From: Dave Chinner <david@fromorbit.com>
To: linux-xfs@vger.kernel.org
Subject: [PATCH 26/42] mkfs: factor inode size validation
Date: Wed, 30 Aug 2017 09:50:36 +1000 [thread overview]
Message-ID: <20170829235052.21050-27-david@fromorbit.com> (raw)
In-Reply-To: <20170829235052.21050-1-david@fromorbit.com>
From: Dave Chinner <dchinner@redhat.com>
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
---
mkfs/xfs_mkfs.c | 101 +++++++++++++++++++++++++++++---------------------------
1 file changed, 53 insertions(+), 48 deletions(-)
diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
index 72b21d715613..0062380254c9 100644
--- a/mkfs/xfs_mkfs.c
+++ b/mkfs/xfs_mkfs.c
@@ -2245,6 +2245,54 @@ validate_dirblocksize(
}
static void
+validate_inodesize(
+ struct mkfs_params *cfg,
+ struct cli_params *cli)
+{
+
+ if (cli->inopblock)
+ cfg->inodelog = cfg->blocklog - libxfs_highbit32(cli->inopblock);
+ else if (cli->inodesize)
+ cfg->inodelog = libxfs_highbit32(cli->inodesize);
+ else if (cfg->sb_feat.crcs_enabled)
+ cfg->inodelog = XFS_DINODE_DFL_CRC_LOG;
+ else
+ cfg->inodelog = XFS_DINODE_DFL_LOG;
+
+ cfg->inodesize = 1 << cfg->inodelog;
+ cfg->inopblock = cfg->blocksize / cfg->inodesize;
+
+ /* input parsing has already validated non-crc inode size range */
+ if (cfg->sb_feat.crcs_enabled &&
+ cfg->inodelog < XFS_DINODE_DFL_CRC_LOG) {
+ fprintf(stderr,
+ _("Minimum inode size for CRCs is %d bytes\n"),
+ 1 << XFS_DINODE_DFL_CRC_LOG);
+ usage();
+ }
+
+ if (cfg->inodesize > cfg->blocksize / XFS_MIN_INODE_PERBLOCK ||
+ cfg->inopblock < XFS_MIN_INODE_PERBLOCK ||
+ cfg->inodesize < XFS_DINODE_MIN_SIZE ||
+ cfg->inodesize > XFS_DINODE_MAX_SIZE) {
+ int maxsz;
+
+ fprintf(stderr, _("illegal inode size %d\n"), cfg->inodesize);
+ maxsz = MIN(cfg->blocksize / XFS_MIN_INODE_PERBLOCK,
+ XFS_DINODE_MAX_SIZE);
+ if (XFS_DINODE_MIN_SIZE == maxsz)
+ fprintf(stderr,
+ _("allowable inode size with %d byte blocks is %d\n"),
+ cfg->blocksize, XFS_DINODE_MIN_SIZE);
+ else
+ fprintf(stderr,
+ _("allowable inode size with %d byte blocks is between %d and %d\n"),
+ cfg->blocksize, XFS_DINODE_MIN_SIZE, maxsz);
+ exit(1);
+ }
+}
+
+static void
print_mkfs_cfg(
struct mkfs_params *cfg,
char *dfile,
@@ -2889,13 +2937,10 @@ main(
int dsflag;
int force_overwrite;
struct fsxattr fsx;
- int ilflag;
int imaxpct;
int imflag;
int inodelog;
int inopblock;
- int ipflag;
- int isflag;
int isize;
char *label = NULL;
int laflag;
@@ -3001,7 +3046,7 @@ main(
cli.loginternal = 1; /* internal by default */
agsize = daflag = dasize = dblocks = 0;
- ilflag = imflag = ipflag = isflag = 0;
+ imflag = 0;
liflag = laflag = lsflag = lsuflag = lsunitflag = ldflag = lvflag = 0;
loginternal = 1;
logagno = logblocks = rtblocks = rtextblocks = 0;
@@ -3061,13 +3106,6 @@ main(
parse_subopts(c, optarg, &cli);
/* temp don't break code */
- isize = cli.inodesize;
- inodelog = libxfs_highbit32(isize);
- inopblock = cli.inopblock;
- ilflag = cli_opt_set(&iopts, I_LOG);
- isflag = cli_opt_set(&iopts, I_SIZE);
- ipflag = cli_opt_set(&iopts, I_PERBLOCK);
-
imaxpct = cli.imaxpct;
imflag = cli_opt_set(&iopts, I_MAXPCT);
/* end temp don't break code */
@@ -3166,6 +3204,7 @@ main(
* the cfg structure for them, not the command line structure.
*/
validate_dirblocksize(&cfg, &cli);
+ validate_inodesize(&cfg, &cli);
/* temp don't break code */
sectorsize = cfg.sectorsize;
@@ -3178,6 +3217,9 @@ main(
platform_uuid_copy(&uuid, &cfg.uuid);
dirblocksize = cfg.dirblocksize;
dirblocklog = cfg.dirblocklog;
+ isize = cfg.inodesize;
+ inodelog = cfg.inodelog;
+ inopblock = cfg.inopblock;
/* end temp don't break code */
if (dsize) {
@@ -3197,21 +3239,6 @@ main(
(long long)dbytes, blocksize,
(long long)(dblocks << blocklog));
}
- if (ipflag) {
- inodelog = blocklog - libxfs_highbit32(inopblock);
- isize = 1 << inodelog;
- } else if (!ilflag && !isflag) {
- inodelog = sb_feat.crcs_enabled ? XFS_DINODE_DFL_CRC_LOG
- : XFS_DINODE_DFL_LOG;
- isize = 1 << inodelog;
- }
- if (sb_feat.crcs_enabled && inodelog < XFS_DINODE_DFL_CRC_LOG) {
- fprintf(stderr,
- _("Minimum inode size for CRCs is %d bytes\n"),
- 1 << XFS_DINODE_DFL_CRC_LOG);
- usage();
- }
-
if (logsize) {
uint64_t logbytes;
@@ -3290,28 +3317,6 @@ main(
}
ASSERT(rtextblocks);
- /*
- * Check some argument sizes against mins, maxes.
- */
- if (isize > blocksize / XFS_MIN_INODE_PERBLOCK ||
- isize < XFS_DINODE_MIN_SIZE ||
- isize > XFS_DINODE_MAX_SIZE) {
- int maxsz;
-
- fprintf(stderr, _("illegal inode size %d\n"), isize);
- maxsz = MIN(blocksize / XFS_MIN_INODE_PERBLOCK,
- XFS_DINODE_MAX_SIZE);
- if (XFS_DINODE_MIN_SIZE == maxsz)
- fprintf(stderr,
- _("allowable inode size with %d byte blocks is %d\n"),
- blocksize, XFS_DINODE_MIN_SIZE);
- else
- fprintf(stderr,
- _("allowable inode size with %d byte blocks is between %d and %d\n"),
- blocksize, XFS_DINODE_MIN_SIZE, maxsz);
- exit(1);
- }
-
calc_stripe_factors(dsu, dsw, sectorsize, lsu, lsectorsize,
&dsunit, &dswidth, &lsunit);
--
2.13.3
next prev parent reply other threads:[~2017-08-29 23:51 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-29 23:50 [PATCH 00/42] mkfs: factor the crap out of the code Dave Chinner
2017-08-29 23:50 ` [PATCH 01/42] mkfs: can't specify sector size of internal log Dave Chinner
2017-08-29 23:50 ` [PATCH 02/42] mkfs: make subopt table const Dave Chinner
2017-08-29 23:50 ` [PATCH 03/42] mkfs: introduce a structure to hold CLI options Dave Chinner
2017-08-29 23:50 ` [PATCH 04/42] mkfs: add generic subopt parsing table Dave Chinner
2017-08-29 23:50 ` [PATCH 05/42] mkfs: factor block subopts parser Dave Chinner
2017-08-29 23:50 ` [PATCH 06/42] mkfs: factor data " Dave Chinner
2017-08-29 23:50 ` [PATCH 07/42] mkfs: factor inode " Dave Chinner
2017-08-29 23:50 ` [PATCH 08/42] mkfs: factor log " Dave Chinner
2017-08-29 23:50 ` [PATCH 09/42] mkfs: factor meta " Dave Chinner
2017-08-29 23:50 ` [PATCH 10/42] mkfs: factor naming " Dave Chinner
2017-08-29 23:50 ` [PATCH 11/42] mkfs: factor rt " Dave Chinner
2017-08-29 23:50 ` [PATCH 12/42] mkfs: factor sector " Dave Chinner
2017-08-29 23:50 ` [PATCH 13/42] mkfs: Introduce mkfs configuration structure Dave Chinner
2017-08-29 23:50 ` [PATCH 14/42] mkfs: factor printing of mkfs config Dave Chinner
2017-08-29 23:50 ` [PATCH 15/42] mkfs: factor in memory superblock setup Dave Chinner
2017-08-29 23:50 ` [PATCH 16/42] mkfs: factor out device preparation Dave Chinner
2017-08-29 23:50 ` [PATCH 17/42] mkfs: factor writing AG headers Dave Chinner
2017-08-29 23:50 ` [PATCH 18/42] mkfs: factor secondary superblock updates Dave Chinner
2017-08-29 23:50 ` [PATCH 19/42] mkfs: introduce default configuration structure Dave Chinner
2017-08-29 23:50 ` [PATCH 20/42] mkfs: rename top level CLI parameters Dave Chinner
2017-08-29 23:50 ` [PATCH 21/42] mkfs: factor sectorsize validation Dave Chinner
2017-08-29 23:50 ` [PATCH 22/42] mkfs: factor blocksize validation Dave Chinner
2017-08-29 23:50 ` [PATCH 23/42] mkfs: factor log sector size validation Dave Chinner
2017-08-29 23:50 ` [PATCH 24/42] mkfs: factor superblock feature validation Dave Chinner
2017-08-29 23:50 ` [PATCH 25/42] mkfs: factor directory blocksize validation Dave Chinner
2017-08-29 23:50 ` Dave Chinner [this message]
2017-08-29 23:50 ` [PATCH 27/42] mkfs: factor out device size calculations Dave Chinner
2017-08-29 23:50 ` [PATCH 28/42] mkfs: fix hidden parameter in DTOBT() Dave Chinner
2017-08-29 23:50 ` [PATCH 29/42] mkfs: factor rtdev extent size validation Dave Chinner
2017-08-29 23:50 ` [PATCH 30/42] mkfs: rework stripe calculations Dave Chinner
2017-08-29 23:50 ` [PATCH 31/42] mkfs: factor device opening Dave Chinner
2017-08-29 23:50 ` [PATCH 32/42] mkfs: factor data device validation Dave Chinner
2017-08-29 23:50 ` [PATCH 33/42] mkfs: factor log " Dave Chinner
2017-08-29 23:50 ` [PATCH 34/42] mkfs: factor rt " Dave Chinner
2017-08-29 23:50 ` [PATCH 35/42] mkfs: factor AG geometry calculations Dave Chinner
2017-08-29 23:50 ` [PATCH 36/42] mkfs: factor AG alignment Dave Chinner
2017-08-30 23:44 ` Dave Chinner
2017-08-29 23:50 ` [PATCH 37/42] mkfs: rework imaxpct calculation Dave Chinner
2017-08-29 23:50 ` [PATCH 38/42] mkfs: factor initial mount setup Dave Chinner
2017-08-29 23:50 ` [PATCH 39/42] mkfs: factor log size calculations Dave Chinner
2017-09-05 5:23 ` Dave Chinner
2017-08-29 23:50 ` [PATCH 40/42] mkfs: cleanup redundant temporary code Dave Chinner
2017-08-29 23:50 ` [PATCH 41/42] mkfs: move error functions Dave Chinner
2017-08-29 23:50 ` [PATCH 42/42] mkfs: tidy up definitions Dave Chinner
2017-08-30 1:23 ` [PATCH 00/42] mkfs: factor the crap out of the code Darrick J. Wong
2017-08-30 1:57 ` Dave Chinner
2017-08-30 4:16 ` Luis R. Rodriguez
2017-08-30 5:44 ` Dave Chinner
2017-08-30 22:10 ` Luis R. Rodriguez
2017-08-30 23:22 ` Dave Chinner
2017-08-31 0:05 ` Luis R. Rodriguez
2017-08-31 16:23 ` Jan Tulak
2017-08-30 7:44 ` Martin Steigerwald
2017-09-04 12:31 ` Chandan Rajendra
2017-09-04 15:34 ` Eric Sandeen
2017-09-04 22:40 ` Dave Chinner
2017-09-07 10:31 ` Chandan Rajendra
2017-09-07 23:38 ` Dave Chinner
2017-09-09 10:24 ` Chandan Rajendra
2017-09-15 9:42 ` Jan Tulak
2017-09-16 11:29 ` Dave Chinner
2017-10-24 3:00 ` Eric Sandeen
2017-10-25 0:59 ` Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170829235052.21050-27-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).