From: Dave Chinner <david@fromorbit.com>
To: linux-xfs@vger.kernel.org
Subject: [PATCH 27/42] mkfs: factor out device size calculations
Date: Wed, 30 Aug 2017 09:50:37 +1000 [thread overview]
Message-ID: <20170829235052.21050-28-david@fromorbit.com> (raw)
In-Reply-To: <20170829235052.21050-1-david@fromorbit.com>
From: Dave Chinner <dchinner@redhat.com>
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
---
mkfs/xfs_mkfs.c | 94 ++++++++++++++++++++++++++-------------------------------
1 file changed, 43 insertions(+), 51 deletions(-)
diff --git a/mkfs/xfs_mkfs.c b/mkfs/xfs_mkfs.c
index 0062380254c9..e7e366cc518c 100644
--- a/mkfs/xfs_mkfs.c
+++ b/mkfs/xfs_mkfs.c
@@ -2292,6 +2292,37 @@ validate_inodesize(
}
}
+static xfs_rfsblock_t
+calc_dev_size(
+ char *size,
+ struct mkfs_params *cfg,
+ struct opt_params *opts,
+ int sizeopt,
+ char *type)
+{
+ uint64_t dbytes;
+ xfs_rfsblock_t dblocks;
+
+ if (!size)
+ return 0;
+
+ dbytes = getnum(size, opts, sizeopt);
+ if (dbytes % XFS_MIN_BLOCKSIZE) {
+ fprintf(stderr,
+ _("illegal %s length %lld, not a multiple of %d\n"),
+ type, (long long)dbytes, XFS_MIN_BLOCKSIZE);
+ usage();
+ }
+ dblocks = (xfs_rfsblock_t)(dbytes >> cfg->blocklog);
+ if (dbytes % cfg->blocksize) {
+ fprintf(stderr,
+_("warning: %s length %lld not a multiple of %d, truncated to %lld\n"),
+ type, (long long)dbytes, cfg->blocksize,
+ (long long)(dblocks << cfg->blocklog));
+ }
+ return dblocks;
+}
+
static void
print_mkfs_cfg(
struct mkfs_params *cfg,
@@ -3206,6 +3237,15 @@ main(
validate_dirblocksize(&cfg, &cli);
validate_inodesize(&cfg, &cli);
+ /*
+ * if the device size was specified convert it to a block count
+ * now we have a valid block size. These will be set to zero if
+ * nothing was specified, indicating we should use the full device.
+ */
+ cfg.dblocks = calc_dev_size(cli.dsize, &cfg, &dopts, D_SIZE, "data");
+ cfg.logblocks = calc_dev_size(cli.logsize, &cfg, &lopts, L_SIZE, "log");
+ cfg.rtblocks = calc_dev_size(cli.rtsize, &cfg, &ropts, R_SIZE, "rt");
+
/* temp don't break code */
sectorsize = cfg.sectorsize;
sectorlog = cfg.sectorlog;
@@ -3220,59 +3260,11 @@ main(
isize = cfg.inodesize;
inodelog = cfg.inodelog;
inopblock = cfg.inopblock;
+ dblocks = cfg.dblocks;
+ logblocks = cfg.logblocks;
+ rtblocks = cfg.rtblocks;
/* end temp don't break code */
- if (dsize) {
- uint64_t dbytes;
-
- dbytes = getnum(dsize, &dopts, D_SIZE);
- if (dbytes % XFS_MIN_BLOCKSIZE) {
- fprintf(stderr,
- _("illegal data length %lld, not a multiple of %d\n"),
- (long long)dbytes, XFS_MIN_BLOCKSIZE);
- usage();
- }
- dblocks = (xfs_rfsblock_t)(dbytes >> blocklog);
- if (dbytes % blocksize)
- fprintf(stderr, _("warning: "
- "data length %lld not a multiple of %d, truncated to %lld\n"),
- (long long)dbytes, blocksize,
- (long long)(dblocks << blocklog));
- }
- if (logsize) {
- uint64_t logbytes;
-
- logbytes = getnum(logsize, &lopts, L_SIZE);
- if (logbytes % XFS_MIN_BLOCKSIZE) {
- fprintf(stderr,
- _("illegal log length %lld, not a multiple of %d\n"),
- (long long)logbytes, XFS_MIN_BLOCKSIZE);
- usage();
- }
- logblocks = (xfs_rfsblock_t)(logbytes >> blocklog);
- if (logbytes % blocksize)
- fprintf(stderr,
- _("warning: log length %lld not a multiple of %d, truncated to %lld\n"),
- (long long)logbytes, blocksize,
- (long long)(logblocks << blocklog));
- }
- if (rtsize) {
- uint64_t rtbytes;
-
- rtbytes = getnum(rtsize, &ropts, R_SIZE);
- if (rtbytes % XFS_MIN_BLOCKSIZE) {
- fprintf(stderr,
- _("illegal rt length %lld, not a multiple of %d\n"),
- (long long)rtbytes, XFS_MIN_BLOCKSIZE);
- usage();
- }
- rtblocks = (xfs_rfsblock_t)(rtbytes >> blocklog);
- if (rtbytes % blocksize)
- fprintf(stderr,
- _("warning: rt length %lld not a multiple of %d, truncated to %lld\n"),
- (long long)rtbytes, blocksize,
- (long long)(rtblocks << blocklog));
- }
/*
* If specified, check rt extent size against its constraints.
*/
--
2.13.3
next prev parent reply other threads:[~2017-08-29 23:51 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-29 23:50 [PATCH 00/42] mkfs: factor the crap out of the code Dave Chinner
2017-08-29 23:50 ` [PATCH 01/42] mkfs: can't specify sector size of internal log Dave Chinner
2017-08-29 23:50 ` [PATCH 02/42] mkfs: make subopt table const Dave Chinner
2017-08-29 23:50 ` [PATCH 03/42] mkfs: introduce a structure to hold CLI options Dave Chinner
2017-08-29 23:50 ` [PATCH 04/42] mkfs: add generic subopt parsing table Dave Chinner
2017-08-29 23:50 ` [PATCH 05/42] mkfs: factor block subopts parser Dave Chinner
2017-08-29 23:50 ` [PATCH 06/42] mkfs: factor data " Dave Chinner
2017-08-29 23:50 ` [PATCH 07/42] mkfs: factor inode " Dave Chinner
2017-08-29 23:50 ` [PATCH 08/42] mkfs: factor log " Dave Chinner
2017-08-29 23:50 ` [PATCH 09/42] mkfs: factor meta " Dave Chinner
2017-08-29 23:50 ` [PATCH 10/42] mkfs: factor naming " Dave Chinner
2017-08-29 23:50 ` [PATCH 11/42] mkfs: factor rt " Dave Chinner
2017-08-29 23:50 ` [PATCH 12/42] mkfs: factor sector " Dave Chinner
2017-08-29 23:50 ` [PATCH 13/42] mkfs: Introduce mkfs configuration structure Dave Chinner
2017-08-29 23:50 ` [PATCH 14/42] mkfs: factor printing of mkfs config Dave Chinner
2017-08-29 23:50 ` [PATCH 15/42] mkfs: factor in memory superblock setup Dave Chinner
2017-08-29 23:50 ` [PATCH 16/42] mkfs: factor out device preparation Dave Chinner
2017-08-29 23:50 ` [PATCH 17/42] mkfs: factor writing AG headers Dave Chinner
2017-08-29 23:50 ` [PATCH 18/42] mkfs: factor secondary superblock updates Dave Chinner
2017-08-29 23:50 ` [PATCH 19/42] mkfs: introduce default configuration structure Dave Chinner
2017-08-29 23:50 ` [PATCH 20/42] mkfs: rename top level CLI parameters Dave Chinner
2017-08-29 23:50 ` [PATCH 21/42] mkfs: factor sectorsize validation Dave Chinner
2017-08-29 23:50 ` [PATCH 22/42] mkfs: factor blocksize validation Dave Chinner
2017-08-29 23:50 ` [PATCH 23/42] mkfs: factor log sector size validation Dave Chinner
2017-08-29 23:50 ` [PATCH 24/42] mkfs: factor superblock feature validation Dave Chinner
2017-08-29 23:50 ` [PATCH 25/42] mkfs: factor directory blocksize validation Dave Chinner
2017-08-29 23:50 ` [PATCH 26/42] mkfs: factor inode size validation Dave Chinner
2017-08-29 23:50 ` Dave Chinner [this message]
2017-08-29 23:50 ` [PATCH 28/42] mkfs: fix hidden parameter in DTOBT() Dave Chinner
2017-08-29 23:50 ` [PATCH 29/42] mkfs: factor rtdev extent size validation Dave Chinner
2017-08-29 23:50 ` [PATCH 30/42] mkfs: rework stripe calculations Dave Chinner
2017-08-29 23:50 ` [PATCH 31/42] mkfs: factor device opening Dave Chinner
2017-08-29 23:50 ` [PATCH 32/42] mkfs: factor data device validation Dave Chinner
2017-08-29 23:50 ` [PATCH 33/42] mkfs: factor log " Dave Chinner
2017-08-29 23:50 ` [PATCH 34/42] mkfs: factor rt " Dave Chinner
2017-08-29 23:50 ` [PATCH 35/42] mkfs: factor AG geometry calculations Dave Chinner
2017-08-29 23:50 ` [PATCH 36/42] mkfs: factor AG alignment Dave Chinner
2017-08-30 23:44 ` Dave Chinner
2017-08-29 23:50 ` [PATCH 37/42] mkfs: rework imaxpct calculation Dave Chinner
2017-08-29 23:50 ` [PATCH 38/42] mkfs: factor initial mount setup Dave Chinner
2017-08-29 23:50 ` [PATCH 39/42] mkfs: factor log size calculations Dave Chinner
2017-09-05 5:23 ` Dave Chinner
2017-08-29 23:50 ` [PATCH 40/42] mkfs: cleanup redundant temporary code Dave Chinner
2017-08-29 23:50 ` [PATCH 41/42] mkfs: move error functions Dave Chinner
2017-08-29 23:50 ` [PATCH 42/42] mkfs: tidy up definitions Dave Chinner
2017-08-30 1:23 ` [PATCH 00/42] mkfs: factor the crap out of the code Darrick J. Wong
2017-08-30 1:57 ` Dave Chinner
2017-08-30 4:16 ` Luis R. Rodriguez
2017-08-30 5:44 ` Dave Chinner
2017-08-30 22:10 ` Luis R. Rodriguez
2017-08-30 23:22 ` Dave Chinner
2017-08-31 0:05 ` Luis R. Rodriguez
2017-08-31 16:23 ` Jan Tulak
2017-08-30 7:44 ` Martin Steigerwald
2017-09-04 12:31 ` Chandan Rajendra
2017-09-04 15:34 ` Eric Sandeen
2017-09-04 22:40 ` Dave Chinner
2017-09-07 10:31 ` Chandan Rajendra
2017-09-07 23:38 ` Dave Chinner
2017-09-09 10:24 ` Chandan Rajendra
2017-09-15 9:42 ` Jan Tulak
2017-09-16 11:29 ` Dave Chinner
2017-10-24 3:00 ` Eric Sandeen
2017-10-25 0:59 ` Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170829235052.21050-28-david@fromorbit.com \
--to=david@fromorbit.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).