subopts, &value)) {
+ case R_EXTSIZE:
+ params->rtextsize =
+ getstr(value, &ropts, R_EXTSIZE);
+ break;
+ case R_FILE:
+ params->xi.risfile =
+ getnum(value, &ropts, R_FILE);
+ break;
+ case R_NAME:
+ case R_DEV:
+ params->xi.rtname =
+ getstr(value, &ropts, R_NAME);
+ break;
+ case R_SIZE:
+ params->rtsize = getstr(value, &ropts, R_SIZE);
+ break;
+ case R_NOALIGN:
+ params->norsflag =
+ getnum(value, &ropts, R_NOALIGN);
+ break;
+ default:
+ unknown('r', value);
+ }
+ }
+ break;
default:
usage();
}
@@ -1776,7 +1808,6 @@ main(
xfs_mount_t *mp;
xfs_mount_t mbuf;
xfs_extlen_t nbmblocks;
- int norsflag;
xfs_alloc_rec_t *nrec;
int Nflag;
int discard = 1;
@@ -1787,9 +1818,7 @@ main(
xfs_rfsblock_t rtblocks;
xfs_extlen_t rtextblocks;
xfs_rtblock_t rtextents;
- char *rtextsize;
char *rtfile;
- char *rtsize;
xfs_sb_t *sbp;
__uint64_t sector_mask;
__uint64_t tmp_agsize;
@@ -1815,10 +1844,8 @@ main(
logblocks = rtblocks = rtextblocks = 0;
Nflag = 0;
qflag = 0;
- dfile = rtfile = NULL;
- rtsize = rtextsize = protofile = NULL;
+ dfile = rtfile = protofile = NULL;
lalign = 0;
- norsflag = 0;
force_overwrite = 0;
worst_freelist = 0;
@@ -1837,6 +1864,7 @@ main(
case 'l':
case 'm':
case 'n':
+ case 'r':
p = optarg;
parse_subopts(c, p, ¶ms);
break;
@@ -1859,38 +1887,6 @@ main(
case 'q':
qflag = 1;
break;
- case 'r':
- p = optarg;
- while (*p != '\0') {
- char **subopts = (char **)ropts.subopts;
- char *value;
-
- switch (getsubopt(&p, subopts, &value)) {
- case R_EXTSIZE:
- rtextsize = getstr(value, &ropts,
- R_EXTSIZE);
- break;
- case R_FILE:
- params.xi.risfile = getnum(value, &ropts,
- R_FILE);
- break;
- case R_NAME:
- case R_DEV:
- params.xi.rtname = getstr(value, &ropts,
- R_NAME);
- break;
- case R_SIZE:
- rtsize = getstr(value, &ropts, R_SIZE);
- break;
- case R_NOALIGN:
- norsflag = getnum(value, &ropts,
- R_NOALIGN);
- break;
- default:
- unknown('r', value);
- }
- }
- break;
case 's':
p = optarg;
while (*p != '\0') {
@@ -1997,7 +1993,7 @@ _("Minimum block size for CRC enabled filesystems is %d bytes.\n"),
if (params.xi.rtname)
check_device_type(params.xi.rtname,
¶ms.xi.risfile,
- !rtsize,
+ !params.rtsize,
!params.xi.rtname,
Nflag ? NULL : ¶ms.xi.rcreat,
force_overwrite, "r");
@@ -2230,10 +2226,10 @@ _("rmapbt not supported with realtime devices\n"));
(long long)logbytes, blocksize,
(long long)(logblocks << params.blocklog));
}
- if (rtsize) {
+ if (params.rtsize) {
__uint64_t rtbytes;
- rtbytes = getnum(rtsize, &ropts, R_SIZE);
+ rtbytes = getnum(params.rtsize, &ropts, R_SIZE);
if (rtbytes % XFS_MIN_BLOCKSIZE) {
fprintf(stderr,
_("illegal rt length %lld, not a multiple of %d\n"),
@@ -2250,10 +2246,10 @@ _("rmapbt not supported with realtime devices\n"));
/*
* If specified, check rt extent size against its constraints.
*/
- if (rtextsize) {
+ if (params.rtextsize) {
__uint64_t rtextbytes;
- rtextbytes = getnum(rtextsize, &ropts, R_EXTSIZE);
+ rtextbytes = getnum(params.rtextsize, &ropts, R_EXTSIZE);
if (rtextbytes % blocksize) {
fprintf(stderr,
_("illegal rt extent size %lld, not a multiple of %d\n"),
@@ -2270,14 +2266,14 @@ _("rmapbt not supported with realtime devices\n"));
__uint64_t rswidth;
__uint64_t rtextbytes;
- if (!norsflag && !params.xi.risfile &&
- !(!rtsize && params.xi.disfile))
+ if (!params.norsflag && !params.xi.risfile &&
+ !(!params.rtsize && params.xi.disfile))
rswidth = ft.rtswidth;
else
rswidth = 0;
/* check that rswidth is a multiple of fs blocksize */
- if (!norsflag && rswidth && !(BBTOB(rswidth) % blocksize)) {
+ if (!params.norsflag && rswidth && !(BBTOB(rswidth) % blocksize)) {
rswidth = DTOBT(rswidth);
rtextbytes = rswidth << params.blocklog;
if (XFS_MIN_RTEXTSIZE <= rtextbytes &&
@@ -2427,22 +2423,22 @@ reported by the device (%u).\n"),
reported by the device (%u).\n"),
params.lsectorsize, params.xi.lbsize);
}
- if (rtsize && params.xi.rtsize > 0 && params.xi.rtbsize > sectorsize) {
+ if (params.rtsize && params.xi.rtsize > 0 && params.xi.rtbsize > sectorsize) {
fprintf(stderr, _(
"Warning: the realtime subvolume sector size %u is less than the sector size\n\
reported by the device (%u).\n"),
sectorsize, params.xi.rtbsize);
}
- if (rtsize && params.xi.rtsize > 0 && rtblocks > DTOBT(params.xi.rtsize)) {
+ if (params.rtsize && params.xi.rtsize > 0 && rtblocks > DTOBT(params.xi.rtsize)) {
fprintf(stderr,
_("size %s specified for rt subvolume is too large, "
"maximum is %lld blocks\n"),
- rtsize, (long long)DTOBT(params.xi.rtsize));
+ params.rtsize, (long long)DTOBT(params.xi.rtsize));
usage();
- } else if (!rtsize && params.xi.rtsize > 0)
+ } else if (!params.rtsize && params.xi.rtsize > 0)
rtblocks = DTOBT(params.xi.rtsize);
- else if (rtsize && !params.xi.rtdev) {
+ else if (params.rtsize && !params.xi.rtdev) {
fprintf(stderr,
_("size specified for non-existent rt subvolume\n"));
usage();
--
2.11.0
next prev parent reply other threads:[~2017-03-03 23:14 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-03 23:13 [PATCH 0/9] mkfs.xfs: add mkfs.xfs.conf support Luis R. Rodriguez
2017-03-03 23:13 ` [PATCH 1/9] mkfs.xfs: add helper to parse command line options Luis R. Rodriguez
2017-03-03 23:13 ` [PATCH 2/9] mkfs.xfs: move dopts to struct mkfs_xfs_opts Luis R. Rodriguez
2017-03-03 23:13 ` [PATCH 3/9] mkfs.xfs: move iopts to " Luis R. Rodriguez
2017-03-03 23:13 ` [PATCH 4/9] mkfs.xfs: move lopts " Luis R. Rodriguez
2017-03-03 23:13 ` [PATCH 5/9] mkfs.xfs: move mopts " Luis R. Rodriguez
2017-03-03 23:13 ` [PATCH 6/9] mkfs.xfs: move nopts " Luis R. Rodriguez
2017-03-03 23:13 ` Luis R. Rodriguez [this message]
2017-03-03 23:13 ` [PATCH 8/9] mkfs.xfs: use parse_subopts() to parse sopts Luis R. Rodriguez
2017-03-03 23:13 ` [PATCH 9/9] mkfs.xfs: add mkfs.xfs.conf parse support Luis R. Rodriguez
2017-03-03 23:55 ` Dave Chinner
2017-03-09 5:38 ` Eric Sandeen
2017-03-03 23:24 ` [PATCH 0/9] mkfs.xfs: add mkfs.xfs.conf support Luis R. Rodriguez
2017-03-04 3:49 ` Eric Sandeen
2017-03-04 4:56 ` Dave Chinner
2017-03-06 0:08 ` Eric Sandeen
2017-03-07 20:07 ` Jeff Mahoney
2017-03-07 20:09 ` Eric Sandeen
2017-03-06 8:50 ` Jan Kara
2017-03-09 0:16 ` Eric Sandeen
2017-03-09 0:51 ` Luis R. Rodriguez
2017-03-09 4:41 ` Eric Sandeen
2017-03-09 10:12 ` Jan Tulak
2017-03-09 14:31 ` Eric Sandeen
2017-03-09 15:21 ` Jan Tulak
2017-03-09 17:57 ` Luis R. Rodriguez
2017-03-09 22:34 ` Dave Chinner
2017-04-24 5:00 ` Luis R. Rodriguez
2017-04-24 7:26 ` Jan Tulak
2017-04-24 8:25 ` Luis R. Rodriguez
2017-05-11 22:46 ` Luis R. Rodriguez
2017-05-11 22:57 ` Eric Sandeen
2017-05-11 23:08 ` Luis R. Rodriguez
2017-05-12 0:48 ` Darrick J. Wong
2017-05-12 16:05 ` Eric Sandeen
2017-05-12 17:03 ` Luis R. Rodriguez
2017-05-12 17:05 ` Jeff Mahoney
2017-05-12 17:30 ` Luis R. Rodriguez
2017-05-11 23:00 ` Darrick J. Wong
2017-05-11 23:19 ` Luis R. Rodriguez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170303231316.12716-8-mcgrof@kernel.org \
--to=mcgrof@kernel.org \
--cc=jack@suse.com \
--cc=jeffm@suse.com \
--cc=linux-xfs@vger.kernel.org \
--cc=lpechacek@suse.com \
--cc=okurz@suse.com \
--cc=sandeen@sandeen.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).