From: Jan Tulak <jtulak@redhat.com>
To: linux-xfs@vger.kernel.org
Cc: Jan Tulak <jtulak@redhat.com>
Subject: [PATCH 07/12] mkfs: save user input values into opts
Date: Sun, 23 Apr 2017 20:54:58 +0200 [thread overview]
Message-ID: <20170423185503.31415-8-jtulak@redhat.com> (raw)
In-Reply-To: <20170423185503.31415-1-jtulak@redhat.com>
Save the parsed values from users into the opts table.
Signed-off-by: Jan Tulak <jtulak@redhat.com>
---
mkfs/xfs_mkfs.c | 260 +++++++++++++++++++++++++++++++++++---------------------
1 file changed, 165 insertions(+), 95 deletions(-)
diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
index 4caf93c..362c9b4 100644
--- a/mkfs/xfs_mkfs.c
+++ b/mkfs/xfs_mkfs.c
@@ -1636,16 +1636,19 @@ main(
switch (getsubopt(&p, subopts, &value)) {
case B_LOG:
- blocklog = getnum(value, &opts[OPT_B],
- B_LOG);
+ blocklog = parse_conf_val(OPT_B, B_LOG,
+ value);
blocksize = 1 << blocklog;
blflag = 1;
+ set_conf_val(OPT_B, B_SIZE, blocksize);
break;
case B_SIZE:
- blocksize = getnum(value, &opts[OPT_B],
- B_SIZE);
+ blocksize = parse_conf_val(OPT_B,
+ B_SIZE,
+ value);
blocklog = libxfs_highbit32(blocksize);
bsflag = 1;
+ set_conf_val(OPT_B, B_LOG, blocklog);
break;
default:
unknown('b', value);
@@ -1661,76 +1664,92 @@ main(
switch (getsubopt(&p, subopts, &value)) {
case D_AGCOUNT:
- agcount = getnum(value, &opts[OPT_D],
- D_AGCOUNT);
+ agcount = parse_conf_val(OPT_D,
+ D_AGCOUNT,
+ value);
daflag = 1;
break;
case D_AGSIZE:
- agsize = getnum(value, &opts[OPT_D],
- D_AGSIZE);
+ agsize = parse_conf_val(OPT_D,
+ D_AGSIZE,
+ value);
dasize = 1;
break;
case D_FILE:
- xi.disfile = getnum(value,
- &opts[OPT_D], D_FILE);
+ xi.disfile = parse_conf_val(OPT_D,
+ D_FILE,
+ value);
break;
case D_NAME:
xi.dname = getstr(value, &opts[OPT_D],
D_NAME);
+ set_conf_val(OPT_D, D_NAME, 1);
break;
case D_SIZE:
- dbytes = getnum(value, &opts[OPT_D],
- D_SIZE);
+ dbytes = parse_conf_val(OPT_D, D_SIZE,
+ value);
break;
case D_SUNIT:
- dsunit = getnum(value, &opts[OPT_D],
- D_SUNIT);
+ dsunit = parse_conf_val(OPT_D, D_SUNIT,
+ value);
break;
case D_SWIDTH:
- dswidth = getnum(value, &opts[OPT_D],
- D_SWIDTH);
+ dswidth = parse_conf_val(OPT_D,
+ D_SWIDTH,
+ value);
break;
case D_SU:
- dsu = getnum(value, &opts[OPT_D],
- D_SU);
+ dsu = parse_conf_val(OPT_D, D_SU,
+ value);
break;
case D_SW:
- dsw = getnum(value, &opts[OPT_D],
- D_SW);
+ dsw = parse_conf_val(OPT_D, D_SW,
+ value);
break;
case D_NOALIGN:
- nodsflag = getnum(value, &opts[OPT_D],
- D_NOALIGN);
+ nodsflag = parse_conf_val(OPT_D,
+ D_NOALIGN,
+ value);
break;
case D_SECTLOG:
- sectorlog = getnum(value, &opts[OPT_D],
- D_SECTLOG);
+ sectorlog = parse_conf_val(OPT_D,
+ D_SECTLOG,
+ value);
sectorsize = 1 << sectorlog;
slflag = 1;
+ set_conf_val(OPT_D, D_SECTSIZE,
+ sectorsize);
break;
case D_SECTSIZE:
- sectorsize = getnum(value,
- &opts[OPT_D], D_SECTSIZE);
+ sectorsize = parse_conf_val(OPT_D,
+ D_SECTSIZE,
+ value);
sectorlog =
libxfs_highbit32(sectorsize);
ssflag = 1;
+ set_conf_val(OPT_D, D_SECTLOG,
+ sectorlog);
break;
case D_RTINHERIT:
- c = getnum(value, &opts[OPT_D],
- D_RTINHERIT);
+ c = parse_conf_val(OPT_D, D_RTINHERIT,
+ value);
if (c)
fsx.fsx_xflags |=
XFS_DIFLAG_RTINHERIT;
break;
case D_PROJINHERIT:
- fsx.fsx_projid = getnum(value,
- &opts[OPT_D], D_PROJINHERIT);
+ fsx.fsx_projid =
+ parse_conf_val(OPT_D,
+ D_PROJINHERIT,
+ value);
fsx.fsx_xflags |=
XFS_DIFLAG_PROJINHERIT;
break;
case D_EXTSZINHERIT:
- fsx.fsx_extsize = getnum(value,
- &opts[OPT_D], D_EXTSZINHERIT);
+ fsx.fsx_extsize =
+ parse_conf_val(OPT_D,
+ D_EXTSZINHERIT,
+ value);
fsx.fsx_xflags |=
XFS_DIFLAG_EXTSZINHERIT;
break;
@@ -1748,45 +1767,53 @@ main(
switch (getsubopt(&p, subopts, &value)) {
case I_ALIGN:
- sb_feat.inode_align = getnum(value,
- &opts[OPT_I], I_ALIGN);
+ sb_feat.inode_align =
+ parse_conf_val(OPT_I, I_ALIGN,
+ value);
break;
case I_LOG:
- inodelog = getnum(value, &opts[OPT_I],
- I_LOG);
+ inodelog = parse_conf_val(OPT_I, I_LOG,
+ value);
isize = 1 << inodelog;
ilflag = 1;
+ set_conf_val(OPT_I, I_SIZE, isize);
break;
case I_MAXPCT:
- imaxpct = getnum(value, &opts[OPT_I],
- I_MAXPCT);
+ imaxpct = parse_conf_val(OPT_I,
+ I_MAXPCT,
+ value);
imflag = 1;
break;
case I_PERBLOCK:
- inopblock = getnum(value, &opts[OPT_I],
- I_PERBLOCK);
+ inopblock = parse_conf_val(OPT_I,
+ I_PERBLOCK,
+ value);
ipflag = 1;
break;
case I_SIZE:
- isize = getnum(value, &opts[OPT_I],
- I_SIZE);
+ isize = parse_conf_val(OPT_I, I_SIZE,
+ value);
inodelog = libxfs_highbit32(isize);
isflag = 1;
+ set_conf_val(OPT_I, I_LOG, inodelog);
break;
case I_ATTR:
sb_feat.attr_version =
- getnum(value, &opts[OPT_I],
- I_ATTR);
+ parse_conf_val(OPT_I, I_ATTR,
+ value);
break;
case I_PROJID32BIT:
sb_feat.projid16bit =
!getnum(value, &opts[OPT_I],
I_PROJID32BIT);
+ set_conf_val(OPT_I, I_PROJID32BIT,
+ sb_feat.projid16bit);
break;
case I_SPINODES:
- sb_feat.spinodes = getnum(value,
- &opts[OPT_I],
- I_SPINODES);
+ sb_feat.spinodes =
+ parse_conf_val(OPT_I,
+ I_SPINODES,
+ value);
break;
default:
unknown('i', value);
@@ -1802,27 +1829,31 @@ main(
switch (getsubopt(&p, subopts, &value)) {
case L_AGNUM:
- logagno = getnum(value, &opts[OPT_L],
- L_AGNUM);
+ logagno = parse_conf_val(OPT_L,
+ L_AGNUM,
+ value);
laflag = 1;
break;
case L_FILE:
- xi.lisfile = getnum(value,
- &opts[OPT_L], L_FILE);
+ xi.lisfile = parse_conf_val(OPT_L,
+ L_FILE,
+ value);
break;
case L_INTERNAL:
- loginternal = getnum(value,
- &opts[OPT_L], L_INTERNAL);
+ loginternal =
+ parse_conf_val(OPT_L,
+ L_INTERNAL,
+ value);
liflag = 1;
break;
case L_SU:
- lsu = getnum(value, &opts[OPT_L],
- L_SU);
+ lsu = parse_conf_val(OPT_L, L_SU,
+ value);
lsuflag = 1;
break;
case L_SUNIT:
- lsunit = getnum(value, &opts[OPT_L],
- L_SUNIT);
+ lsunit = parse_conf_val(OPT_L, L_SUNIT,
+ value);
lsunitflag = 1;
break;
case L_NAME:
@@ -1832,34 +1863,48 @@ main(
xi.logname = logfile;
ldflag = 1;
loginternal = 0;
+ set_conf_val(OPT_L, L_NAME, 1);
+ set_conf_val(OPT_L, L_DEV, 1);
break;
case L_VERSION:
sb_feat.log_version =
- getnum(value, &opts[OPT_L],
- L_VERSION);
+ parse_conf_val(OPT_L,
+ L_VERSION,
+ value);
lvflag = 1;
+ set_conf_val(OPT_L, L_VERSION,
+ sb_feat.log_version);
break;
case L_SIZE:
- logbytes = getnum(value,
- &opts[OPT_L], L_SIZE);
+ logbytes = parse_conf_val(OPT_L,
+ L_SIZE,
+ value);
break;
case L_SECTLOG:
- lsectorlog = getnum(value,
- &opts[OPT_L], L_SECTLOG);
+ lsectorlog = parse_conf_val(OPT_L,
+ L_SECTLOG,
+ value);
lsectorsize = 1 << lsectorlog;
lslflag = 1;
+ set_conf_val(OPT_L, L_SECTSIZE,
+ lsectorsize);
break;
case L_SECTSIZE:
- lsectorsize = getnum(value,
- &opts[OPT_L], L_SECTSIZE);
+ lsectorsize =
+ parse_conf_val(OPT_L,
+ L_SECTSIZE,
+ value);
lsectorlog =
libxfs_highbit32(lsectorsize);
lssflag = 1;
+ set_conf_val(OPT_L, L_SECTLOG,
+ lsectorlog);
break;
case L_LAZYSBCNTR:
sb_feat.lazy_sb_counters =
- getnum(value, &opts[OPT_L],
- L_LAZYSBCNTR);
+ parse_conf_val(OPT_L,
+ L_LAZYSBCNTR,
+ value);
break;
default:
unknown('l', value);
@@ -1881,29 +1926,35 @@ main(
switch (getsubopt(&p, subopts, &value)) {
case M_CRC:
sb_feat.crcs_enabled =
- getnum(value, &opts[OPT_M],
- M_CRC);
+ parse_conf_val(OPT_M, M_CRC,
+ value);
if (sb_feat.crcs_enabled)
sb_feat.dirftype = true;
break;
case M_FINOBT:
- sb_feat.finobt = getnum(
- value, &opts[OPT_M], M_FINOBT);
+ sb_feat.finobt =
+ parse_conf_val(OPT_M, M_FINOBT,
+ value);
+ set_conf_val(OPT_M, M_FINOBT,
+ sb_feat.finobt);
break;
case M_UUID:
if (!value || *value == '\0')
reqval('m', subopts, M_UUID);
if (platform_uuid_parse(value, &uuid))
illegal(optarg, "m uuid");
+ set_conf_val(OPT_M, M_UUID, 1);
break;
case M_RMAPBT:
- sb_feat.rmapbt = getnum(
- value, &opts[OPT_M], M_RMAPBT);
+ sb_feat.rmapbt =
+ parse_conf_val(OPT_M, M_RMAPBT,
+ value);
break;
case M_REFLINK:
sb_feat.reflink =
- getnum(value, &opts[OPT_M],
- M_REFLINK);
+ parse_conf_val(OPT_M,
+ M_REFLINK,
+ value);
break;
default:
unknown('m', value);
@@ -1919,17 +1970,23 @@ main(
switch (getsubopt(&p, subopts, &value)) {
case N_LOG:
- dirblocklog = getnum(value,
- &opts[OPT_N], N_LOG);
+ dirblocklog = parse_conf_val(OPT_N,
+ N_LOG,
+ value);
dirblocksize = 1 << dirblocklog;
nlflag = 1;
+ set_conf_val(OPT_N, N_SIZE,
+ dirblocksize);
break;
case N_SIZE:
- dirblocksize = getnum(value,
- &opts[OPT_N], N_SIZE);
+ dirblocksize = parse_conf_val(OPT_N,
+ N_SIZE,
+ value);
dirblocklog =
libxfs_highbit32(dirblocksize);
nsflag = 1;
+ set_conf_val(OPT_N, N_LOG,
+ dirblocklog);
break;
case N_VERSION:
value = getstr(value, &opts[OPT_N],
@@ -1940,14 +1997,17 @@ main(
} else {
sb_feat.dir_version =
getnum(value,
- &opts[OPT_N],
- N_VERSION);
+ &opts[OPT_N],
+ N_VERSION);
}
nvflag = 1;
+ set_conf_val(OPT_N, N_VERSION,
+ sb_feat.dir_version);
break;
case N_FTYPE:
- sb_feat.dirftype = getnum(value,
- &opts[OPT_N], N_FTYPE);
+ sb_feat.dirftype =
+ parse_conf_val(OPT_N, N_FTYPE,
+ value);
break;
default:
unknown('n', value);
@@ -1977,25 +2037,30 @@ main(
switch (getsubopt(&p, subopts, &value)) {
case R_EXTSIZE:
- rtextbytes = getnum(value,
- &opts[OPT_R], R_EXTSIZE);
+ rtextbytes = parse_conf_val(OPT_R,
+ R_EXTSIZE,
+ value);
break;
case R_FILE:
- xi.risfile = getnum(value,
- &opts[OPT_R], R_FILE);
+ xi.risfile = parse_conf_val(OPT_R,
+ R_FILE,
+ value);
break;
case R_NAME:
case R_DEV:
xi.rtname = getstr(value, &opts[OPT_R],
R_NAME);
+ set_conf_val(OPT_R, R_NAME, 1);
+ set_conf_val(OPT_R, R_DEV, 1);
break;
case R_SIZE:
- rtbytes = getnum(value, &opts[OPT_R],
- R_SIZE);
+ rtbytes = parse_conf_val(OPT_R, R_SIZE,
+ value);
break;
case R_NOALIGN:
- norsflag = getnum(value, &opts[OPT_R],
- R_NOALIGN);
+ norsflag = parse_conf_val(OPT_R,
+ R_NOALIGN,
+ value);
break;
default:
unknown('r', value);
@@ -2016,12 +2081,14 @@ main(
conflict('s', subopts,
S_SECTSIZE,
S_SECTLOG);
- sectorlog = getnum(value, &opts[OPT_S],
- S_SECTLOG);
+ sectorlog = parse_conf_val(OPT_S,
+ S_SECTLOG,
+ value);
lsectorlog = sectorlog;
sectorsize = 1 << sectorlog;
lsectorsize = sectorsize;
lslflag = slflag = 1;
+ set_conf_val(OPT_S, S_LOG, sectorsize);
break;
case S_SIZE:
case S_SECTSIZE:
@@ -2029,13 +2096,16 @@ main(
conflict('s', subopts,
S_SECTLOG,
S_SECTSIZE);
- sectorsize = getnum(value,
- &opts[OPT_S], S_SECTSIZE);
+ sectorsize = parse_conf_val(OPT_S,
+ S_SECTSIZE,
+ value);
lsectorsize = sectorsize;
sectorlog =
libxfs_highbit32(sectorsize);
lsectorlog = sectorlog;
lssflag = ssflag = 1;
+ set_conf_val(OPT_S,
+ S_SIZE, sectorlog);
break;
default:
unknown('s', value);
--
2.1.4
next prev parent reply other threads:[~2017-04-23 18:55 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-23 18:54 [PATCH 00/12] mkfs: save user input into opts table Jan Tulak
2017-04-23 18:54 ` [PATCH 01/12] mkfs: Save raw user input field to the opts struct Jan Tulak
2017-04-25 17:38 ` Eric Sandeen
2017-04-23 18:54 ` [PATCH 02/12] mkfs: rename defaultval to flagval in opts Jan Tulak
2017-04-25 16:52 ` Eric Sandeen
2017-04-26 7:30 ` Jan Tulak
2017-04-26 13:02 ` Eric Sandeen
2017-04-26 13:20 ` Jan Tulak
2017-04-23 18:54 ` [PATCH 03/12] mkfs: remove intermediate getstr followed by getnum Jan Tulak
2017-04-25 17:37 ` Eric Sandeen
2017-04-26 7:40 ` Jan Tulak
2017-04-26 13:13 ` Eric Sandeen
2017-04-23 18:54 ` [PATCH 04/12] mkfs: merge tables for opts parsing into one table Jan Tulak
2017-04-25 3:04 ` Luis R. Rodriguez
2017-04-25 7:45 ` Jan Tulak
2017-04-25 13:28 ` Eric Sandeen
2017-04-26 1:38 ` Luis R. Rodriguez
2017-04-26 1:45 ` Luis R. Rodriguez
2017-04-26 2:00 ` Eric Sandeen
2017-04-26 8:01 ` Luis R. Rodriguez
2017-04-26 8:24 ` Jan Tulak
2017-04-26 8:21 ` Luis R. Rodriguez
2017-04-26 8:38 ` Jan Tulak
2017-04-25 21:45 ` Eric Sandeen
2017-04-26 4:09 ` Eric Sandeen
2017-04-26 8:14 ` Jan Tulak
2017-04-23 18:54 ` [PATCH 05/12] mkfs: extend opt_params with a value field Jan Tulak
2017-04-25 3:13 ` Luis R. Rodriguez
2017-04-25 8:04 ` Jan Tulak
2017-04-25 9:39 ` Jan Tulak
2017-04-26 1:04 ` Luis R. Rodriguez
2017-04-26 8:51 ` Jan Tulak
2017-04-26 1:10 ` Luis R. Rodriguez
2017-04-26 2:50 ` Eric Sandeen
2017-04-26 8:52 ` Jan Tulak
2017-04-23 18:54 ` [PATCH 06/12] mkfs: create get/set functions for opts table Jan Tulak
2017-04-25 3:40 ` Luis R. Rodriguez
2017-04-25 8:11 ` Jan Tulak
2017-04-26 1:43 ` Luis R. Rodriguez
2017-04-23 18:54 ` Jan Tulak [this message]
2017-04-25 5:19 ` [PATCH 07/12] mkfs: save user input values into opts Luis R. Rodriguez
2017-04-25 8:16 ` Jan Tulak
2017-04-26 1:47 ` Luis R. Rodriguez
2017-04-23 18:54 ` [PATCH 08/12] mkfs: replace variables with opts table: -b,d,s options Jan Tulak
2017-04-25 5:27 ` Luis R. Rodriguez
2017-04-25 5:30 ` Luis R. Rodriguez
2017-04-25 8:37 ` Jan Tulak
2017-04-26 0:45 ` Luis R. Rodriguez
2017-04-26 9:09 ` Jan Tulak
2017-04-23 18:55 ` [PATCH 09/12] mkfs: replace variables with opts table: -i options Jan Tulak
2017-04-23 18:55 ` [PATCH 10/12] mkfs: replace variables with opts table: -l options Jan Tulak
2017-04-23 18:55 ` [PATCH 11/12] mkfs: replace variables with opts table: -n options Jan Tulak
2017-04-23 18:55 ` [PATCH 12/12] mkfs: replace variables with opts table: -r options Jan Tulak
2017-04-25 2:52 ` [PATCH 00/12] mkfs: save user input into opts table Luis R. Rodriguez
2017-04-25 16:20 ` Eric Sandeen
2017-04-26 2:02 ` Luis R. Rodriguez
2017-04-26 2:17 ` Eric Sandeen
2017-06-28 16:18 ` Luis R. Rodriguez
2017-06-29 7:56 ` Jan Tulak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170423185503.31415-8-jtulak@redhat.com \
--to=jtulak@redhat.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox