linux-xfs.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Darrick J. Wong" <darrick.wong@oracle.com>
To: eguan@redhat.com
Cc: linux-xfs@vger.kernel.org, fstests@vger.kernel.org,
	Brian Foster <bfoster@redhat.com>
Subject: [PATCH v3 3/5] common/inject: refactor helpers to use new errortag interface
Date: Fri, 4 Aug 2017 08:37:07 -0700	[thread overview]
Message-ID: <20170804153707.GA24087@magnolia> (raw)
In-Reply-To: <150067468569.30639.11717903404151243816.stgit@magnolia>

Refactor the XFS error injection helpers to use the new errortag
interface to configure error injection.  If that isn't present, fall
back either to the xfs_io/ioctl based injection or the older sysfs
knobs.  Refactor existing testcases to use the new helpers.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
v3: fix _notrun to _fail when we can't set a knob to a particular value
v2: fix name of the 'find knob' function to communicate that it takes a
mountpoint's device, not the mountpoint itself; check for debug before
we check for knobs
---
 common/inject |   59 +++++++++++++++++++++++++++++++++++++++++++++++++++++++--
 tests/xfs/141 |    5 +++--
 tests/xfs/196 |   17 ++++++----------
 3 files changed, 66 insertions(+), 15 deletions(-)

diff --git a/common/inject b/common/inject
index 8ecc290..f30d0ba 100644
--- a/common/inject
+++ b/common/inject
@@ -35,12 +35,49 @@ _require_error_injection()
 	esac
 }
 
+# Find the errortag injection knob in sysfs for a given xfs mount's
+# block device.
+_find_xfs_mountdev_errortag_knob()
+{
+	dev="$1"
+	knob="$2"
+	shortdev="$(_short_dev "${dev}")"
+	tagfile="/sys/fs/xfs/${shortdev}/errortag/${knob}"
+
+	# Some of the new sysfs errortag knobs were previously available via
+	# another sysfs path.
+	case "${knob}" in
+	"log_bad_crc")
+		if [ ! -w "${tagfile}" ]; then
+			tagfile="/sys/fs/xfs/${shortdev}/log/log_badcrc_factor"
+		fi
+		;;
+	"drop_writes")
+		if [ ! -w "${tagfile}" ]; then
+			tagfile="/sys/fs/xfs/${shortdev}/drop_writes"
+		fi
+		if [ ! -w "${tagfile}" ]; then
+			tagfile="/sys/fs/xfs/${shortdev}/fail_writes"
+		fi
+		;;
+	*)
+		;;
+	esac
+
+	echo "${tagfile}"
+}
+
 # Requires that xfs_io inject command knows about this error type
 _require_xfs_io_error_injection()
 {
 	type="$1"
 	_require_error_injection
 
+	# Can we find the error injection knobs via the new errortag
+	# configuration mechanism?
+	knob="$(_find_xfs_mountdev_errortag_knob "${TEST_DEV}" "${type}")"
+	test -w "${knob}" && return
+
 	# NOTE: We can't actually test error injection here because xfs
 	# hasn't always range checked the argument to xfs_errortag_add.
 	# We also don't want to trip an error before we're ready to deal
@@ -54,16 +91,34 @@ _require_xfs_io_error_injection()
 _test_inject_error()
 {
 	type="$1"
+	value="$2"
 
-	$XFS_IO_PROG -x -c "inject $type" $TEST_DIR
+	knob="$(_find_xfs_mountdev_errortag_knob "${TEST_DEV}" "${type}")"
+	if [ -w "${knob}" ]; then
+		test -z "${value}" && value="default"
+		echo -n "${value}" > "${knob}"
+	elif [ -z "${value}" ] || [ "${value}" = "default" ]; then
+		$XFS_IO_PROG -x -c "inject $type" $TEST_DIR
+	else
+		_fail "Cannot inject error ${type} value ${value}."
+	fi
 }
 
 # Inject an error into the scratch fs
 _scratch_inject_error()
 {
 	type="$1"
+	value="$2"
 
-	$XFS_IO_PROG -x -c "inject $type" $SCRATCH_MNT
+	knob="$(_find_xfs_mountdev_errortag_knob "${SCRATCH_DEV}" "${type}")"
+	if [ -w "${knob}" ]; then
+		test -z "${value}" && value="default"
+		echo -n "${value}" > "${knob}"
+	elif [ -z "${value}" ] || [ "${value}" = "default" ]; then
+		$XFS_IO_PROG -x -c "inject $type" $SCRATCH_MNT
+	else
+		_fail "Cannot inject error ${type} value ${value}."
+	fi
 }
 
 # Unmount and remount the scratch device, dumping the log
diff --git a/tests/xfs/141 b/tests/xfs/141
index 56ff14e..f61e524 100755
--- a/tests/xfs/141
+++ b/tests/xfs/141
@@ -47,13 +47,14 @@ rm -f $seqres.full
 
 # get standard environment, filters and checks
 . ./common/rc
+. ./common/inject
 
 # real QA test starts here
 
 # Modify as appropriate.
 _supported_fs xfs
 _supported_os Linux
-_require_xfs_sysfs $(_short_dev $TEST_DEV)/log/log_badcrc_factor
+_require_xfs_io_error_injection "log_bad_crc"
 _require_scratch
 _require_command "$KILLALL_PROG" killall
 
@@ -69,7 +70,7 @@ for i in $(seq 1 5); do
 	# (increase this value to run fsstress longer).
 	factor=$((RANDOM % 100 + 1))
 	echo iteration $i log_badcrc_factor: $factor >> $seqres.full 2>&1
-	echo $factor > /sys/fs/xfs/$sdev/log/log_badcrc_factor
+	_scratch_inject_error "log_bad_crc" "$factor"
 
 	# Run fsstress until the filesystem shuts down. It will shut down
 	# automatically when error injection triggers.
diff --git a/tests/xfs/196 b/tests/xfs/196
index e9b0649..fe3f570 100755
--- a/tests/xfs/196
+++ b/tests/xfs/196
@@ -45,6 +45,7 @@ _cleanup()
 # get standard environment, filters and checks
 . ./common/rc
 . ./common/punch
+. ./common/inject
 
 # real QA test starts here
 rm -f $seqres.full
@@ -53,13 +54,7 @@ rm -f $seqres.full
 _supported_fs generic
 _supported_os Linux
 _require_scratch
-
-DROP_WRITES="drop_writes"
-# replace "drop_writes" with "fail_writes" for old kernel
-if [ -f /sys/fs/xfs/$(_short_dev $TEST_DEV)/fail_writes ];then
-	DROP_WRITES="fail_writes"
-fi
-_require_xfs_sysfs $(_short_dev $TEST_DEV)/${DROP_WRITES}
+_require_xfs_io_error_injection "drop_writes"
 
 _scratch_mkfs >/dev/null 2>&1
 _scratch_mount
@@ -72,7 +67,7 @@ bytes=$((64 * 1024))
 $XFS_IO_PROG -f -c "pwrite 0 $bytes" $file >> $seqres.full 2>&1
 
 # Enable write drops. All buffered writes are dropped from this point on.
-echo 1 > /sys/fs/xfs/$sdev/$DROP_WRITES
+_scratch_inject_error "drop_writes" 1
 
 # Write every other 4k range to split the larger delalloc extent into many more
 # smaller extents. Use pwrite because with write failures enabled, all
@@ -89,7 +84,7 @@ for i in $(seq 4096 8192 $endoff); do
 	$XFS_IO_PROG -c "pwrite $i 4k" $file >> $seqres.full 2>&1
 done
 
-echo 0 > /sys/fs/xfs/$sdev/$DROP_WRITES
+_scratch_inject_error "drop_writes" 0
 
 _scratch_cycle_mount
 $XFS_IO_PROG -c 'bmap -vp' $file | _filter_bmap
@@ -104,9 +99,9 @@ for offset in $(seq 0 100 500); do
 	$XFS_IO_PROG -fc "pwrite ${offset}m 100m" $file >> $seqres.full 2>&1
 
 	punchoffset=$((offset + 75))
-	echo 1 > /sys/fs/xfs/$sdev/$DROP_WRITES
+	_scratch_inject_error "drop_writes"
 	$XFS_IO_PROG -c "pwrite ${punchoffset}m 4k" $file >> $seqres.full 2>&1
-	echo 0 > /sys/fs/xfs/$sdev/$DROP_WRITES
+	_scratch_inject_error "drop_writes" 0
 done
 
 echo "Silence is golden."

  parent reply	other threads:[~2017-08-04 15:37 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-21 22:04 [PATCH 0/5] miscellaneous tests Darrick J. Wong
2017-07-21 22:04 ` [PATCH 1/5] xfs: only run scrub in dry run mode Darrick J. Wong
2017-07-21 22:04 ` [PATCH 2/5] ext4: fsmap tests Darrick J. Wong
2017-07-21 22:04 ` [PATCH 3/5] common/inject: refactor helpers to use new errortag interface Darrick J. Wong
2017-08-02  8:37   ` Eryu Guan
2017-08-02 14:30     ` Brian Foster
2017-08-02 15:52       ` Darrick J. Wong
2017-08-02 16:29         ` Brian Foster
2017-08-03  0:56         ` Eryu Guan
2017-08-03 15:49   ` [PATCH v2 " Darrick J. Wong
2017-08-04  0:45     ` Eryu Guan
2017-08-04 15:32       ` Darrick J. Wong
2017-08-04 15:37   ` Darrick J. Wong [this message]
2017-07-21 22:04 ` [PATCH 4/5] common/populate: enable xfs quota accounting Darrick J. Wong
2017-08-04  1:54   ` Eryu Guan
2017-08-08 21:24     ` Darrick J. Wong
2017-08-04  2:22   ` Eryu Guan
2017-08-08 21:22     ` Darrick J. Wong
2017-08-23 22:03       ` Darrick J. Wong
2017-08-24  3:23         ` Eryu Guan
2017-07-21 22:04 ` [PATCH 5/5] xfs: test fuzzing every field of a dquot Darrick J. Wong
2017-08-24  9:03   ` Eryu Guan
2017-08-24 17:37     ` Darrick J. Wong
2017-08-04  7:00 ` [PATCH 0/5] miscellaneous tests Eryu Guan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170804153707.GA24087@magnolia \
    --to=darrick.wong@oracle.com \
    --cc=bfoster@redhat.com \
    --cc=eguan@redhat.com \
    --cc=fstests@vger.kernel.org \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).