From: Dave Chinner <david@fromorbit.com>
To: linux-xfs@vger.kernel.org
Subject: [PATCH 24/42] mkfs: factor superblock feature validation
Date: Wed, 30 Aug 2017 09:50:34 +1000 [thread overview]
Message-ID: <20170829235052.21050-25-david@fromorbit.com> (raw)
In-Reply-To: <20170829235052.21050-1-david@fromorbit.com>
From: Dave Chinner <dchinner@redhat.com>
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
---
mkfs/xfs_mkfs.c | 228 +++++++++++++++++++++++++++++++-------------------------
1 file changed, 127 insertions(+), 101 deletions(-)
diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
index 64542442148c..1c697dd5d4e1 100644
--- a/mkfs/xfs_mkfs.c
+++ b/mkfs/xfs_mkfs.c
@@ -2090,6 +2090,130 @@ _("log stripe unit specified, using v2 logs\n"));
}
+/*
+ * Check that the incoming features make sense. The CLI structure was
+ * initialised with the default values before parsing, so we can just
+ * check it and copy it straight across to the cfg structure if it
+ * checks out.
+ */
+static void
+validate_sb_features(
+ struct mkfs_params *cfg,
+ struct cli_params *cli)
+{
+ /*
+ * Now we have blocks and sector sizes set up, check parameters that are
+ * no longer optional for CRC enabled filesystems. Catch them up front
+ * here before doing anything else.
+ */
+ if (cli->sb_feat.crcs_enabled) {
+ /* minimum inode size is 512 bytes, rest checked later */
+ if (cli->inodesize &&
+ cli->inodesize < (1 << XFS_DINODE_DFL_CRC_LOG)) {
+ fprintf(stderr,
+_("Minimum inode size for CRCs is %d bytes\n"),
+ 1 << XFS_DINODE_DFL_CRC_LOG);
+ usage();
+ }
+
+ /* inodes always aligned */
+ if (!cli->sb_feat.inode_align) {
+ fprintf(stderr,
+_("Inodes always aligned for CRC enabled filesytems\n"));
+ usage();
+ }
+
+ /* lazy sb counters always on */
+ if (!cli->sb_feat.lazy_sb_counters) {
+ fprintf(stderr,
+_("Lazy superblock counted always enabled for CRC enabled filesytems\n"));
+ usage();
+ }
+
+ /* version 2 logs always on */
+ if (cli->sb_feat.log_version != 2) {
+ fprintf(stderr,
+_("V2 logs always enabled for CRC enabled filesytems\n"));
+ usage();
+ }
+
+ /* attr2 always on */
+ if (cli->sb_feat.attr_version != 2) {
+ fprintf(stderr,
+_("V2 attribute format always enabled on CRC enabled filesytems\n"));
+ usage();
+ }
+
+ /* 32 bit project quota always on */
+ /* attr2 always on */
+ if (cli->sb_feat.projid16bit) {
+ fprintf(stderr,
+_("32 bit Project IDs always enabled on CRC enabled filesytems\n"));
+ usage();
+ }
+
+ /* ftype always on */
+ if (!cli->sb_feat.dirftype) {
+ fprintf(stderr,
+_("Directory ftype field always enabled on CRC enabled filesytems\n"));
+ usage();
+ }
+
+ } else {
+ /*
+ * The kernel doesn't currently support crc=0,finobt=1
+ * filesystems. If crcs are not enabled and the user has not
+ * explicitly turned finobt on, then silently turn it off to
+ * avoid an unnecessary warning.
+ * If the user explicitly tried to use crc=0,finobt=1,
+ * then issue an error.
+ * The same is also for sparse inodes.
+ */
+ if (cli->sb_feat.finobt && cli_opt_set(&mopts, M_FINOBT)) {
+ fprintf(stderr,
+_("finobt not supported without CRC support\n"));
+ usage();
+ }
+ cli->sb_feat.finobt = false;
+
+ if (cli->sb_feat.spinodes) {
+ fprintf(stderr,
+_("sparse inodes not supported without CRC support\n"));
+ usage();
+ }
+ cli->sb_feat.spinodes = false;
+
+ if (cli->sb_feat.rmapbt) {
+ fprintf(stderr,
+_("rmapbt not supported without CRC support\n"));
+ usage();
+ }
+ cli->sb_feat.rmapbt = false;
+
+ if (cli->sb_feat.reflink) {
+ fprintf(stderr,
+_("reflink not supported without CRC support\n"));
+ usage();
+ }
+ cli->sb_feat.reflink = false;
+ }
+
+
+ if (cli->sb_feat.rmapbt && cli->xi->rtname) {
+ fprintf(stderr,
+_("rmapbt not supported with realtime devices\n"));
+ usage();
+ cli->sb_feat.rmapbt = false;
+ }
+
+ /*
+ * Copy features across to config structure now.
+ */
+ cfg->sb_feat = cli->sb_feat;
+ if (!platform_uuid_is_null(&cli->uuid))
+ platform_uuid_copy(&cfg->uuid, &cli->uuid);
+}
+
static void
print_mkfs_cfg(
struct mkfs_params *cfg,
@@ -2820,7 +2944,7 @@ main(
};
struct mkfs_params cfg = {};
- platform_uuid_generate(&uuid);
+ platform_uuid_generate(&cli.uuid);
progname = basename(argv[0]);
setlocale(LC_ALL, "");
bindtextdomain(PACKAGE, LOCALEDIR);
@@ -3012,11 +3136,6 @@ main(
sb_feat = cli.sb_feat;
/* end temp don't break code */
- if (sb_feat.crcs_enabled && !sb_feat.dirftype) {
- fprintf(stderr, _("cannot disable ftype with crcs enabled\n"));
- usage();
- }
-
/*
* Extract as much of the valid config as we can from the CLI input
* before opening the libxfs devices.
@@ -3025,6 +3144,7 @@ main(
validate_sectorsize(&cfg, &cli, &dft, &ft, dfile, dry_run,
force_overwrite);
validate_log_sectorsize(&cfg, &cli, &dft);
+ validate_sb_features(&cfg, &cli);
/* temp don't break code */
sectorsize = cfg.sectorsize;
@@ -3034,103 +3154,9 @@ main(
lsectorsize = cfg.lsectorsize;
lsectorlog = cfg.lsectorlog;
sb_feat = cfg.sb_feat;
+ platform_uuid_copy(&uuid, &cfg.uuid);
/* end temp don't break code */
- /*
- * Now we have blocks and sector sizes set up, check parameters that are
- * no longer optional for CRC enabled filesystems. Catch them up front
- * here before doing anything else.
- */
- if (sb_feat.crcs_enabled) {
- /* minimum inode size is 512 bytes, ipflag checked later */
- if ((isflag || ilflag) && inodelog < XFS_DINODE_DFL_CRC_LOG) {
- fprintf(stderr,
-_("Minimum inode size for CRCs is %d bytes\n"),
- 1 << XFS_DINODE_DFL_CRC_LOG);
- usage();
- }
-
- /* inodes always aligned */
- if (!sb_feat.inode_align) {
- fprintf(stderr,
-_("Inodes always aligned for CRC enabled filesytems\n"));
- usage();
- }
-
- /* lazy sb counters always on */
- if (!sb_feat.lazy_sb_counters) {
- fprintf(stderr,
-_("Lazy superblock counted always enabled for CRC enabled filesytems\n"));
- usage();
- }
-
- /* version 2 logs always on */
- if (sb_feat.log_version != 2) {
- fprintf(stderr,
-_("V2 logs always enabled for CRC enabled filesytems\n"));
- usage();
- }
-
- /* attr2 always on */
- if (sb_feat.attr_version != 2) {
- fprintf(stderr,
-_("V2 attribute format always enabled on CRC enabled filesytems\n"));
- usage();
- }
-
- /* 32 bit project quota always on */
- /* attr2 always on */
- if (sb_feat.projid16bit) {
- fprintf(stderr,
-_("32 bit Project IDs always enabled on CRC enabled filesytems\n"));
- usage();
- }
- } else {
- /*
- * The kernel doesn't currently support crc=0,finobt=1
- * filesystems. If crcs are not enabled and the user has not
- * explicitly turned finobt on, then silently turn it off to
- * avoid an unnecessary warning.
- * If the user explicitly tried to use crc=0,finobt=1,
- * then issue an error.
- * The same is also for sparse inodes.
- */
- if (sb_feat.finobt && mopts.subopt_params[M_FINOBT].seen) {
- fprintf(stderr,
-_("finobt not supported without CRC support\n"));
- usage();
- }
- sb_feat.finobt = 0;
-
- if (sb_feat.spinodes) {
- fprintf(stderr,
-_("sparse inodes not supported without CRC support\n"));
- usage();
- }
- sb_feat.spinodes = 0;
-
- if (sb_feat.rmapbt) {
- fprintf(stderr,
-_("rmapbt not supported without CRC support\n"));
- usage();
- }
- sb_feat.rmapbt = false;
-
- if (sb_feat.reflink) {
- fprintf(stderr,
-_("reflink not supported without CRC support\n"));
- usage();
- }
- sb_feat.reflink = false;
- }
-
-
- if (sb_feat.rmapbt && xi.rtname) {
- fprintf(stderr,
-_("rmapbt not supported with realtime devices\n"));
- usage();
- sb_feat.rmapbt = false;
- }
if (nsflag || nlflag) {
if (dirblocksize < blocksize ||
--
2.13.3
next prev parent reply other threads:[~2017-08-29 23:51 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-29 23:50 [PATCH 00/42] mkfs: factor the crap out of the code Dave Chinner
2017-08-29 23:50 ` [PATCH 01/42] mkfs: can't specify sector size of internal log Dave Chinner
2017-08-29 23:50 ` [PATCH 02/42] mkfs: make subopt table const Dave Chinner
2017-08-29 23:50 ` [PATCH 03/42] mkfs: introduce a structure to hold CLI options Dave Chinner
2017-08-29 23:50 ` [PATCH 04/42] mkfs: add generic subopt parsing table Dave Chinner
2017-08-29 23:50 ` [PATCH 05/42] mkfs: factor block subopts parser Dave Chinner
2017-08-29 23:50 ` [PATCH 06/42] mkfs: factor data " Dave Chinner
2017-08-29 23:50 ` [PATCH 07/42] mkfs: factor inode " Dave Chinner
2017-08-29 23:50 ` [PATCH 08/42] mkfs: factor log " Dave Chinner
2017-08-29 23:50 ` [PATCH 09/42] mkfs: factor meta " Dave Chinner
2017-08-29 23:50 ` [PATCH 10/42] mkfs: factor naming " Dave Chinner
2017-08-29 23:50 ` [PATCH 11/42] mkfs: factor rt " Dave Chinner
2017-08-29 23:50 ` [PATCH 12/42] mkfs: factor sector " Dave Chinner
2017-08-29 23:50 ` [PATCH 13/42] mkfs: Introduce mkfs configuration structure Dave Chinner
2017-08-29 23:50 ` [PATCH 14/42] mkfs: factor printing of mkfs config Dave Chinner
2017-08-29 23:50 ` [PATCH 15/42] mkfs: factor in memory superblock setup Dave Chinner
2017-08-29 23:50 ` [PATCH 16/42] mkfs: factor out device preparation Dave Chinner
2017-08-29 23:50 ` [PATCH 17/42] mkfs: factor writing AG headers Dave Chinner
2017-08-29 23:50 ` [PATCH 18/42] mkfs: factor secondary superblock updates Dave Chinner
2017-08-29 23:50 ` [PATCH 19/42] mkfs: introduce default configuration structure Dave Chinner
2017-08-29 23:50 ` [PATCH 20/42] mkfs: rename top level CLI parameters Dave Chinner
2017-08-29 23:50 ` [PATCH 21/42] mkfs: factor sectorsize validation Dave Chinner
2017-08-29 23:50 ` [PATCH 22/42] mkfs: factor blocksize validation Dave Chinner
2017-08-29 23:50 ` [PATCH 23/42] mkfs: factor log sector size validation Dave Chinner
2017-08-29 23:50 ` Dave Chinner [this message]
2017-08-29 23:50 ` [PATCH 25/42] mkfs: factor directory blocksize validation Dave Chinner
2017-08-29 23:50 ` [PATCH 26/42] mkfs: factor inode size validation Dave Chinner
2017-08-29 23:50 ` [PATCH 27/42] mkfs: factor out device size calculations Dave Chinner
2017-08-29 23:50 ` [PATCH 28/42] mkfs: fix hidden parameter in DTOBT() Dave Chinner
2017-08-29 23:50 ` [PATCH 29/42] mkfs: factor rtdev extent size validation Dave Chinner
2017-08-29 23:50 ` [PATCH 30/42] mkfs: rework stripe calculations Dave Chinner
2017-08-29 23:50 ` [PATCH 31/42] mkfs: factor device opening Dave Chinner
2017-08-29 23:50 ` [PATCH 32/42] mkfs: factor data device validation Dave Chinner
2017-08-29 23:50 ` [PATCH 33/42] mkfs: factor log " Dave Chinner
2017-08-29 23:50 ` [PATCH 34/42] mkfs: factor rt " Dave Chinner
2017-08-29 23:50 ` [PATCH 35/42] mkfs: factor AG geometry calculations Dave Chinner
2017-08-29 23:50 ` [PATCH 36/42] mkfs: factor AG alignment Dave Chinner
2017-08-30 23:44 ` Dave Chinner
2017-08-29 23:50 ` [PATCH 37/42] mkfs: rework imaxpct calculation Dave Chinner
2017-08-29 23:50 ` [PATCH 38/42] mkfs: factor initial mount setup Dave Chinner
2017-08-29 23:50 ` [PATCH 39/42] mkfs: factor log size calculations Dave Chinner
2017-09-05 5:23 ` Dave Chinner
2017-08-29 23:50 ` [PATCH 40/42] mkfs: cleanup redundant temporary code Dave Chinner
2017-08-29 23:50 ` [PATCH 41/42] mkfs: move error functions Dave Chinner
2017-08-29 23:50 ` [PATCH 42/42] mkfs: tidy up definitions Dave Chinner
2017-08-30 1:23 ` [PATCH 00/42] mkfs: factor the crap out of the code Darrick J. Wong
2017-08-30 1:57 ` Dave Chinner
2017-08-30 4:16 ` Luis R. Rodriguez
2017-08-30 5:44 ` Dave Chinner
2017-08-30 22:10 ` Luis R. Rodriguez
2017-08-30 23:22 ` Dave Chinner
2017-08-31 0:05 ` Luis R. Rodriguez
2017-08-31 16:23 ` Jan Tulak
2017-08-30 7:44 ` Martin Steigerwald
2017-09-04 12:31 ` Chandan Rajendra
2017-09-04 15:34 ` Eric Sandeen
2017-09-04 22:40 ` Dave Chinner
2017-09-07 10:31 ` Chandan Rajendra
2017-09-07 23:38 ` Dave Chinner
2017-09-09 10:24 ` Chandan Rajendra
2017-09-15 9:42 ` Jan Tulak
2017-09-16 11:29 ` Dave Chinner
2017-10-24 3:00 ` Eric Sandeen
2017-10-25 0:59 ` Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170829235052.21050-25-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).